SWAG V3.0 Portaband Table

What a wonderful story! I adore Now that I have my Miter gauge from Incra, I can make cuts so accurately that I hardly need filler rod when I weld the seams! There's a lot of quality in this piece It makes the portable bandsaw even better by providing a well-built, very functional table. I don't know why you need a big bandsaw when this will do? As soon as I opened the packaging, I was pleased to see everything organized and packaged in different sub-boxes and wrapped in bubble wrap, I assume to prevent scratching, but the hardware was in perfect condition. I found the table to be very simple It really should not be worth your money to buy this table if you can't figure it out, The foot pedal is an option I purchased for my table, and it The number of tables is zero. There's a Dewalt DWM 120 in the saw I have. As far as I know, I only have experience with this saw installation, but I'm confident the others will work It would be interesting to see a video of how one of these tables is I can't think of any better words to describe this sexy little table. Water jets or lasers are used to cut the pieces. CNC machines are used to make the cuts. This is a flawless pair of pants, and it is a nice touch to cut out the SWAG label on both legs. As you can see, it looks marvelous and I am very proud of and enjoy working on it. Seeing this, you'll think I mean business, so I've attached a couple of pictures. Furthermore, the corners are cut and bent together perfectly, so welding is not even necessary, since the bends look like they were created by a CNC machine. Each bend is extremely precise and flawless, so welding is not even necessary. It is impossible to make corner bends that have the same level of beauty as these, this table is absolutely gorgeous. It is also really cool that SWAG also includes a sticker, which I really like and it is always a nice surprise to receive one with a product. I have the V3 as discussed earlier. The number of tables is zero. I am not sure what all the changes are, but I know that the bandsaw is made in such a way that it can be easily taken out and used Even the SWAG base plate can be left on because it is larger than the factory plate, but I don't think it would cause a problem for most of the cuts I have done. In any case, if I need to put my OG baseplate back on, it's a simple job with two allen screws. Be sure to keep the original baseplate in case something goes wrong. I was a little disappointed that I didn't find a miter gauge easily to get. Initially, I didn't want to spend almost $80 on an Incra, so I went with a lesser brand. It was to arrive the next day, but I received an Amazon notification that its package had been damaged and it couldn't The Incra V27 gave me a refund, so I took that as a sign that I should stick with it. Therefore, I did that, but for a couple of weeks, I didn't have a miter fence at my disposal. While I'd like the table to come with a miter fence, I know that would add quite a bit of cost to it. An ad for the miter gauge would be an interesting addition to the recommendation sheet. SWAG users used different tools, so I had to do some research to see what they used. In sum, the Incra V27 is definitely the best choice. Although it is not cheap, it is very well built and will allow you to make very accurate miter cuts. There are so many things I love about the foot pedal. If you decide to go that route, I highly recommend it. I have found it works really well on the SWAG table, although you can use it on other power tools as well. My saw doesn't have a trigger lock so I'm not sure if this is an issue with the table or the saw itself. I probably should have used a clamp instead of the zip strip to lock the trigger. SWAG recommends a clamp, so it would have been a little safer. Although I'm not worried about it, I have pliers by my side that I can use to Rather than the clamp, you might be better off choosing the trigger clamp if you were worried about having to release the trigger quickly. It is the same as releasing the trigger when you release the foot switch. As you can see, I mounted my swag table to a track on the underside of my fabrication and welding I'm always looking for ways to save space since I don't have a lot of room. If I need to rotate the table to fit a particular angle, I can rotate the plate into the track. The table can be locked at any angle by tightening the plate against the track. What I like about the finished product is how well It's time to invest in a SWAG table if you own a portable bandsaw. My life would be so much easier if I didn't have this fabulous tool! All of us get stuff like this!.

Marlee MISTRY

| Nov 02, 2020

Once I got it set up, I was very happy with the table. My issue is that I use WEN 9436, and the directions say to remove the nut plate, cut in half, and put with the other half and the nut back on. Please re-read The plate needs to be secured with the screws. Unfortunately, the nut plate will not come out until the lower half of the motor chassis has been popped off, which I'm loathe to do on a brand new product. It is implied by the SWAG directions that it is a simple process. Once that's done, you're good to go. Attached are a few photos.

Faith Stanton

| Jun 08, 2021

It's the sharp edges that cause the problem. The blade on my kitchen knives is a lot sharper. EACH AND EVERY ONE I don't care what the customers think. They can go ahead and slash their fingers off on this A cost of $202 is quoted. Since the stinky customers don't have to pay taxes, they should say thank you for not cutting off their heads. Do the customers have retarded minds, are they not capable of chamfering their own edges?.

Annie Orr

| Mar 11, 2021

In the end, I am happy with it, but I don't like the mounting holes for the Dewalt tool. A result is that the blade runs slightly at an I also find the plate is not as tightly fitting in the stand as I had anticipated. have to do a lot of adjustments, which are all held by just one It would be nice to see this improved. I was surprised when it started working as expected after I got it up and running. If the feet are turned inward, then it would fit a 10" base. The feet in the picture are backwards, or mine have the SWAG logo on the wrong side. Other than the bolts on my 10" stand, there is no clearance for them. To do this, I turned the feet outwards (as in the picture from the listing) and added an angle to it. This extension is made of iron. I just picked up a switched outlet and box for around $10 - after reading poor reviews of the optional switch A lock is not included in the DeWalt The switch must be tied down because it is on. With the cable, I was able to Fasten Velcro strip with a knot. Currently, the stand is equipped with a switch that turns the stand on and off.

Presley Middleton

| Oct 21, 2020

There is only a small (10 x 16 foot) hobby machine shop in which I can work, so there is a need for additional space. In the past, I have needed a metal-based product I have been thinking about cutting bands saw for some time, but hesitated due to the space it would require. SWAG V3 is the third version I have purchased. Together with a Dewalt portable band saw, the 0 Portaband Table is a great combination. There is a lot of room at the table- This heavy-duty product is made of Using lasers as gauges You can cut steel with a saw. Portable band saws from many manufacturers can be attached to this extension with ease, and it is designed for use with There is no need to mount the table to a workbench since it is small enough. As a result, it will mount on a It is the same style as the grinder stand In my hobby shop, where space is limited, I can swap out the band saw for either the grinder or belt sander that I also use on the grinder stand. It's a little inconvenient to swap out these machines, and would be counterproductive for a commercial shop.

Mekhi Morrison

| Jun 15, 2021

The guys who built their own stands out of bits and pieces that they had lying around made some really good videos. number of them, some are sheer geniuses and others don't have the appropriate talent. After I thought about how much time it was going to take to design the stand, acquire material, and fabricate it, I was In addition, to do a respectable job, I needed the saw on a stand already so I could fabricate the I bought the swag and it would have been delivered the next day, so I was unable to Stout is a good word to describe this. I could not believe how quickly it came together and was
Polystyrene boxes are pretty cheaply made, however everything that was included was in good condition. Overall, I am happy with the design and glad I bought it instead of building it myself.

Valentina KNOWLES

| Nov 24, 2020