Master Airbrush Deluxe Airbrush 3 in 1 Cleaning Pot with Holder; Cleans Airbrush, Holds Airbrush, Color Palette Lid, Filters

I had a fantastic time. This is most likely designed for less expensive makeup airbrushes or other items; I bring this up because another reviewer claimed that their airbrush did not fit in it. That may be true for some airbrushes, but it is not true for all. If you get this cheap cleaning pot, I'm guessing you'll also get a cheap makeup airbrush (which is probably what this pot was made for, not other super high-end airbrushes). That said, if you have a less expensive airbrush (which is likely the case if you're considering this less expensive cleaning pot), it should work fine; I'm sure different high-end stuff is great, and if you have a high-end airbrush, then sure, buy their matching 20. 00 pot to clean If not, this one will suffice; I've found that working with a cheap airbrush and compressor is easier than working with cheap paints when airbrushing. As several online videos demonstrate, you can mix inexpensive acrylics with alcohol. However, if you don't mix it properly, you'll end up with more spatters and clogs. If you're trying to save money by using a low-cost airbrush, compressor, or cleaning pot, practice mixing your paints until you get it right, or buy pre-mixed name-brand "real" airbrush paints. I've had good luck with a mixture of 1 part pouring paint and 2 parts 91% alcohol (mixed very well). Wishing you luck and a lot of fun with your hobby!.

Jazmin Morales

| Aug 06, 2021

While the pot appears to be a useful addition to the tools, the grooves for the top and bottom wire holder/stands were far too shallow and narrow. I tried numerous times to get them in before finally using a Dremel to punch them through and widen them. Following that, the pieces fit snugly and without difficulty. For such a simple design, it takes far too much effort.

Elliana Contreras

| Sep 26, 2021

I was able to use it right away with my Iwata Neo TRN- There was no need for a dremel in this project. I simply pressed the nozzle into the rubber opening and pressed the trigger handle against the holder stand, and the sprayer began automatically spraying into the part, as you can see from the fumes rising from the filter vents. It's a must-have accessory for anyone who uses an airbrush. There will be no more splattering on paper towels. There will be no more messes to clean up. Simply clean the jar by rinsing it out. This is a must have!.

Riggs Shea

| Aug 17, 2021

tested. So far, it appears to be working. My only complaint is that mine came with paint in the pot (as well as some stains on the outside). I'm not too concerned about it because I'm probably going to do the same thing, but I did buy this brand new and received a used item. However, the trouble of returning is not worth it.

Skye IQBAL

| Oct 28, 2021

This is what I'm using to clean my airbrush, and it's perfect. br>I'm pouring inexpensive glass cleaner into the cup, then spraying it into this container, which keeps it clean and secures the airbrush when I need to put it down. br>Has a nice weight to it and appears to be well-made.

Nicholas Ellison

| Sep 30, 2021

The product was fine until I snagged it with my airbrush hose, dropped it to the floor, and broke it into approximately 1000 pieces.

Nina McMillan

| Sep 20, 2021

It turned out to be a lot better than I had hoped for. A solid metal airbrush holder is attached to a thick, heavy glass jar. It's possible that you'll need to make minor adjustments to accommodate mac valves or triggers. Do yourself a favor and avoid bending it while it is still attached to the lid. Bend slowly while using vice grips and a good pair of pliers.

Kelvin Salazar

| May 20, 2021

It's well-made and affordable, and it does exactly what you need it to do for airbrushing.

Bailee Singleton

| Dec 25, 2020