Extra Long Metric Hex Bit Socket Set, 7 Piece 3-10mm 3/8 Drive, CR-V Steel (Hex)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
3 to 4 approx. Size of bit determines how big of a bit to use
CHINA was directly responsible for the shipment. The bolts back of the hub were rusted tight, so I got them off and the bolts in front of the hub do not even look used. I assume that it is all good quality. The following is something I
Selected User Reviews For Extra Long Metric Hex Bit Socket Set, 7 Piece 3-10mm 3/8 Drive, CR-V Steel (Hex)
These bolts were used on a 6 to hold down the injector. The Powerstroke has zero horsepower. The bolts on my 06 are T45, so I needed T10 screws. All the injectors worked at normal length WITH THE EXCEPTION of number's 5 & 6 There is a bank of 7 on the passenger side. Unfortunately, it took too long for the bit to end. By taking some measurements, putting the bit in a vise, punching the bit out of the socket, cutting (16mm) the bit with a Dremel with a cutting wheel, and punching it back into the socket, I was able to solve my problem. you have done this, the injectors all work perfect. Though, keep in mind that the way this is governed may differ depending on the type of Using a Husky 3/8 ratchet (non-flex head) and a Husky 3/8 torque wrench, I tightened the screws. It may be necessary to cut a little more off if your tool has a thick head. After you remove 32mm, you are left with about 1 inch Ensure there is at least 2mm of space between the injector wire and the connector. Furthermore, there is also a few millimeters gap between the head of the ratchet and the heat shield to which it was originally attached.
Increase the quality of your work. The tools mentioned above don't come into my arsenal too often or I seldom take on a project of this size because I lack the necessary skills. Due to the fact that I was going to use these tools light duty and infrequently, I believed this set would be sufficient for my needs. There was an error on my part. When I used 27 for the first time, it broke. While I haven't used any of the others yet, I'm skeptical about their effectiveness.
A totaled vehicle required removal of the running boards. I bought this set specifically for removing the running boards. As I was using an 8-inch wrench, I guess the torque was somewhere in the double digits or the very low triple digits, and it shattered on the second bolt The ratchet I have is only a 10" one and I am not an especially powerful garage mechanic. I think that is considerably less than what a tool with a 3/8 drive ought to be capable of handling.
My beginning will use the old cliche of what you get for what you pay. The set I purchased was for the T45 that I needed to remove a pair of foot pegs from my motorcycle. It also had to have a longer shank than the one that Whenever I am working with a ratchet, I don't use any power tools. My guess is that the bolts had some kind of loctite, but I had already encountered this with another bolt that I was able to access with a short shank T45 already in my possession. Trying to remove the second bolt was a struggle as I was slipping, and the bit was It is something I have done with T25 in a drill many times, but the other time it was In terms of heavy work, the bits are not reliable, although they do come with a nice case to keep them in.
It is a fairly decent set. I would not increase the price on Due to T40's tendency to flex rotationally, it cannot be torqued accurately with a torque wrench (25 ft lbs). To set an accurate torque, I had to use a T40 bit with a thick shank. It is recommended for intermittent light use. It cannot be used in an automotive environment though. The quality and durability of Snap On are not to be expected.
As described, they came as soon as they left. Therefore, I cannot comment on their strength and durability since I haven't had the chance to use them yet.
Also, it comes with a nice carrying case. So far, the construction has been solid and the performance has been good. I haven't galled any of the screws or the bits since I got them, so that's nice. They clicked into my wrench easily, but not too easily. This is not something I can complain about. Their ability to reach difficult-to-reach areas makes them useful.
These are great shoes that will last for a long time! Durable so they will last!.
Related Products For Extra Long Metric Hex Bit Socket Set, 7 Piece 3-10mm 3/8 Drive, CR-V Steel (Hex)
