Replacement Hose kit for Moen Pulldown Style Kitchen Faucets, Fits in Moen #150259, with the hose part number #187108

There was no way to put it on! There is no way that this replacement hose will fit my Moen faucet Let the water flow down the When I tried the snap-in, it worked fine, but once I snapped it in, the price went up Use the female end of the new hose to connect to the in' connection. This connection never made a solid snap sound, and water leaked like crazy from it. The old O-I popped up but I couldn't use it A hose ring that came out of the bad one. . . There is no difference between the two. From reading other reviews, it appears they are correct. . . the male end is approximately one or two millimeters too thick, that's the reason it doesn't As a result, I called Moen as others had advised. A Moen hose was on its way to me in less than ten minutes after I called customer service. I attached a picture demonstrating how it works, it has a plastic end instead of a metal one. The bag was perfect, and there were Don't spend time and money on imitation parts. Get the original MOEN parts instead. Here is a picture that you can see.

Liv Robbins

| Jul 20, 2021

Compared to the old hose (the hose pictured on top), the weave of the new hose is tighter. I also liked the fact that it was longer, although you need about 3 to 4 inches of room past how the old hose hangs on this. There seems to be no compromise here with a brass quick connect just like the original, and the same sprayer end that articulates. Since my local Big Box only had "universal" hoses (consider yourself warned! I would also like to add that the hose on my almost $300 unit is very high quality. After only four years of use, the facet on a 00 Moen bathroom sink splits at the ferule. Would have been more appropriate to keep the event longer.

Kensley Sexton

| Jun 17, 2021

The old hose connector failed just before Thanksgiving, and it caused me some serious holiday preparation problems with the spilled water. I didn't inspect the differences between this and the factory part very closely, because the old one failed just before Thanksgiving. Getting ready to replace the whole faucet (Moen Banbury 87017W) the thought crossed my mind, "Hmm. Is it possible to get this any faster than Moen can get it to me during the ' Sure enough, something like this happens We can rely on Amazon to save the day. There was a good "schpiel" regarding the quality and warranty of this seller, and it was a low-priced product for a reasonable cost The mid-20th century I installed it in a snap, and life has been good since. It got here Saturday morning, and everything is back to normal. When I got this faucet, it was about 5 or 6 years old, so if I can get another 5-year old, I would be glad If I can get a two-year subscription for less than 15 bucks, I'll be very happy. Now that we are back to normal, it's time to cook some lunch without the major headaches we've had Things may go haywire more quickly than I anticipated. I'll let you know if that happens.

Otto Roach

| Oct 29, 2020

We sell this replacement hose for our Moen "Annabelle" pull-down faucet This kitchen faucet is noticeably lighter than others in the market, but so far, it appears to be working well (I In the photo, you can see that there are only three strands weaving together There are two layers on this replacement hose, as opposed to four-ply There are more layers of material in this hose than the original Moen hose, and it feels more lightweight. While the coupling at the end looks similar, the O-ring and coupling at the end are different The ring of the new hose is smaller than that of My old 0 was swapped for a new 0 Put the new hose on top of the ring. My assumption is that for a time it will perform well, but I do not think that it will last as long as the original.

Arya Curtis

| Sep 14, 2020

I called Moen warranty support about replacing a hose that leaked at the crimp (an obvious defect on the manufacturer's behalf). My understanding is that there are only two types of hoses available for Moen faucets, pull down and pull down. Customer service was very friendly and sent out the part immediately. Unfortunately, Moen is not familiar with their own products and sent out the wrong part. The pull-out hose for Moen may be replaced by this OEM replacement. seller has provided an accurate description, quick shipping, and a hose that looks like original equipment. The only thing I wish I had done earlier was purchase the product rather than waste time with Moen's warranty service. Or, even better yet, avoid all purchases from Moen altogether.

Pierce Wallace

| Dec 04, 2020

A video can be seen online of a handyman taking out an old hose without much hassle. That is not true. At least in my case, removing the old hose was a physical process requiring cutting. As it turns out, putting the new one in is quite easy. All you have to do is slip it in and wiggle a bit. It is not possible to remove the quick-release brackets in the same way unless you align the quick-release brackets vertically You should connect the nozzle end to the hole through the counter and go back up through there. There is almost no way to do this. You don't have to worry about anything. The box-shaped object was used for these purposes To remove my old hose, I had to cut it off at the output end with a cutter.

Julie MARSDEN

| Feb 14, 2021

I was able to install the product very easily- Keep the top end from falling into the faucet by making sure it stays up. As a last resort, I used a channel lock when I had no other tool available. I added another to my cart to keep for next time. I will attach it to the wall beneath the sink with screws. * *
**I added another to my cart to keep for next time.

Kelsey Atkins

| Mar 04, 2021

However, it is easy to install. There was a leak in my original faucet. It took me multiple trips to Home Depot to find a replacement, but I never found one. After much searching, I decided to purchase this hose on Amazon. There was a better loom on it than the original one. There was a leak in our faucet because it was five It would seem that the plastic hose that is under the loom split, resulting in the There was little stress involved in the installation. As far as I can tell, there is an O A hose needs to be purchased with this ring. I discovered that my Moen faucet is covered by a lifetime warranty, but I am not eligible for free replacement parts. After waiting nearly a week and a half, I finally got my order. The fact that I was able to get my kitchen faucet running again within a day was invaluable. Although the hose did seem overpriced to me, I agree that it was too expensive. The price was about $10 according to what I expected. That is why I deduct a star from its rating.

Aila Lee

| Jun 18, 2021