Makita 4329K Top Handle Jig Saw
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
We don't have any 220 volt jigsaws in stock.
If you buy a step down converter that can support the required current draw, it should work. br>When purchasing shavers and other similar items, the voltage is usually 110v. 120v/220- In most cases, an adaptor is not required when using 240v. If you're not sure, check the plug. If you're using low-power devices and only have 110v/120v support, get a cheapo adaptor. However, if you use a lot of power, you'll need a good power converter; otherwise, your converter will burn out and your appliance will stop working.
I'm not sure, but I'll say this because I try to buy American-made products whenever possible. I've owned a lot of circular and sabre saws in my life and have never found one that has held up until I discovered the Makita circular saw a few years ago. It has gained my respect because it is built to last and is extremely dependable. That is why, in order to finish my new deck, I purchased a Makita variable sabre saw. It's now my go-to sabre saw because it worked so well. The only thing they could improve on is if it had a worklight, but in daylight it works just fine without one.
Yes and no, depending on the cutting angle and length of the cut. For most cuts, such as a circular cut, the answer is yes. Most cuts can usually be seen with this saw if you position your head correctly. As time goes on, you'll pick up new skills.
Selected User Reviews For Makita 4329K Top Handle Jig Saw
This is the first Makita power tool with which I am dissatisfied. I've bought a lot of Makita tools in the last year, including a circular saw, drills, impact drivers, angle grinders, reciprocating saws, chainsaws, and probably a few more that I'm forgetting right now. Let's start with the positive. The counterweight system does a fantastic job of reducing vibrations. The lock-on feature and the variable speed It's fantastic. I used it the other day to cut some sheet metal, and being able to set the speed to just under half-speed saved me a lot of blade wear. Now for the bad news. br>br> The shoe is mediocre at best; it's rigid and flat, but getting it lined up perfectly before tightening the set screw is difficult. I haven't figured out how to line it up yet. This model appealed to me because it claimed to have a 'positive stop' to aid in getting the shoe tightened down to 90 degrees. Such a feature does not exist. When the lock nut on the base/shoe is loosened, the base/shoe moves freely, just like the other 20-dollar junk jigsaws. br>br>And now for the truly awful. The blades aren't lined up properly. It does have a roller bearing, but it moves about 1/8" back and forth during operation, defeating the purpose of keeping the blade straight in the bearing. You can line up a blade in the slot with your finger, but once the set screw touches it, it moves out of alignment by several degrees. I'm not sure if I'll be able to modify the tool in any way to make this work, or if this is something I'll have to live with. br>br>I'm shocked by all of this because I've always adored Makita products.
It works well with softer and thinner woods, but it struggles with some of the harder finish woods. While the jig saw is simple to use and manipulate while cutting, you'll need a more powerful saw to cut through some thicker hard woods. For the price, I'd recommend it as long as you understand the limitations.
Because of its lighter weight, this jig saw is simple to use. It cuts a line as straight as a good jigsaw. True, cutting an absolutely straight line with any jig saw is nearly impossible, but this saw does a good job and eliminates the need for finishing. I put a black mark in the center of the safety wire to help sight the line. br>br>Even though this saw doesn't have an easy snap-on blade, it's still a good tool. Because I don't change blades very often, I don't have any issues with the blade changing mechanism. Furthermore, loosening the blade-holding bolt, inserting the blade, and tightening the bolt again takes only seconds. br>br>All I want is for the dust port to work. I'm unable to locate any kind of adapter. br>br>With practice and the right blade, I was able to cut a circular line, but finishing off afterward is still required. br>br>The cuts are very clean. For my woodworking projects, the saw is powerful enough. br>I use my circular saw for straight cuts on very thick hard wood. br>br>This saw is better than the Porter Cable I first bought and returned because it veered too much off a straight line. I could have made a mistake. The case is extremely useful. br>br> The case has a pungent odor when it is brand new. I got rid of it by leaving the case open in the hot sun for a few hours and then running a fan over it for a few hours; the odor that lingered no longer bothers me.
Yes, Virginia, you can cut a straight line. I do a lot of DIY projects and use a jigsaw frequently. I'd come to the sad realization that I'd never be able to cut a straight line and would always have to compensate for going off course in the final few inches. When I first got this saw, I discovered that I could cut a straight line, whereas with my previous saw (a highly rated but less expensive one), the blade bent slightly as I approached the end of the cut, causing the cut to curve. The Makita saw is not pushed off course by the same amount of pressure. This saw has a special place in my heart. It has a variable speed control that ranges from full throttle to a stroke speed comparable to that of a fast handsaw. The blade fits snugly into the housing, making it impossible to make a mistake. It does require a tool to change the blades, but the tool is located on the saw's back. The dust housing is made of clear plastic and works great. Because you can't see the saw blade when the housing is down, I had to change my technique. I was able to learn to use the guide mark instead of watching the blade because it is very visible. It's packaged in a very sturdy case. It can fit into tight spaces and stand up on its own. I'm overjoyed, though my sander is a little sad because it isn't always in use smoothing out the last few inches of bad cut.
This is a solid piece of equipment. In the past, I've used a couple of other "budget friendly" jigsaws that felt like they were going to vibrate themselves to death or break the saw blade off before cutting through your workpiece. Neither of those sentiments can be applied to this situation. br>br>All the beans are in this thing. br>br>I also like the small hex key holder built into the back of the saw, which comes in handy when changing blades quickly.
The machine is well-made and professional in appearance. I have a few more JigSaws from Craftsman and Black & Decker. Decker. Nothing beats a high-quality piece of equipment like this. With ease, it can be used for the most intricate and specifically circular cuts. For the best performance, get the best blade you can afford, and then get a backup just in case!.
blades with a shank To be precise, no. Smooth, well-balanced jigsaw with excellent value for money. However, despite the fact that T-shirts can be used, It simply grips the blade with set screw pressure, as it does with shank blades. It's not designed to hold a T-shirt in place very securely. blade with a shank, as required by the design I'm going to contact a factory to see if I can get a "dedicated" T-shirt swapped out or purchased. chuck on the shank So far, so good.
Related Products For Makita 4329K Top Handle Jig Saw
