RAPTOR Black UP4883 Bedliner 13.02 Oz 2K Aerosol, 7d-3 Cubic_Meters, 400ml
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It's not going to happen. MAYBE 2 if you are only coating the exterior face, 4 is more appropriate. HOWEVER, THE RESULTS ARE SHARP WHEN THEY ARE FINISHED. Don't make mistakes with your prep. Wet sanding is all that is necessary. Put down a tarp or sheet, or wipe it down with acetone to remove the grease. Then wipe it down with acetone to remove the moisture. Overspray is sticky and will not wash off it will remain on surfaces for a long time. It's like brand new. I painted my whole truck with it, and the sprayer gun and bottles.
In my opinion, it is only needed when the bare metal is being used.
It wouldn't hurt to double coat the product if it is being used on a surface that will be subject to wear and tear. Make sure you clean your gun (if you use one) thoroughly with acetone after every bottle you use.
Those are the ones I did, and they are fantastic
Selected User Reviews For RAPTOR Black UP4883 Bedliner 13.02 Oz 2K Aerosol, 7d-3 Cubic_Meters, 400ml
many others have said, one can of the spray is not enough to cover a large area, so this is definitely a great time to order plenty In my original plan, I was going to spray a ProTech truck box with two coats of two-coat I ordered 4x cans thinking I could easily get a single coat from at least 2x cans but found that 3x barely covered 1x coat. Based on the comments in the reviews, I would recommend getting a single coat from 2x cans. With only 1x can left, I was only able to complete a 2nd coat on the front face and lid of my box before being completely out of paint, which was unfortunate and highly frustrating. For the price that they charge per can and the small amount of space it really covers, you'd think they would be able to supply you at least a 16-quart size There are 18 ounces in the.
My Chevy Avalanche's bottom body panels were covered with two cans of this product two coats were applied. I'm very pleased with the results. I was surprised at how well the outcome turned out.
on the grill of my girlfriend's Jeep, so I did the grill myself. Our initial attempt was to sand it all down and reapply this stuff, and so far it has been working well. My local paint shop charged double. The price at Amazon was better. I needed 2 cans, but my local paint shop had double the price.
It is only operator error that is responsible for all the imperfections. That being said, this is awesome stuff! I needed something to cover a spot on my car, and this did the job. The top is covered with a unique material. I have a few things to say. 2.
THERE IS A LOT OF IMPORTANCE TO PREPARATION! You will be glad you did. In order to fill the bare metal spots, I applied an etching primer and cleaned the area with acetone (uses to remove wax and degreaser). A microfiber cloth was used to wipe everything with alcohol after it was sanded and cleaned. A dry wipe was applied to all surfaces. 2.
Do everything you can to prepare. Make sure you have all the materials and tools on hand.
I will conduct the next project in a slightly different way. In order to properly mask the car, I must make sure to mask properly. Masking tape stuck to parts of the face but not to others. A bit of blow back was experienced. The mistake was entirely my fault. I should have practiced getting the right distance for spraying, because that is a very important thing to keep in mind when spraying. This will enable me to do many other parts of the car. I am going to purchase another can. Now that I know how to do it, I can do it better this time!.
First of all, I followed the instructions to the letter, shook for a long period of time, etc. It looks like half of the texturing stuff came out during the first second of the scene. . . There was a lot of lumpiness at the beginning of the spray and then it was The seams of the can have a little bit of rust. The second can can be described as follows As soon as I pressed it, the nozzle stuck down The entire can had to be used in one go. The top of the can was covered in rust after it had been empty - so I popped it off and discovered the trouble. I believe that the plastic caught on it. I found that the color of the second can (blue) was quite different from the first This is what it says in the third When I tried to shake the can, it No one pressed on me. It does not seem to be leaking, but it does not feel pressured. As soon as Amazon realized the error, they The replacement can looks like this It matched the first can in terms of color, and it was of good consistency. The can was rusted at some of the seams, but not at its All in all, this is not recommended for the price, as 2/3 of the cans were defective, and ALL of the cans had rust on them (it appears that a quality issue or improper storage was involved). It is very sticky to paint itself, as well Mask everything as best as you can But the adhesive seems to be holding up A hard surface was formed. The trailer is still in the process of building, so I can't comment on how durable it will be, but so far it seems like it will.
It was important to me to find a spray can of blue bedliner, and Raptor offered the shade I wanted. There were just two coats of paint on a small 2x2 board that I had to do, so one can gave me one coat on the back and two on the front (I had to buy two to be sure i Whenever you are going to do a large number of coats, make sure you buy a large can and spray it on with a sprayer, as you should anyway, I suppose. If you don't get enough coverage with the 5 gallon size for painting trucks, vehicles, etc, think about doing a thick texture paint instead, as it yields more coverage than regular spray paint. The coverage chart is on the company's website and make sure you leave some extra. Add one more. In regards to the spray cans, they are for small jobs or touch ups. Once you mix the spray can, you have to use it within 60 minutes, and the cans as well, as it is a two part product. According to the directions, be careful when spraying. That's how I created the texture I wished for. My step has been met with great results, and others who have seen it are also pleased. My truck camper is equipped with stairs that are made of this, and I used this material to cover a board that I use as a step into and out of my truck.
You should only do what you have planned. There is a good amount of product in the container, but you will run out if you don't plan how you will touch up. I would recommend painting 3 coats if you can, 20 minutes between each is just too little time. To be on the safe side, I recommend 15 minutes between coats. As my application got harder to get out of the can, I became more concerned. As well, the product you must use to clear the nozzle after each coating will startle you when you clear the can after every coating is completed. Make sure you clear the can of your current project and save at least 10% every time. That adds up to 20% by the end.
The adhesion promoter and aerosol cans made coating the chrome grille on my 2017 Ford F250 easy and went smoothly, as I am not good at using paint and these products made it so easy. I strongly recommend them for grilles, bumpers, badges and more.