T-track Hold Down Clamps,6-3/8"L x 1-1/4"Width-Woodworking and Clamps - High Strength Aluminum Alloy 6063 - Fine Sandblast Anodized - Blue Color- 2 Pack
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You'll be able to locate 1/4- A hardware store will have 20 bolts and nuts. If you're looking for a quarter-inch thick piece of wood, this is the place to 20 t- Bolts and nuts can usually be found in a hardware store's specialized section or on Amazon.
If you want a snug fit, go with a 3/4 size. If you use a straight edge and use 3/4 bite tape on one side of the guide, the result will be a loose fit. Try it.
Please double-check your existing T slot size by using the size information provided below.br>T- Bolt: 3- 5/16" L x 1/2" L x 1/2" L x 1/2" L x 1/2" L Thread Base: 18br> 25/32" long, 33/64" wide, and 11/128" thick.
If you have a set of Kreg clamps in your hands, double-check their size to see if they will fit in our T Track. For your convenience, we've included a full-size image of our track for you to examine. Thanks!
Selected User Reviews For T-track Hold Down Clamps,6-3/8"L x 1-1/4"Width-Woodworking and Clamps - High Strength Aluminum Alloy 6063 - Fine Sandblast Anodized - Blue Color- 2 Pack
In a timely manner, the product was packaged and shipped. Bonus points for including seven mounting screws to save you a trip to the hardware store during installation. The only drawback is that the screws are 5/8" long, which is a little too long if you're installing the tracks on a 3/4" MDF or plywood base (3/8" t-slot). 5/8" screw + track depth) Nonetheless, kudos to HOTTARGET for an excellent job - I'd make a second order.
with a change These clamps are well-made and attractive, but they won't work with Kreg AccuCut traks right out of the box. The shoulder and threads of the bolt are too wide to fit into the Kreg track, which is much narrower. I shaved 1mm of metal from each side of the shoulder and the threads close to the head of the bolt with a Dremel and cutting wheel, and they now work perfectly. If you don't want to do that, the Kreg KMS7520 Track Clamps are about $25 on fleabay, though they don't come with Amazon's fast shipping.
I gave these five stars at first, but after comparing them to a Powertec intersection track, I changed my mind. There isn't a comparison to be made. These were purchased to go on the top of my workbench. I was under the impression that I had purchased the same track from various sources; however, I was mistaken. My assumptions were incorrect. Is it true that I still have them embedded in my table's surface? I did it, of course. I'm likely to purchase another product in the future. These tracks don't have a lustrous sheen to them; in fact, they're almost gritty. In the long run, I'm splitting hairs because they work with both ROCKLER and Powertec products, but the Powertec's finite cuts are surprising when compared to these. Also, these DO NOT MATCH ROCKLER or Powertec tracks in terms of aesthetics.
Colors that match are used by the people who sell name brands. br>This track appears to be of comparable quality, though I haven't yet tested all of my clamps and other accessories on it. When comparing this manufacturer's color to that of kreg or rockler, the name brands appear green, while these tracks appear purple with a hint of metal flake. br>If you don't mind that, I think these are fine, and they're a little less expensive than the others, screws included!.
I'm making a router table and fence, which will require a t-square. The tabletop has a track, and the fence has another. I had a few t-shirts on hand. I bought this track from Rockler. com several years ago, but the fence still needed to be completed. This track is fine and comes with mounting screws, but it is not as thick as the track I purchased from Rockler. Despite the fact that I had already routed a channel in the fence based on the dimensions of the old track, I was able to adapt it to fit this thinner track.
To begin with, the color blue does not match the color of powertec t track. This item appears to have a thicker, slightly textured surface coating. It almost appears to be painted rather than anodized. Second, the countersunk screw holes are not even, symmetrical, or smooth because they were hand drilled. The countersinks were clearly made without the use of a CNC, milling machine, or even a drill press. Third, the powertec t track features a line that runs straight down the center of the t slot's bottom. There is a line in the t slot on this product as well, but it is off to the side. br>As far as I can tell, the functional quality is identical to that of any other t track, and I would expect it to hold the same clamping pressures. The visual and manufacturing quality, on the other hand, are poor. I chose to send it back.
With the various equipment I use, these are ideal for my new reloading bench. When cutting the slots in your bench with the router, use extreme caution. I bought a 3/4 in because the diagram indicated that it should be 3/4 inch wide. I used a metal fence to guide my plunge router with a router bit. The cut slot, however, measured exactly what was required according to the diagram, but it was too narrow for their T slots. With a rubber mallet, I couldn't even get them in. I had to increase the slot width from 1/16 to 1/8 in order for them to fit. I had no issues with the screws, as some others had. I predrilled all of the holes before using a drill/driver to tighten them. They were affordable, so I would use them again.
There are no issues. Work on par with Rockler's. The only issue is that there is some burring around the drilled holes, making it difficult to slide a square nut. With T-, there are no issues. bolt, on the other hand. br>Will buy again because the price is almost half of Rockler's and I can deal with minor issues.
Related Products For T-track Hold Down Clamps,6-3/8"L x 1-1/4"Width-Woodworking and Clamps - High Strength Aluminum Alloy 6063 - Fine Sandblast Anodized - Blue Color- 2 Pack
