Starrett Steel Rule, C604RE-6 - Spring Tempered, Rigid Metal Ruler with Inch Graduations, 6" Length, 3/4" Width, 3/64" Thick with 4R Graduation for Machinists, Carpenters, Engineers

The Starrett will be the focus of this review, but it will mention its competitors and their strengths. A comparison would be incomplete without comparing the weights of the models A Starrett C604RE is equal to 23 grams
A Mitutoyo 182-gram is equal to 23 grams The formula is 105 27g
Shinwa H In comparison, the Starrett rule weighs 18g, while Shinwa rule 3001 A weighs 18g,

These two rules are noticeably thicker and heavier. I would describe its thickness as being similar to It has been noted by other people that the graduation font is larger and easier to read than all other brands listed on this page. I can read it without my glasses because it is the only ruler I can read easily without them. There's no doubt that this is a big plus. However, the angle at which the light hits it can affect its appearance. You can see that from According to my observation, this occurs because the graduations are pretty deep compared to the others which are much As the graduations (in 8th and 16th) are not numbered on the back, but the other rules don't have graduation numbers, so I can't dock points there, although it would have been nice to have. The rules are divided into a number of different sub models, primarily based on the type of graduations on the front and/or back of the card. Finding the sub model that fits your measurement needs best should be the first step in choosing a brand. * Is this the flawless The only way to make this right is to knock off a star. If you look at the photos, you'll see that on the Mitutoyo and one of the Shinwa models, both 32nd and 64th graduations are upright. However, on the Starrett, only the 32nd graduation is upright. There is an upside down print on the 64th. You asked (see the picture, click it) How does this affect the usage in real life? This review's 2nd photo is available for viewing. The length of the box measured by all four rules is 3 24/32nd inches. In other words, when looking at the 64th graduations, it should also read 3 48/64th. It is a Shinwa based magazine It is accurate to say that 3412A and Mitutoyo do line up. Starrett, however, looks like it's three sixteenths, since those graduations are upside-down. If you're not paying attention, it looks like it's three sixteenths. . . . You have to flip the ruler upside down, but then the inches are upside down and the inch markings start at 5 instead of 6 or 7. In response to this, the Shinwa 3001A has two sets of inch markings that are always on the right side of the ruler depending upon which set of graduations you are flipping it to. The downside to this design is that no matter which way you flip the ruler, the half of the ruler is always upside down. . . In the end, how do I know which rule is best? Well, much as I prefer the layout of the Shinwa H-combination The 3412A and the 182B are Mitutoyo The following two figures are 105 and 101, respectively There is always a right side up graduation It is heavier, thicker, and has a slightly larger font than the Shinwa, and so I prefer it. Starrett's graduations have a deep etching that feels comfortable to read, and the font is easy to read. As far as I am concerned, the Mitutoyo offers the most value for the price at about $12 and as long as your eyesight is good, it probably provides the best overall experience. If your eyesight isn't quite what it used to be and you're getting older, then I recommend spending the $26 on the Starrett ruler. Just remember to flip it if you're getting an 85th graduation and you'll be very happy with the results. Is the cheapest option the only option that matters to you? In that case, the Shinwa will perform the task. In the next few weeks, I'll have to compare the Mitutoyo and Starrett side by side in order to figure out which is actually more suitable for my needs.

Karter CHARLTON

| Apr 12, 2021

The same rule my grandfather had in his shop seems to be the basis for this rule. Obviously Starrett hasn't skimped on quality, and thus the price is probably the same (inflation adjusted) as when he originally owned it. In addition to this, there are four scales One side has 1/8, one side has 1/16, the other side has 1/32 and one side has It is my understanding that these latter scales are "quick read" since they will tell you how many 1/32 and 1/64 inches you have. Of course, the "zero inch" mark is at the edge of the study, not the middle. An object made of steel that bends. It's great if you want to measure a piece of work when you butt it up against a fence. There are even two scales (1/32) on the ends of the rule that allow you to measure in tight spaces. Moreover, because the markings on this rule aren't printed, but etched into the steel, you can feel every single gradation when you touch it. They are a permanent part of the rule therefore, even if they are dripped on by oil or solvent. There are no defects in the finish You won't be blinded by glare when you measure under a light since the material reflects Finally, the rule comes with a simple plastic sleeve to ensure it is protected against gentle abuse and is easy to slip into a toolbox. The details described above may seem small in a review, but in reality they play a vital role in a The fact that my grandfather knew this is undeniable. The same goes for me!.

Terrance Winter

| Feb 02, 2021

It is my profession to work with finish carpentry and cabinetry. It is always close to my hand when it comes to the Starrett rule. This rule has a satin finish and it is easy to read in any setting because of the crisp black markings. It is perfect for setting up saws and other machines for measurements inside the range of 6", where a tape measure is awkward to use at best. Also useful for my work is the fact that the blade is precisely 3/4" wide, which matches up with many types of trim and millwork. Last but not least, the 1/2" depth of cut scale, which is laid out parallel to the blade's length, is ideal for setting up a router or determining the depth of cut. Since I rely heavily on this rule, I always keep a spare in my toolkit and a second one in case the first gets lost.

Banks Weaver

| Mar 19, 2021

The scales/rules I described above have been used extensively in the field of aviation. The fact that they are 3/4'' wide makes them a great tool to pull out of a toolbox almost every time. They're great for layouts that are close to edge tolerances, since they're 3/4'' wide. They are scales that will last a lifetime if they are If you have foam in a toolbox, you can use an oil or wax to keep the foam from rusting. It is impossible for me to emphasize enough the importance of these products. Please tell your friends and family about this website You might even be separated from your spouse because of your laws. Their eyes will also be opened to the greatness of these products. A perfect 10/10.

Robin SWIFT

| Oct 05, 2020

It is a great rule for steel. For over a year, I have used it almost every day. This is a pricey item, but worth the money. The spring season has arrived - This item is tempered so it will not get crooked. The lines and numbers are mechanically etched very precisely and can be read clearly. I noticed a significant difference in visibility from my previous igauging rule to the satin finish. In addition, this product is made in the United States.

Penelope Hester

| Apr 06, 2021

The product is constructed with excellent workmanship, and it is substantially heavier than first appears, which is good because it won't be easily knocked off of a work station by an accidental gesture or movement.

Kailani Rowe

| Feb 02, 2021

I needed a 3/4" wide rule so I could match my 45-year-old 6" flexible rule, and this one fits the bill. Very quick delivery.

Julia Rangel

| Sep 10, 2020

I'm always looking for affordable tools to add to my collection, since I'm an amateur machine shop. This ruler impresses me with its accuracy and readability.

Adele Sims

| Jul 09, 2021