Bosch 1617EVSPK Wood Router Tool Combo Kit with Bosch RBS006 1/4-Inch Shank Carbide-Tipped Multi-Purpose Router Bit Set, 6-Piece
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is true. micrometer adjustment on the fixed base is a vernier type adjustment knob that lets you adjust the range of the micrometer in 1/64" increments. Mounted under router tables, the adjustment knob can be accessed through a hole in the table and turned with a wrench (available for purchase) through an allen wrench screw. There is a high probability that your table will not have the hole already in it There will be a hole drilled in the panel, but you will need to drill it yourself. In my opinion, I haven't used the above table adjustment, since I like the ability to easily see the depth markings on the dial when I adjust the height. As I mount my router onto the table with its base, I always place the adjustment dial toward the front so that I can see the adjustment as I make it. Earlier in this post, your question was answered by a comment stating that a router used in a table should have at least 3 HP. The reason I disagree with this is unless you are doing professional work and you are using the router constantly. I have consistently gotten stellar results when I use this router at speeds lower than the maximum speed recommended for the rail and stile bit sets You may not want to remove the whole depth of a hard wood like oak on the first pass if you will be cutting into it. In my experience, multiple cuts through the depth of the cut and a final cut of no more than 10 percent of it are most effective It took 15 percent of the total material to remove it. As you take a small cut as your last cut, your bit chatter and hang ups will be minimized You want your results to be smooth and consistent, both in terms of breakout and breakouts.
The table I'm using now is the RA1171 and it does work well. To mount it under the table, you'll use the rigid base.
Template guides (bad stuff)) and no RA1100 adapter (needed for the RA1126 adapter) to allow Porter Cable or other threaded templates to be used with this router, nor did it come with a subbase centering pin and cone configured for this router. In light of that, I would not have purchased this brand if I had known I would need an adapter for an adapter. A mea culpa is in order.
After doing some research, I read some reviews of the Bosch routers, and they came out to be the most highly recommended. Besides being top pick in Popular Mechanics, my Dad worked as a carpenter for many years, and he has used Bosch, Dewalt, and other brands of routers, and power tools before, and he always raved A separate model that *br>he bought 25+ years ago burned up beyond the possibility of repair last year, and I bought this one to replace it. He says it's beautiful! I do the same.
Selected User Reviews For Bosch 1617EVSPK Wood Router Tool Combo Kit with Bosch RBS006 1/4-Inch Shank Carbide-Tipped Multi-Purpose Router Bit Set, 6-Piece
There is only one problem. While I am used to buying Dewalt power tools, I was impressed with the Bosch router that I borrowed from a friend for a recent project. The combo kit comes in an attractive plastic case and functions just In my opinion, the only reason I took off one star is that, like others have noted, only a 1/2 inch collet is included, even though the description on Amazon (and the box the kit came in) stated both a 1/2 inch and 1/4 inch collet. Upon receiving my router, I found all the tools and accessories still wrapped in plastic, and my router is in the same condition as when it arrived, In some cases, Bosch 1/4 inch collets can be purchased for as little as $15 and I have a spare from an older model that will work fine, but Bosch and Amazon should really get their acts together and make sure what is advertised is truly available.
There is no way I would ever read those instructions. Although it states on its TITLE that 1/4 inch and 1/2 inch collets are included, this is simply not true. At the time of arrival, the 1/2 inch collet was already installed, but the 1/4 inch collet had not been Due to this, I can no longer use the router bit set I purchased. The only thing that is more stressful than this product is the thought of having to do it again I will box it up, return it, and start all over again. As a result, I would like Bosch to send the missing collet as soon as possible. Additionally, there were very few indications that this was a quality product, considering its price.
Moreover, the edges of the metal router still had burrs and were deeply sharp, which left me with cuts twice during the first day. seems as if little finishing was done to this router before it was sent to the customer. For over a decade I've used DeWalt and Craftsman products without encountering this kind of problem. This is a real shame.
I liked this router a lot. When it got too hot and seized up, it overheated. When using a 1 1/2" surface planing bit with less than half the diameter of the bit and a depth of 1/16" on each pass on green white oak, the router performed as if it was The router operated one handed very smoothly, and it never felt laborious. This happened for a few seconds, but then The time I've spent using this tool is less than two hours. This has disappointed me greatly. Would you be able to help? Dear Amazon, what can you do? As soon as I have this issue resolved, I'll be changing my review of what seems to be a I couldn't imagine how frustrating this could have been. Thanks I noticed your reply to my review after contacting Amazon Customer Service. I had been expecting a reply to my review after contacting Amazon Customer service. Once I figured out that I needed to check every day to see if I got a reply, that took me some time to locate The interface is tricky to figure out at first, but it's not too hard once you get the hang of it. I want to make someone aware of something You can save a copy of your review as a pdf without printing and wasting paper by selecting "print" then "save as pdf". By doing so, you won't need to scroll through countless reviews you'll be able to search by your review title or user name instead. Please share this with others if you find it useful. It is still too soon to tell if I will need the new router that I purchased at a $10 premium since I currently do not have any projects.
The positive reviews made me want to buy It's easy to see why Bosch tools are so good because we hear this over and over It's a purchase I regret ever since I got it. The following items, in no particular order, need to be addressed 1) Collets don't always provide a positive grip on (It is a terrible feeling when your bit moves in a collet and ruins the As far as insertion goes, I know how to do it My arms are so tired. (I can't count how many times I've had to tighten these awful This is terrible. A) It is difficult to insert or remove the motor. B) The motor does not slide easily into or out of the Reviews are mostly negative (see I think there is a problem with the router in question. Five) Lack of attachments -- It's the add-ons that kill you with Bosch A dust collector must be bought separately, as well as an edge guide (which is cheaply made and expensive) and bushings (it's no surprise that this is so, because the bushing adapter must be purchased separately as well). It is likely that you will need to pay significantly more than the list price if you require any degree of flexibility *6) I don't like the way the plunge router feels. Plunging the plunger is very difficult - you really need to lean forward A safety or precision issue could arise as a result of this. This tool is not without its issues, however, and I am a little hesitant to recommend it. It will likely replace the motor in my router table with something else, and I will probably just leave it there permanently.
My needs are definitely beyond those of a hobby woodworker like me. It's easy and quick to adjust on both bases, so I enjoy my shop time. The laptop has been with me for a year now, and I haven't encountered any issues. The product was excellent and I would definitely purchase it EDIT
Despite being a little over a year into using it, I still find myself looking for ways to use it since I enjoy using it so much.
Related Products For Bosch 1617EVSPK Wood Router Tool Combo Kit with Bosch RBS006 1/4-Inch Shank Carbide-Tipped Multi-Purpose Router Bit Set, 6-Piece
