INJORA 1.9 Inch Tyre Set 4Pcs Beadlock Wheel Rim and Rubber Tires for 1/10 RC Crawler Axial SCX10 90046 (Black)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It seems likely that this is not the case. There are four of them in each set.
Four metal beadlock wheels, two foam tires, and four metal spoke wheels. I would modify the foam inserts to get the softness that you desire. The metal wheels are really good, the tires are okay, and the tires do not need to be replaced. Thank you for your help.
Their vented design and excellent traction make them a great choice.
Selected User Reviews For INJORA 1.9 Inch Tyre Set 4Pcs Beadlock Wheel Rim and Rubber Tires for 1/10 RC Crawler Axial SCX10 90046 (Black)
I urge you to run, Forrest. Three of these sets have been made for me so far. The silver ones were the first to be ordered. Black screws are included with this set and the pieces went together without a hitch.
This is my second order for one silver set and one black set. They have some heft to them, and the tires and foams are quite decent at this price point. **I ordered a black set and a silver There are no loose screws in the black set since it came fully assembled. Set came with silver screws, and was similar to the first silver set, with the rim secured to a screw and pushed into the ID of the tire. Even before I have begun assembling them, I found three wheels with two stripped holes in each! My approach has always been to chase out the threads on the back side of the wheel rather than go through the wheel with a screw. In addition to their appearance and weight, I chose these wheels mainly because of the rims. There were only a few dollars difference in price between these with the tires and the rims on their own, so I figured I'd just get them and have spares. It would be better to have slightly smaller OD tires than these, like 110-inch OD tyres A 114mm dial. It is unlikely I will be able to fix the wheels to function, and I don't believe I can remove the screws from the black set because the threads are likely to come loose as well. I recommend you buy the black set if you are interested in gambling. It may or may not be possible to change the tires in the future, but for now, they should be fine. The silver set would not be bought again by me, nor would I recommend it to anyone else. Wouldn't it be better if you bought something else designed with bigger screws? I have updated! Parts were sent by the seller so that these could be used. As there are no parts in the USA, it will take approximately 3 weeks to have wheels that can be used if there are any and you are experiencing issues. To build these for the build intended for these, I got a different set of chassis, and I purchased another chassis for a future build.
With this setup I ditched the stock foam (junk) and put in some Proline dual stage foam, and now these tires are the dogs best booby prize of the year. The pros are Please note
Purchasing 4 rims for 20 and 4 tires for 20 is a great deal! Please note
I've got a better grip with these than my regular stockers*- The stock tires on my redcat gen 8 have tire rub (see photo), but these rims push the tire out of the way so there is ample clearance for the tire
- - The rims are made from heavy metals Tires are soft, and they feel like they will conform to rocks and provide great traction. * Cons Please note
As the holes have paint plugged up in them, I have had to clean them out with screws in one direction, remove, then screw in the opposite direction. It's a pity I don't have thread chasers in this size - It appears that paint overspray was once again responsible for the tight hole the axle goes into. The mounting was already obstructed by the round files, so it was necessary to file them to allow clearance. However, it was a good experience all round. As a result, the tire would cost twice as much, if not three times as much as it does today.
The rims are great and the tires have a good balance between harder and softer rubber. The road surface should be soft enough for climbing but firm enough for driving. It's also fun to play with the screws and assemble the cabinet. I am extremely happy with the customer service! Metal rims with good paint are on the vehicle. If the screws aren't lubricated, the holes for the screws are tight and the screws are hard to get in. Since the screw heads for the hubs are a little soft, be careful not to strip them out. When I initially used a 1, I used an 8 instead. Hex driver 5 mm from one of those inexpensive kits that come with 50+ heads and have reasonably good After stripping a few of the first five screws, I ended up with about 12 non-usable screws and a couple I could not remove once in place. It should also be noted that some of the screws had very loose tolerances, and thus The screw stripping lesson taught me to buy a better hex driver after I stripped the screws. Moores Ideal Products (MIP) driver was what I ended up purchasing. Hex heads 5 mm in diameter. Using it on small heads is so much easier than on large ones. Moreover, it doesn't strip the screws no matter how bad their tolerance is or how soft their metal is. In addition to removing a stripped screw, I was also able to use it to remove a broken nail. Also, I started to dip the screw tips in WD40, which, when paired with the MIP driver, enabled the balance of the screws to be put in very smoothly and easily. It's amazing what a difference it makes. Furthermore, they may benefit from a layer of rust protection from WD40. It's awesome to deal with this seller! I had stripped several screws from the rim that sat poorly on the one where the tire was not well mounted. Two of them could not be fixed because I could not get them out. A request for more screws was sent to the seller. As for the stripped ones, I am planning to drill them out. As soon as I requested a replacement rim and screws, he shipped them. My overall opinion is that they look amazingly real and I could not be happier.
My reasons for ordering these were that they were such a great value. Aluminum wheels and tires were already assembled when the order arrived! Unfortunately, they did not fit my TRX 4 since they are painted/coated. This made it difficult for them to slide onto the spindle. To get them started, I had to run a screw through them. After I was able to get the rims onto the hub nut, I couldn't get the spindle to tighten down so the wheel would stay Despite the fact that I was able to get the wheel all the way onto the nut and tightened down, I had to drill and make the whole bigger on the wheel You are better off leaving these out of your TRX 4 unless you plan to modify them right out of the box.
It is an extremely well produced and beautiful set of wheels. The tires are actually made of a soft compound, but that's what they say. Sadly, I bought this for a replacement for my 1/10 Bandit or my Rustler, and the axels are too big for the mount holes. Nevertheless, it did not fit my 1/16 Traxxas Erevo with a stock 12mm hex version because it was too thin and the rims bound on the axel knuckles, but I am keeping them because they look awesome.
There are better tires than stock, but they are not for the serious hobbyist since they wear out so fast. There is little warranty. The foam is very soft, does not maintain sidewall shape well. Likewise, the wheels appear to be in good shape. The bottom part of the model is quite heavy due to the additional weight. There was the same paint issue I had with fitment issues that others have mentioned, but it can be easily fixed. My budget at the time limited what I would buy, but I'll be able to buy some better tires and foam for my next purchase. Personally, I think the size of the tire is a very important consideration Axial trail honchos only fit up to 75") The body rubs a lot against the bumper during construction, which does not give an accurate scale appearance if that's what you care about.
Related Products For INJORA 1.9 Inch Tyre Set 4Pcs Beadlock Wheel Rim and Rubber Tires for 1/10 RC Crawler Axial SCX10 90046 (Black)
