3M PPS 2.0 Spray Gun Cup, Lids and Liners Kit, 26328, Micro, 3 Ounces, 125-Micron Filter, Use for Cars, Furniture, House and More, 1 Mini Paint Cup, 50 Micro Liners, 50 Lids, 32 Sealing Plugs

Make sure the gun's configuration is right and the air pressure is correct

You will need a pressure cup to use the Fuji Gun T70 for bottom (pressure) feeding (be sure to use the larger 28 oz liners, or the smaller 22 oz liners if you prefer). As you insert the liner into the H/O cup, you will find a special "collar" (lock ring) included to help secure the lid to the cup. You can use it with 13.4 oz, or 5 oz if you have a 5 oz container. A medium-sized 5 oz liner, or a mini-6 oz liner, or a micro-3 oz liner). For the "Midi"/13, the separate lid (without lock ring) is available. #26151 is the number on the 5 oz H/O cup. Here are three notes In order to replace the liners in the PPS cups with an HVLP system, this whole "H/O" cup system must be used to apply the pressure that is needed to remove the fluid from the liners. The H/O cups designed for this application do not need to be used if there is a relatively powerful compressor system (not a turbine fan system like Fuji's). Regarding the Fuji system, there is good information on Phelps Refinishing's site as well as a video on YT by Matt Hickman entitled In a recent blog post, 0 system, problem solved, I explain how to assemble all of this. Despite the lack of written instructions out there regarding the 3M PPS system specifically working with the Fuji HVLP system (I only found 3 or 4 YouTube videos on the subject), these two resources helped me learn more about how it works and how to ensure it works with the Fuji System. #3 - Note If you didn't figure it out already, you will need a S-format adapter The 3M PPS 2 will be made by way of assembly line 18 (#26054). Using the Fuji T70 spray gun, a 0 system can be used (the T75 spray gun has a different adapter and a different spray cup). The following is note #4 to take note of As far as I can tell, the 3 oz liner will work in the 13-oz tube. H/O pressurized cup is the 5 oz "Midi" size, however, it is not included in the 3M PPS handbook for use with the H/O pressurized cups. It must work for other people, since I haven't tried it yet. Refinishing offers kits for the 13 in their products. This cup will fit in the 5 oz H/O cup and the 3 oz liners, so perhaps it will work

A wider hole and four tabs on the adapter make this adapter match the second generation.

Thank you for your kind words, Michael. You have asked a good question. Thank you. PPS 2 is part of the 3M 26301 series. The 3M 26580 Accuspray Paint Spray Gun System with PPS 2 Spray Cup with Lids and Liners is compatible with the 3M 26580 Spray Gun Cup, Lids and Liners Kit, Standard 22 ounces.