Wheel Stand Pro S Compatible with Saitek Logitech Pro Flight/Cessna Yoke System; Yoke Support; Deluxe V2; Wheel Stand Only Flight System Not Included.

Honeycomb aeronautics yoke is used as well. Based on a few reviews that I read, I took the leap of faith based on my current opinion that this will work with the Honeycomb yoke as that one is a far greater improvement than that of the Saitek/Logitech yoke. Please see our photo from last month below which show you the way I attached the Honeycomb to the Logitech yoke, simply by mounting it on a clamp by which the Honeycomb normally straps on the plate/bar. It works good and now we can go out for dinner. I found it comfortable and sturdy for my knees and other joints. For misleading you about this doing work with the Honeycomb, it's great if you don't mind wearing clamps, but still make a work for the Honeycomb. In my previous post, I announced I had added the saitek throttle quadrant because it is easy to make, as you won't have to extend much above Logitech's yoke. The desk hub I used to manage the cable I mounted on the extended bar was also bought to assist with USB connectivity. My tip to the seller would be a tip to the seller. I would be most pleased if you could allow the cable to connect to and not to extirpise to the main shaft or column if possible. Despite everything the seller's youtube video is clear and easy to understand, the items cannot be wrapped tightly around the outside - the seller has included instructions that are worthless. Furthermore, this item is lightweight, adjustable, and comfortable. My backpack is not heavy enough to impede my ability to play music as I can easily move it out of the way if I am not using it, but is heavy enough so I feel neither side can fall off. Because it's a bit pricey I was nervous about purchasing it, but after using it I was pleasantly surprised.

Aila Kelly

| Nov 18, 2021

However, this setup does not duplicate that of a simpler setup where many different aspects can be found. My Wheel stand is mounted to just the front pylon with only feet and yokes for a freeform height. Virtual instruments can be played using only the Vive via its stand. Its design eliminates any obstructions you may have found holding it in the hand. On my computer, with a good setup, this sim setup and the real thing get pretty close at all times. Using the left Vive controller on my left wrist is the perfect way to use the yoke and PTT. In the pilot's stall, grab the controller for as long as you can reach for things on the lower left panel (e. g. The lights on your plane or the pitot heat must be turned on or off). I use the right hand to operate the pedals, and it is full of virtual controls. Using autopilot, it appears at times to interfere with readings, particularly the GPS screen, but if you zoom down on it to keep your hand on the yoke just slightly too, you'll still have adequate info. the next generation of VR headsets have more powerful graphics and are even better in the picture. There was a QR code link on the stand itself, and YouTube videos showing how to use it were included. At 20 minutes ago, I was on the computer. The product is of high quality and well built.

Ahmir Myers

| Apr 26, 2021

I am very pleased with this sturdy product. It has good support, easy mobility, and fits neatly in your pocket. This model has very few complicated configurations but I had completed and up and configured the entire stand within no more than 2 hours. Watching the video on your watch does not take long. The product provides a simple alternative to build an airplane cockpit console while allowing for an easy way to replace it. Prior to and after mounting the pictures are shown.

Gage PARKES

| Aug 05, 2021

If you think about this, you get a lot of pain. My stand's first features help me understand how to pay a reasonable price for it, because it used very quality materials that have great resistance to stains. Its materials are higher quality then those used for the Saitek tools I used to mount my enclosure. a little snag in that the nuts that support the rudders were not wn it took 2 of the nuts required to secure the rudders in place were missing but a quick run to home depot and. My flight cost 64 cents and I was prepared to take off. All of the Saitek products I supply myself are mounted on this stand, and you can clearly see how it is made to incorporate those features. It is made with the Yoke / Throttle / Trim Wheel / and rudders made with the same kind of wood. These include a switch panel, a multipanel, a radio panel, and a instrument panel. Fantastic! The fabric looks and feels great. Furthermore, if you choose to keep the lock closet when not utilizing it by rolling the 2 levers, you can slide it out of the way and slide it into your closet. It would be easiest to pair it with a dedicated USB hub, keep that connected and move the hubs in place by placing both in the stand. You might even need only 1 USB cable.

Violeta Yu

| Jun 18, 2021

Connecting everything (Logitech, especially) together is a novel way to facilitate attachment. These include flight sim controls. I'd be surprised if it takes much longer than 30 minutes to assemble (as long as the dog doesn't bark and the kids don't scream). Approximately 2 or 3 times over, over the last few years, I have acquired most of the flight sim gear needed (most notably anATP pilot license). It seems from my travels that "simple-in-design" products will have the greatest impact; in this case I suggest you try the Wheel Stand Pro. This is a great product that gets all the things that I need from my computer out of the way without destroying everything. With the fact that the device is highly configurable (at least from what I believed) and it is sturdy enough to cope with upwards of 30 pounds, I believe it's the most durable I've ever seen. I found these to be oft-incorporated with without breaking a sweat; Bottom friction locks are attached to it. notch. Although the hardware appears common on most Ace Hardware stores, reparable parts remain simple to replace. great product (). Please ignore the noise made by a man I don't respect and don't remember the name of my husband. cave". What is the best way to make them use their phones better? l! LOL!.

Clyde Valdez

| Jun 10, 2021