Dynamite Prophet Sport Mini 50W Multichemistry Charger, DYNC2030, Red
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In my opinion, you should charge the battery at 1 that should deliver 1000mAh and 2 would exceed 1800mAh, but you could overheat the battery the first time.
To do so, you must use a separate adapter. There is an ec3/ic3 for it
Charge your phone by pressing and holding the Batt Type/Start/Stop buttons for three An LED will change color to indicate a change in You can stop the charging process by pressing and holding the Batt Type/Start/Stop buttons Ensure that you read your instruction manual and use the correct settings at all times to ensure safe battery charging.
Selected User Reviews For Dynamite Prophet Sport Mini 50W Multichemistry Charger, DYNC2030, Red
Straight out of the box, this wouldn't work. The LED blinks red and green, and pressing the button hardly results in any power being delivered.
In a nutshell, There has been a lot of good said about this charger and I had high hopes of getting my batteries ready for another round of fun but it has not been the case. Getting started is fairly straightforward and much of the setup is documented. However, they could clarify what charge current to use when your battery does not exactly fall between 1, 2, 3, or 4000 mA. The rest of it is simple.
1st I followed the "Operating your charger" instructions to the letter, and everything seems to be working as it should. Rather than changing from blinking green (indicating battery capacity is between 76% and 99%) to solid green (indicating battery is fully charged), all four LEDs blink red at the rate of one The charging process went smoothly until it reached the end, but at that point it failed. I found that strange. In the end, I unplugged the battery from the unit and the unit from the wall because it was late. Using the same battery the next morning, I rebooted the process and the unit proceeded through the red to green indicator lights rather quickly, then gave a solid green light with no problems at all. When I checked the battery, I confirmed that it was fully Using it for the third time After I plugged in a second battery the next morning, I noticed that the unit worked perfectly. It had the same error code this time around, about 30 minutes into a charging session. Every time I plugged the unit back into the wall (before even connecting the battery) it returned to the blinking error. I disconnected the battery and from the wall and tried plugging them back in, but the error blinks returned immediately. It was left for the afternoon and I tried it again the following The fourth use of this term is I made the video I posted showing how the unit would enter into error mode even after being unplugged for over 40 minutes without any battery at all. It was also the same problem as before with the error blinks after charging for a short period of time. In other words, I have to conclude that so far, the trickle charger has been charging my battery faster than the Prophet Sport Mini, because so much time wastes Even though I don't know how long a unit needs to remain unplugged for it to reset, regardless of how long you leave it plugged in, you won't see much of a charge before it gives an error, and you'll have to wait.
I was not able to use it This wasn't the case for me. Rather than giving the code for fully charged lights, the error message was displayed. As soon as I connected the battery to the charger, I began to charge it. If the charger detects a faulty connection, it would display an error code. It would not come on after I unplugged everything and plugged it back in again. I checked every connection and made sure my settings were correct. I ran the batteries for a while and then plugged them into the charger. The charger worked for about an hour and then the batteries stopped working. After that, I got the same error code. After I got a new charger, I checked out the volts of Having been fully charged, they were ready to go. This led to an error code rather than the charger showing a green light to indicate that they were charged. It is difficult to use because of this. When I check to see if the batteries are charged, how can I determine whether there is an actual error? I am not willing to take that risk with LiPo batteries being as delicate as they are. About a week ago, I emailed customer service, but I have not received a response yet. It is not a charger I would recommend buying.
It is dead simple to use this charger. Charge the battery with the appropriate leads and connect it to the balance lead. Make sure the battery type you select is the right one (Lipo, etc) and select the charge rate you want. When you press start, the LED will change color depending on the level of charge that is currently in the battery. My only wish is for this charger to have a dedicated Lipo balanced storage - The charge mode is on. The only way to get around this limitation is to run your battery down to a safe lower level, connect your battery to the charger, and charge it Having a battery charge of 50% is considered safe and should be left in your LOPO battery storage. Before putting your lipo battery away, it wouldn't hurt to double check the overall battery voltage as well as the voltage of each individual cell.
The following new update has been made New unit works beautifully. I replaced it with an identical one. The items were quickly shipped by Amazon. The reason why charges were failing was one I made and I wish to own up to that. As a result, I have changed this review to 4*, it works well, there are higher quality ones that my friends have, but I believe this is a great charger for the price. The original charger likely worked fine, but I made a bonehead mistake with the adaptor.
During this period, the charger provided 3-amps of power The battery will last for four charges of the RC cars. I can no longer charge anything with it, as I can only manually scroll through the battery types. Only a few months have passed since the unit was built.
One of the coolest chargers you'll ever find. It was a wonderful feeling to replace two of my older chargers that I had considered antiques. My favorite thing about the banana plug is that it gives me options on how to connect my This charger will charge my NiCd and NiMh batteries as well as a LiPo battery. By signaling with the led for that chemistry battery, it does tell you what percentage of charge you have left. It would only discharge a battery, which I kind of wish it did.
In my SCX24, I also rigged up a connection for my JST connector, because it did not come with one that fit that small I was able to use it once it was done. There will be no problems with the charger. It will charge the 2s batteries in around 25min, which is faster than the trucks will discharge while playing with them.
Related Products For Dynamite Prophet Sport Mini 50W Multichemistry Charger, DYNC2030, Red
