Neiko 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25-Piece Set | 1/8” to 7/8” by 1/32” Increment
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
China is where these are produced.
These are a pair of left-handed tapered cufflinks. spiral thread made by hand Starting at 1/8 inch, they're pushed into a drilled hole or into the inside of a pipe. They're graduated in size, so if the hole in the stuck piece is stripped, you can go to the next size; I recommend using them with a universal socket rather than a wrench because it allows the extractor to center itself better. This is a style that I've been using for over 40 years.
No, they haven't become hardened.
Selected User Reviews For Neiko 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25-Piece Set | 1/8” to 7/8” by 1/32” Increment
The two loose extractors that rolled around in the Amazon shipping box were the first thing I noticed when I opened it. The plastic case was broken at the hinges when I took the extractor set out of the Amazon shipping box and the cardboard slip cover.
2. The etching, on the other hand, was a problem. On some extractors, the etching is barely readable, and the quality and darkness are inconsistent. To make matters worse, the font size varies, with some having large etchings and others having small ones.
3. The case is the third point to consider. I drilled the tublar plastic and inserted a steel rod the entire length of the hinge because it had a broken tab when I received it, making it multiple times stronger than it was before. However, even with this upgrade, the single closing latch is insufficient to secure the lid. The weight of the bits causes the lid to flex and the bits to jump out of their slots if the case is tilted or jarred.
4. Last but not least, I've included my personal favorite. A broken bolt that had been drilled out was extracted with the 7/16 extractor. On the second turn of the wrench, the splines disintergrated.
This is an excellent resource.
I stripped the 10 bolts on my 2016 Tundra when changing the front differential fluid. mm hex bolt (toyota's design is a joke). I used a Torx head, lock pliers, a torch with a lot of heat, welding a bolt on, and chiseling. I got these, didn't hold out much hope, and was blown away when they worked. I simply hammered in a large enough extractor to allow for a snug fit. I used a crescent wrench to loosen the extractor, and it came loose with a little effort and a breaker bar! I'm not sure if I'll ever use them again, but if I do, they'll be very useful.
If you're working in a production environment and need to use screw head bolts (Allen head bolts), these extractors are ideal. br>br>If you're cruising along with your big half-inch impact and round a bolt, you can just whack these puppies in without having to drill it out. I'm currently working in plastics, and these are such a good design and fit for my job that several other technicians have gone out and bought them. It's truly outstanding.
I bought a tool from Home Depot to remove a broken shower pipe that only had one size and didn't work at all because it was too small. The multiple increments of various sizes came in handy because I bought a tool from Home Depot to remove the broken pipe that only had one size and didn't work at all because it was too small. The next size available was far too large. When the 1/2" size up didn't work, the next size didn't work either, but two sizes larger worked perfectly.
br>It's a nice gadget that's well made, but it stripped the caliper mounting bolts on my Porsche 928.
I've tried a lot of different extractors and was hoping to make this my "last purchase. " However, even after hammering the bolt in further, these teeth were very dull and would not bite into it. I started with the smallest one, which broke halfway up the bit with very little torque. It became even more difficult to resolve the issue as a result of this. I had everything drilled out and helicoiled in a matter of hours. I suppose I should have done it from the beginning. I believe the larger ones are much more powerful, but they all need to be able to bite into the metal rather than just round it out. As a "just in case" option, I'll keep these in my toolbox.
There is a disadvantage as well as an advantage. br>br>Con, there were no instructions included with thee. I couldn't find any instructions on the internet either, but there were a couple of helpful reviews that guided me along the way. (Find one that is slightly larger than the screw or bolt's hole, hammer it in firmly, and screw the item out with channel locks or a plier. ) ) A single piece of paper would have sped up the process. br>br>For the professional. This is a fantastically well-made and comprehensive set. It should take care of my stripped screw and the bolt's needs for the foreseeable future. In fact, I'm hoping that my friends and coworkers will join me in this endeavor. Workplaces have issues with screws. If they do, I'll be Johnny on the spot to deal with these thugs. I've never wished for screw heads that aren't aligned properly. Bring it on, guys. Give me a bolt remover and the pliers to turn it, and I'll unscrew the world, to paraphrase Archimedes.
Related Products For Neiko 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25-Piece Set | 1/8” to 7/8” by 1/32” Increment
