Castle Creations CSE010-0153-00 CC BEC 2.0 Wp, 15A Max Output Waterproof Voltage Regulator
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If it doesn't overpower the amps, I think it'll be fine.
The output voltage is set to 5 volts out of the box. With the right software and USB interface adapter, they can also be programmed to higher or lower voltages.
The output voltage must be at least 5 volts. The larger wires should be connected in parallel to your battery, according to CC. The output can now be connected to anything that requires 5-volt power. 50 volts. If your servos can handle the rail voltage (default 5.), for example, your receiver. 25V) or anything else that requires a regulated voltage, such as lights, sounds, or a smoke machine. To change the BEC to Default, you'll need to use a programmer cable and program.
Yes, keep in mind that it's only a regulated voltage output. The default value is 5. 25V.
Selected User Reviews For Castle Creations CSE010-0153-00 CC BEC 2.0 Wp, 15A Max Output Waterproof Voltage Regulator
In my E-mail, I have a waterproof version. Maxx is powered by two high-voltage servos, but I wanted a truck that was completely waterproof. I'm up to 550 oz. now. My BEC has no trouble keeping up with the torque. It can handle up to 12 volts direct, so there's almost nothing it can't handle. With a maximum output of 15 amps, this thing could easily power high-voltage servos, a winch, and a full light kit. The best part is that it's so small! This is something that could be mounted anywhere. It's roughly half the size of the previous non-profit organization. A solid aluminum case protects the waterproof BEC. This thing has to be nearly indestructible, right? Simply connect it to Castle Link and choose a voltage output. br>br>I bought a second one because I liked it so much! This one ended up in the crawler with me. When I turn the servo, my LEDs flicker a little, but I have 13 LEDs on the truck, two of which are high power, so it's not a huge draw. A Savox power hogging servo with high torque and one fan are also used. When compared to the standard 5-inch screen, On my ESC, I use an amp BEC, and it makes a huge difference.
Fortunately, I already had the ESC's link cable. However, for what it is, this item is absurdly overpriced. For a DC-powered device, there are far less expensive options available. A BEC is a DC Buck (that's what it stands for). br>br>If you don't already have the link cable, this is a waste of money. In fact, everything produced by Castle Creations is of the highest quality. Especially when you can get 'knock offs' that are made in the same factory as the original; Castle is not stamped after hours; and it is not stamped at all. All you have to do now is finish up your homework. Alternatively, you can purchase only HobbyWing.
It's a fantastic product, and I'm very pleased with it. I'm having a problem, and I'm not sure if it's because of the item or because of my receiver. My receiver timed out and disconnected from my transmitter when I selected 6V out. However, reducing the number to five is a good idea. 5. It appears that everything is in order. I'm waiting for CC's response.
It was exactly what I needed for my second project. 0 Revo. My Castle Blue Link was used to program it. The wires that come with it are also quite long.
Excellent work, BEC! This is what I'm using in my SCX6 Jeep JLU Wrangler 4WD Rock Crawler 1/6 SCX6 Jeep JLU Wrangler 4WD Jeep JLU Wrangler 4WD Jeep JLU Wrangler 4WD Jeep JLU Wrangler Directly connected to the servo, bypassing the receiver to provide maximum voltage to the servo. It's a must-have for rock-and-roll fans because it's simple to program. crawling.
It has been completely submerged and hosed down after each run with no problems!! It's nice to no longer have to worry about whether or not I did a good enough job waterproofing!.
I'm running a Promodeler 470 on it and it's working fine at 8. 4v . I like how waterproof it is.