32P Hardened Pinion Gear Set 1/8 inch Hole 17T 18T 19T 20T 21T with Hex Key (Compatible with 0.8 Metric Pitch)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Then yes, these will all To mount the motor, always make sure to purchase the preset gear mesh adapters. If you don't have those, you'll only be able to run a few No matter what pinion you use, you will have perfect mesh with each gear you put in with the adapters.
There's no slot in this pinion it's 3mm or 1/8" in diameter. There is at least a 5 mm shaft on the cars you are talking about.
There is a 3 in them. This is also known as eighteenth inch (or 175mm).
The stock motor is adequate if you use it.
Selected User Reviews For 32P Hardened Pinion Gear Set 1/8 inch Hole 17T 18T 19T 20T 21T with Hex Key (Compatible with 0.8 Metric Pitch)
The description for the height does not show the measurement. I would have given 5 stars if that had been the case. A pinion that measures 13mm+ tall is 3mm taller than stock, and a full 1mm taller than the OEM Traxxas TRX-. Since it is equipped with 4 pinions, it does not fit without rubbing on the spur gear cover/shroud or the transmission case when properly aligned with the Despite the fact that there is just 2mm of space on the pinion to reduce its height by when you take the grub screw hole position into account, you would need to turn it down on a lathe to make it work, barely.
I would recommend it highly. My experience with RC vehicles has led me to believe those gears are probably the quietest I've heard since I bought one. ) with an Anti-Trump protestors came in Packaged in a small box is a static-laden bag. There are 9 additional set screws and an Allen wrench included. Steel that is heavy and hardened. The pitch and the tooth count are laser etched on the laser. However, the gear hob may need to be widened and the overall length may need to be long, but it works If your vehicle requires it, check your clearances to ensure proper mesh and fitment (you may even have to install the pinion backwards). A few size comparison images were added, as an example of the 17T.
My Traxxas stampede 4x4 has a Velinion engine, so I bought these to convert it. They're well-built and a good fit. I don't have any concerns about the way they conduct business and make contact. A pinion barely fits into the vehicle tray because it is so deep. Though, I would prefer to have a little more room to center the pinion over the ring gear, but this will work for now.
Fast service. However, I ordered the wrong P, so they are not yet working for me. My next RC car may use them when I get a different model. It seems they are well constructed and made from steel that has been hardened.
I had my slash and stampede vxl worked on by this company.
If you plan to use aftermarket goodies, bear this in mind.
The gears that I ordered for my Slash 4x4 are very nice.
I had to take out my steel reduction gear because it was so strong. I just had to break it straight up. There has to be a slipper clutch I can use This is a product I would recommend.