Bartact Roll Bar Fire Extinguisher Mount 2.5 Lb Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A Kidde fire extinguisher that has been on the market for 3 months would not fit, because it is made in China and doesn't have the same diameter as the American and Mexican As of now, all all our mounts going out have elastic in them and are able to stretch to Kidde fire extinguishers
The holder has been designed to be used on the extinguisher while it is on. As soon as you release the pressure from the velcro straps, the holder will fall from the roll bar. You simply need to pull the 2 velcro straps loose and pull the holder. If you try to remove the extinguisher from the holder while the velcro straps are pulling on the extinguisher, it will take far too long to do so.
There is no way that it can There are two 3 pound units and they are too large to fit in
You're right, it should be ok. I have a pro armor roll cage, but those straps are adjustable anyway, so they won't have any difference in the tube sizing. The only thing you need to do is to place the tube in the right place to prevent it from sliding But all Velcro mounts do the same thing.
Selected User Reviews For Bartact Roll Bar Fire Extinguisher Mount 2.5 Lb Black
For my RZR XP 900, I purchased this item to mount to my rear roll cage. Due to the length of the straps, they were too long for my rear roll cage bar. I messed with the straps so that they would work. My solution was to cut a piece of rubber insulation pipe cover and wire tie it to the roll cage, and now the straps are in place. It would be best if we could use a fire extinguisher of about 13 gallons in this setup. This is 5" long and 3 1/4" wide. If I put a Kidde® Auto marine fire extinguisher in it, it will be too short by about 3 to 4 inches.
My Can Am Maverick Trail just got this and I installed it on the roll cage today. Due to the lack of mounting instructions, I spent a little time refining the fit of mounting options and figuring out which end to mount to the roll cage and what part is the front and what part is the back. My favorite thing about this product is that it's made in the United States. The first thing that attracted me was that aspect. I really like the material, and it's made well. However, I do not know until I test it whether it will hold the fire extinguisher in place or if it will twist. I'm not concerned that it will fall off, but it just doesn't seem to be able to hold securely in place.
It accomplishes what it is supposed to. This is an awesome product! I'm totally addicted to buying stuff for my Jeep JK Rubicon and this is an outstanding product. When mounted to your roll bar, it does just what it's supposed to do It's constructed from high-quality materials, and it provides the following features Extinguishers are held perfectly and securely in place by the device. The hint is You shouldn't assume installation will be straightforward just because this item is shipped without instructions. There are no tools required to install this item. There's no need for that! There is a great "How To" video on YouTube posted by Overclock3d, which you should check out. This is an "e" rather than an "e" (yes, it is an "e" rather than a "3"). In spite of the tense situation, the gentlemen clearly demonstrated how to do the installation, including how to properly align the Bartact label. Additionally, I've used his How To videos on a variety of other products as well. I've been impressed with my Bartact Fire Extinguisher so far and will probably research and possibly purchase other products from this quality supplier in the future.
The bartact seat covers gave me confidence after buying a pair of fire extinguishers. I've been looking for a secure, easy to hang mounting solution for a couple extinguishers. As far as I can tell, these kidde fire extinguishers would not In order to increase the number of brands that can fit the mount, Bartact slightly flexed it. That being said, it holds its shape well. Extinguishers are heavy, so removing them requires a lot of force, possibly even the removal of the mount, which is very simple. That way, the charger won't eject when an accident occurs or when it gets off the In order to eject the item and injure passengers, there would need to be a serious impact. It was not possible to ignore it, so I faced it downwards. The Jeep owners who own this product will wish they had it before. The rock crawler in you to the soccer mom in you. The product for 50 bucks might be able to save your investment or that of A few days ago I saw a car pull into a gas station smoking from the hood with a friend as I was at the gas station. There is a lot The male driver, his girlfriend and a small child in a car seat were riding along in a car that had by now caught a small electrical fire. Our buddy ran over with his fire extinguisher to put out the small fire. It took the fire department five minutes to arrive. There is no end to the scenarios, and the insurance is inexpensive.
This is a 5-pound (although it actually weighs 6 pounds) fire extinguisher for our four-wheel drive. Then attached it to the upright rollbar by wrapping it in this. I went up a very rocky trail up a mountain this morning, and did some things I would never do in my life Getting into shape. No matter how hard I pressed, this 6 pound fire extinguisher would not move. This has been a great experience for us. In the case of deployment, all you have to do is worry about two velcro straps. As long as your unit is in place, the sleeve will stay. Our vehicle has been blessed with one of the smartest purchases we've ever made. Designed for a tight fit, the straps around your roll bar are sturdy, and you can tell from their workmanship that these holders are made with quality.
I've been using it for a few months now on a RZR Have had it on for 3 days while hiking in very harsh terrain. Has not moved The auto/marine 10-foot rod I used was a Kidde It fits perfectly in the C extinguisher. A 14-inch extinguisher has a diameter of 14 inches. The tallest person is 3" and the shortest is 3". This is a 25-inch width.
I was a little confused after reading most all reviews. . . what it fit with and didn't fit with, how it mounts, and will it slip, etc. so let's clear that up Honestly, I'm in love with it. In an envelope that was padded, the package arrived quickly. My Kidde 110 2 is compatible with this shirt. A small loop at the top synced perfectly around Kidde's dial, creating a nice sock fit of 5lbs. This smartly designed jacket is well made and carefully crafted. It is made out of neoprene My "21 Wrangler JLU unpadded sport bar stops sliding perfectly when the 'like bands' running along the length of each side are properly installed, adhering to it and gripping it tightly. Installation takes just five minutes by running the two provided straps through the hoop in the sewing to further reduce slipping, securing everything into place and then stretching everything down snugly. The fact that it's well made, affordable, unobtrusive (black), and mounts out of the way makes it a no-brainer for anyone who owns a Jeep JLU. I'm glad you were able to make it over to the US to see me.
My side by side ATV Honda Pioneer 500 is equipped with this unit. Perfectly made and makes a good fit for the extinguisher. My only concern was whether the Velcro straps would stay fastened during rough riding, but I have had this bag for about 3 or 4 months of riding in rough terrain, including getting airborne once or twice, and it has never been unfastened. Compared to what I expected, it's much better.