Makita 2012NB 12" Portable Planer

The advantages and disadvantages of 2012nb are listed below. br>br>Benefits: br>br> The amount of noise is minimal. When planing, the Apple Watch registered 90 decibels at a distance of 12 inches from the machine. br>br>Snipe is minimal, but not completely absent. br>br>While the construction quality is excellent, the side panels are made of plastic. Lightweight. br>br> br>br>Contrary to popular belief, there are a number of disadvantages to using this product. sweeping up the dust The optional dust port is 3 inches in diameter, which is nonstandard. br>br>The finish is not as smooth as I would like. When planing maple, it appears that there is a lot of tear out. br>br>It is necessary to improve packaging. Insufficient defense - There will be no styrofoam used in this project. br>br>The Makita 2012nb is a good machine, but I expected more for the money I paid.

Skye McGrath

| Apr 15, 2021

Other brands should be avoided. My brother went through two different brands before deciding on this one. I bought this one for him, and he wears it all the time; he can't seem to get enough of it. Exceptional quality. I'm not a big fan of fine furniture. It's what I use to make sure that everything is in order. plane rough-cut cedar for art cradle boards and frames. br>br>Update: My brother painted about 100 old house boards with (probably lead) paint on both sides several times. It stood the test of time. I had to flip the blades (they're two-sided) by the end. This planer continues to delight me. (If you're curious, a new set of blades costs around $40. ) However, they are more likely to last on newer wood rather than old painted boards.

Matteo Jacobs

| Dec 14, 2021

I've never seen or used a better portable planer than this one. It's also the quietest, makes precise cuts, and has a great stop screw for repeatable planing. It's pricey for a portable planer, but it was well worth it for me to have something quieter. I haven't measured the decibel level to see if it's really 83 db, but I've heard other planers and this one is the quietest. br>br>I'd buy it again in a heartbeat.

Magnus Kennedy

| Aug 03, 2021

There are a lot of cast aluminum parts on this thing. I'm going to leave this as a first impression, with the hope of expanding it as I use it. Initial impressions are that this is a very well-built unit that will suit my needs perfectly. br>br>I noticed that there aren't many photos of this product online, so I decided to add a bunch right away. It might be of assistance to some people. br>br>September 26th, 2016 - This review has been put on hold because I've been too preoccupied with planning. The planer is fantastic; it can easily roll two 2x6 pine boards side by side. I've got about 1000 feet of boards planned so far, with Pine, Oak, Poplar, Walnut, and Hard Maple being the most common. They have a nice finish, and I'm not sure why I put off buying a planer for so long. I know it's probably bad for the blades, but it cleans up excess glue like a champ.

Sydney Barnett

| Dec 07, 2021

It turned out to be everything I hoped for. The first was lost in shipping and had to be replaced. I ordered another, which was also damaged in transit (my delivery guys throw things and smash boxes to make them fit), but not as badly as the first. Replacement parts were available at very reasonable prices, about three times less than Dewalt parts. I contacted Amazon and received a partial refund for the damaged items. So much quieter, less dust, and fluffier curlier animal beding quality shavings than the three-blade Dewalt. Only two hand screws are required to access the blade bolts, compared to six or seven on the Dewalt; it takes up less space and is light enough to move without feeling like I'm going to hurt myself. The ever-present snipe; not much, but it beats the dewalt's socks off on thin pieces because the rollers are closer together and the blades don't seem to pull up on the wood.

Everest Reese

| Oct 02, 2021

Below is a follow-up to an earlier review. It still works like new, has a long blade life, and is simple to use and adjust; however, I do not use it for commercial purposes. I'm just a homebody who likes to do things around the house. However, there were no issues. Perhaps insert cutters, rather than knives, would be a better option. However, the cost is prohibitively high for my needs. There were no issues. br> I like that it's portable because I can't leave my setup in one place for long periods of time. br>br>I looked at this and the two DeWalts. ============================================================================================== I chose this one after reading negative reviews of the larger DeWalt and hearing about a friend's blade life and quality issues. I like that I can square up almost anything if I need to, even though it comes perfectly aligned out of the factory. I took out a blade to see how difficult it was. It's a well-thought-out system that's also simple to implement. I ran soft wood first, then Michigan Hard Maple, which I consider to be a true test. Padauk with a figured appearance. I figured out that the best way to avoid snipe is to keep square to the table and feed it in quickly at first by pushing. and slightly lift the last few inches as you exit the other end That way, I was able to almost completely eliminate snipe. For narrower boards, I've discovered that running at a slight angle feeds and eliminates snipe well. I like that you can cut boards as short as 5 1/8", and I did some testing with some short pieces. The optional ejection chute, which was mentioned in previous posts as being difficult to obtain, worked perfectly. They must have fixed it because I received the chute two days before the planer. The chute is an unusual size, but adaptors are available at Wood Smith shops, or you can do what I did and make your own. I used my metal lathe to turn an adaptor out of a piece of ABS plumbing pipe. To fill the small gap, you could simply wrap tape around it or use sticky back velcro. Although I only use it for small runs, I built mine to fit a large Rigid shop vac; if you run larger board feet, the vacuum will quickly fill up. For that, I simply let it fall to the ground and clean it up later. These things, on the other hand, produce a lot of material. Once it's fluffed up, it'll probably have three times the volume of the board. There's one more thing that's a definite plus. It's not as loud as the others I've heard; in fact, it's about the same volume as my power saw. There's no need to wear hearing protection at all. It has two blades and runs at one speed. There's no reason to use three blades in my opinion. The surface has a glass-like smoothness to it. And adding another blade would only increase the operating costs. It appears that the blade will last a long time. I've heard that the two-speed DeWalt is useless for anything wider than 6" on hard wood, according to DeWalt reviews. As a result, it's basically a single-speed machine. I would have given it five stars if I didn't have to wait to see how reliable it is in the long run. However, based on the reviews I've read, it appears to be in good shape. Finally, it's not too heavy. something that bothered me. The big DeWalt's 98 indicated that it would be a permanent tool, whereas the Makita is truly portable. I used a larger Stanley folding work vice/stand as a stand, which worked well and allowed me to store it easily. I mostly use it to plan hard woods for fine furniture and cabinets, as well as stock for scroll work.

Case Gregory

| Aug 06, 2021