BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The JS572EBK is made in Switzerland, and if you have any additional questions, please contact one of our Bosch Product Specialists at 1-877-Bosch. 877- BOSCH- 99 (1- 877- 267- 2499).
My third Bosch is on the way. Not because they died, but because I upgraded and the improvements made it worthwhile to do so.br>br>Back in the day, I went through a jig saw every six months or so. My jig saw served as a bandsaw, as well as a handsaw, and... I was fed up with flimsy jigsaws that didn't last and decided to spend the extra cash on something better. D claimed that the saw was a commercial model, complete with ball bearings. It died just like the others, and when I disassembled it, I discovered that the bearing was a bronze ball with a hole drilled through it. br>br>Despite my apprehensions about spending more money only to be duped again, I spent a lot of money on a Bosch. That was more than four decades ago. I gave that saw to my brother seven years ago, and he still has it and uses it. br>br>The first thing I noticed about the Bosch and the, at the time, new fangled blade system was that they didn't break when you thought about using them, or even when you did use them, with the exception of cutting metal and iron. br>br>The second thing I noticed was that I could cut a 2x4 almost as quickly as a cheap skill saw with a cheap blade using maximum orbit. br>br>The third thing I noticed was that I got no light when I used an engineers square on the cuts made on those 2x4's. Though, to be fair, simply pushing from the side can alter the quality of such cuts, the saw solved the majority of such issues, and cutting methods made those solutions workable. br>br>After a few years, it became clear that the Bosch's quality was far superior to that of Skill, B, and C. D, as well as others br>br>I'm on my third one now, and I'm really enjoying it. I can replace blades or adjust the angle with only the built-in levers in the free version. br>br>I've considered the Festools, which are based on Bosch's design, but the cost of around $550 puts me off. 00 pushed the "hurts once [buying it]" button a little too far. The Carvex, on the other hand, appears to be a high-quality do-it-yourself project. I like that the plate can turn 90 degrees and ride along the side of a board for angle cuts.br>br>However, the Carvex's price and the need to switch between plates for angles forces me to return to the Festool Trion, which is not tool-less. less, and I'm not sure there's enough of a difference to justify the extra $90. What is the difference of 00? Because I've never owned a Trion, I can't say whether or not most of the claims are simply a Ford/Chevy issue. In keeping with that theme, I purchased two Festool sanders. I have a finisher and a much more expensive Rotex (I have about twelve sanders in total, not counting three floor model creatures). I like them a lot, but I'm curious how the Bosch equivalent (variable speed/direct drive (angle grinder mode) with random orbit compares to my Rotex 5"? My old Porter Cable random orbit sander, for example- With the right vac attachment and paper, a polisher could join the fray in part. Please inform us.br>br>
Thank you for reaching out to us with your query. The JS572EBK would be ideal for your application because it is simple to operate and handle, allowing for precise control and cuts. If you have any additional questions, please contact our Bosch Customer Service Representatives at 1-888-Bosch. 877- BOSCH- 99 (1- 877- 267- 2499)
"Hello there!" The cutting capacity of the JS572EBK Jigsaw is: br>Capacity for Cutting- 5 * Soft Wood br>Cutting Capacity- 1/2"" * Aluminum 0 Cutting Capacity: 875 br> * Mild Steel * 375br>For more information, please call 1-. 877- 1 - BOSCH99 877- 267- 2499) from Monday to Friday Fri 7A- 7P CST.
Selected User Reviews For BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK
Despite the fact that this saw "might" still have the best reviews on the market, Bosch has unfortunately gone the way of the dodo and cut corners on many of its features and accessories. Prospective buyers should be aware that the saw is no longer manufactured in Switzerland, as many commenters and answers have pointed out. They are now manufactured in Hungary, which should still outperform many other offshore products, but is, in my opinion, a step backwards. They also don't include the vacuum attachment, an upgraded case, or a metal foot plate. Right out of the box, I noticed some clamshell fitment issues as well as some mold blemishes. The tool does not have the appearance or feel of a comparable pro tool for the money. Overall, I'm very dissatisfied with the fit and finish of this saw. In terms of how it performs and holds up, only time will tell whether the manufacturing flaws and supplied accessories have a significant impact on usability and performance. I'm keeping it because I believe it's the "best" available, but if I'd known Bosch had nerfed the saw so severely, I might have saved the money and gone with another brand or the 7 amp model. I'll update my review if it turns out to be as good as the hype suggests. For the time being, however, first impressions have me wishing I had more money.
While some tools offer additional features such as laser guides and other tools, this one will do everything you need and more. A wheel blade guide system is built into my old Bosch model to keep the blade vertical. I'm glad they kept the design but improved it. It's also worth mentioning the blade quick change that doesn't require any tools. The old blade pops out when you pull a lever to the side. Hold the lever to the side, insert the new blade, and release the lever, and you're done! The LED light, which can be turned on and off, is strategically placed and effectively illuminates the blade. Adjusting the bevel cut plate is simple and effective, with solid 45° stops. It comes with a long power cord for easy access, as well as a carrying case. Just keep in mind that a case will only help to extend the life and condition of a tool if it is used! (I have some remorse in that department from the past,)! On one of my recent projects, I used this tool to cut the 2x and 3/4" plywood barrel ceiling arches shown in the photo. The saw vibrated very little, the cuts were smooth, and the cuts were square and true. Overall, it's a fantastic value for money tool.
The fact that it's a barrel style jigsaw means I have to hold it differently than a top handle jigsaw is one of my favorite features. It may appear insignificant, but it lowers my elbow while I'm cutting and allows me to be closer to the work, allowing me to ensure that I'm cutting precisely where I want. br>br>It's also important to me that the model I bought was made in Hungary rather than China. br>br>So far, I've used it about ten times. It's done a fantastic job. Always remember to let the tool do the heavy lifting and not to force the cut - Bosch makes excellent tools, so everything will be perfect.
Two top-of-the-line jigsaws are available from Bosch. Although I prefer the barrel style reviewed here, that is a personal preference. The D handle distinguishes the other top-line Bosch, so it's all about how they're held. Bosch has put a lot of thought into how the blade is kept true, and the results are outstanding. We have some Festool tools, so I'm not making a pointless comparison between the two brands here. If you want a top-of-the-line performance jigsaw, buy this Bosch and save your money (a significant amount of money) for other tools. In this case, the festool simply does not make a compelling case.
I used to use a trigger D handle jigsaw, but I bought this because it was less expensive and smaller and lighter than the D handle. I'm a 65-year-old woman with small hands, so the barrel isn't as easy to maneuver as I'd like, and the switch instead of a trigger is a turn-off for me. The little plastic guard that is supposed to keep the wood from splintering or something is junk, but it works fine otherwise. The first time I tried to use it, it popped off and flew across the room, so I'm not bothering. I don't use this tool very often, but when I do, I expect it to be dependable and complete the task in the timeframe I specify, which it does. All I have to do now is adjust to the new look.
I borrowed a previous version of this tool to do some repairs and was so impressed that I decided to purchase it, replacing a 35-year-old Black and Decker that still works - However, using it is difficult. br>br>The barrel grip is extremely comfortable, and the tool-free operation is a real plus. It's also nice if you don't have to change blades as often. I particularly like the LED lights and blade support, which make cutting on a line far more precise. On 1 1/2 inch 2x8s, there was no blade deflection. br>br>My only suggestion for improvement is to have the LEDs turn on when the tool is turned on. When cutting, it's unnecessary to remove them. The second switch could be used to turn them on even if the tool is turned off, allowing for precise positioning before the motor starts. Recommend. br>br>.
It does not appear to be as heavy as my old 1587AVS, but that could be due to hand position. Unlike most "competitor" jigsaws, it performs admirably without becoming sloppy due to its own vibrations. br>The ability to change blades quickly is a useful feature. Less modification is desirable. br>br>The ONLY complaint I have about this unit is that it gets very hot. When I say hot, I mean it will burn the hell out of your hand, so keep repositioning as you use it or you will become irritated as well. (This will not prevent me from using it or prompt a return, but it is an issue that needs to be addressed in the future. )br>br>Overall, it is a fantastic unit that does exactly what it is supposed to do, and does so very accurately. br>I would strongly advise it.
Related Products For BOSCH 7.2 Amp Barrel-Grip Jig Saw Kit JS572EBK
