Kreg Foreman

I'm here as another professional to point out that this is a weekend-only event. I was so excited to get this tool because I drill around 300 pocket holes every few days. br>br>It's a woodworker toy, not a professional machine. br>br>I was so excited to get this tool because I drill around 300 pocket holes every few days. The machine claimed to make quick, consistent pocket holes, but it fell short. After about 100 holes, I noticed that the internal drill bit had gradually shifted back until the pocket hole was too shallow to work with. After adjusting the depth, I went back through and drilled them all again, making sure to tighten the screw that holds it in place (this was not a user error). Unfortunately, the problem persisted; the bit's depth drew back little by little each time, and the problem persisted even after tightening with a wrench as tightly as possible. br>br>$450 is a waste of money. In fact, it's completely useless. For precision, I'll continue to use the hand-held jig.

Briar Perkins

| May 31, 2021

This is a fantastic tool. It was purchased to aid in the construction of a cabinet set; On the first day, I drilled over 300 pocket holes. If you're going to make a lot of pocket holes, don't waste your time with the less expensive options! Make sure you have the Kreg pocket hole self-adjusting clamps and the flat paddle locking pliers on hand to keep everything in place while you assemble your project. Note that this tool requires the use of a vacuum cleaner; otherwise, the chips will clog the flutes of the bit, causing excessive heat and wear. It's also worth noting that the tool's vacuum output is only 1 psi. 1/4” - That tiny hole will almost certainly need to be converted to the diameter of your vacuum hose.

Colt Potts

| Aug 19, 2021

I wanted to wait 6 months before writing a review so I could get a real-world perspective on this machine. br>I work as a cabinet maker and use the Foreman on a daily basis. All of my face frames, as well as the odd panel, are pocket screwed. I don't use pocket screws throughout the cabinet, especially if it will be painted. br>I primarily use maple in my work. On rare occasions, alder and walnut are used. Having said that, the Kreg Foreman has exceeded my expectations. br>I had two issues, one of which has already been mentioned in other reviews: As the drill plunges, the material shifts slightly, leaving black marks on the wood from the rubber "foot. " Both issues were minor, but they were easily fixed by gluing a 150 grit sandpaper cutout to the rubber foot. br>Another thing that surprised me was how long the drill bit lasted, especially in comparison to my old K5 pocket screw system. After almost 6 months of use, I decided to replace the original bit. br>It comes highly recommended!.

Samuel Sanford

| Dec 03, 2021

I'm a huge Kreg fan already, so I had high hopes. I'm not a pro, but I do a lot of home improvement projects. For me, this was a significant investment, and I needed/wanted it to work. It was a success. Thank you, Kreg, for making such fantastic products. It simply works, and it does so on a regular basis. It's a lot faster than the Kreg Jig (though I still love my Kreg Jig), and it works for a lot of pocket holes. ) Changing the width of the wood is also simple and quick. All it takes is a simple fence movement and a twist to change the bit depth. I don't have a vacuum, so dust just collects in a neat pile beneath the table. It's also less taxing on my back because drilling a hole only takes seconds and requires no muscle. Thank you so much, Kreg!.

Ada Holden

| Feb 12, 2021

Although the pocket hole "machine" performs admirably, I object to the term "machine" being applied to something with a flimsy plastic base. My unit worked for a few days (probably 1000 holes) before the motor broke down. I'm getting a new one from Amazon, but I'm not thrilled with it. I still have a lot of holes to drill, so until the new one arrives, I'm using my old hand-cranked jig.

Felicity Witt

| Apr 07, 2021

Pocket holes are made quickly and easily with this tool. It's an excellent tool in general. Makes quick and easy pocket holes, which greatly increases my productivity and makes the process of drilling pockets much more bearable. Drilling pockets used to be a chore for me, especially when I had to do 50 or more, but now it's a breeze; I can complete 50 in under 10 minutes. The fact that it only has fence stops for 1 1/2, 3/4, and 1/2" material is my only real complaint. I wish it had 1" and 1 1/4" stops, but with some trial and error, you can figure it out.

Frida Estes

| Feb 27, 2021

Great for small and mediumbr>parts. It's made of plastic and aluminum and should be used with a soft touch or "Feel" if you want it to last. Dust extraction isn't necessary in most cases, but it's nice to have for a longer-term setup. br>I bought it for a specific project and now think it's too valuable to throw away. It has earned a place among the best tools in this list. br>Wishing everyone the best of luck.

Brynleigh Hatfield

| Nov 04, 2021

It had recently died, and IU needed to find a replacement as soon as possible. All I can say is that I wish it had died sooner because the Kreg Foreman is the most amazing tool I've used in a long time. It's a joy to use and has so many features that the PC model simply didn't have. It has a movable fence with stops, and what else? It's a one-handed task. Every time I need to pocket something (which happens frequently in my shop), I get so excited. My hat is off to Kreg, who I had always assumed was only for hobbyists. I'm overjoyed at the prospect of admitting I was mistaken.

Gracie Dickerson

| Jun 17, 2021