Legrand radiant Digital Light Switch Countdown Timer, Decorator Rocker Wall Switch, 4-Button, RT2WCCV4
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As soon as it switches off, it shuts down. As far as I know, there is no manual to follow This mode will always remain active.
In fact, the circuit breaker is designed to protect the wires, not the devices themselves. So long as all the wires are 12 gauge and other installation requirements are met, then the fuse can be used. A switch on this circuit is designed to power lights and fans, not hair driers. You can now run the load Except for the switch to turn on the lights and fan. Plug the power into a pigtail on the supply side and connect it to an unswitched In any case, bathrooms are typically wired that way.
As far as I can tell, this switch is primarily meant for lighting. It would be of use to me to check the amperage of your fan, followed by the specification sheet for your My heater/fan was purchased for a bathroom heater, but I neither used it nor could I In the end, I had to purchase a Leviton switch from a local electrical supply store.
I believe this timer switch can be used for an exhaust fan in a bathroom. For several years now, I've been using these fans as bathroom fans. A timer with a turn-off function makes it quite safe to leave the fan running after taking a shower so you don't forget to turn it
Selected User Reviews For Legrand radiant Digital Light Switch Countdown Timer, Decorator Rocker Wall Switch, 4-Button, RT2WCCV4
When using the bathroom fan, it is useful to be able to set the timer and let it run for a period of time to remove lingering smells, while also not having to worry about turning it off manually. It looks like As far as paddle switches go it matches up pretty well with most dimmers and paddle switches. In addition, the switch plate cover is finished in a medium gloss white, which matches most of the standard switches In addition to being one of the most affordable countdown timers I've seen, it's free as well. One drawback is that there are pigtail wires that you have to attach to your existing wiring with wire nuts. It's not a huge deal, but 3 wire nuts already take up a lot of space in your switch It would be a lot simpler if they just stuck to the terminal screws like the cheap switch you're.
The lights are always left on when my wife leaves the garage in the morning, so we bought these for the garage. There is absolutely no doubt that this product can be used for 3 way applications in its description. Despite what the headline claims, it does not. The packaging makes a very clear statement about it being a single pole charger.
Here is what I found when I tried three There is a Lutron one, a Leviton one, and one from Insteon. I feel that the last one feels like a normal switch the most out of all three. While the timer on the Lutron has a flat panel that moves very slightly when pressed, the Leviton timer has individual buttons that must be pressed in the right order. A downside to this unit is that it has pigtails instead of terminal connectors, that it requires neutral wire, and that it has a matte finish instead of the glossy one found on the majority of switches of Having said that, I would say that I would say this is the better one, and if they added a glossy white finish and screwed the pigtails onto screw terminals, it would be the best.
There are some unfair reviews of this switch due to Amazon's inaccurate description of it, which indicates that it is a 3 Turn the switch to the left. There is no such thing. I recommend that Amazon update the description of the product. I would highly recommend it if you need a simple timer switch. It's made of high quality material, looks better than most other timer switches and is very easy to use. In my bathroom closet, I'm using it to replace florescent lights that stay on too long when my wife is around. That should no longer be a problem!.
Worked like a charm. When you press the 10, 20, 40 or 60 buttons, it will turn on for that amount of time. If it is already off, pressing the large button will turn it on for the amount of time it was off for. It's in the bathroom where I keep mine. It is not uncommon for the wife to leave the fan running and a small 100CFM exhaust fan can push a surprising amount of air outside that you pay to heat or cool. One square foot of air fills a home of 2000 square feet with a ceiling height of 8 ft. The entire house can be aired out in 160 minutes using a bathroom exhaust fan at 100CFM. It takes about 2 1/2 hours. Instead, the conditioned air in the room is replaced by the air that seeps in through the doors and windows.
Although the color is a bit off, it works well nonetheless. My switch sets already had Legrand decora style switches so I bought these to match. This has been installed in every bathroom to control fans because it seems like one of those things that we forget and don't realize it's been running for hours before we notice it- what a waste! Nevertheless, they work great and look great. Nice little LED lights that stay lit all the time. Simply press the corresponding button and walk away at the proper time. Additionally, it remembers that setting so the next time you turn it on, it is ready to go. There are a couple of things to be concerned with What is the point of pigtails? The box I use for my electrical devices is already pretty tight. It isn't even noticeable, but there is a slight mismatch between the white colors. The majority of people don't notice it, but if you look closely, you can definitely see it, and for some people it might be an issue.
I like how you made it. NONE of these are the three That's the way. I bought this to control the exhaust fan in the bathroom after I showered, so that it would remain on for quite some time after I left. That purpose is well served by this software. Construction of the It is good to have quality. It is important to note that this is NOT a "3-point" scenario Switches that switch one way or the other. In this case, it's a "single-ticket" It is also known as a "pole switch". There was no need for the "3-" This feature is suitable for our application, so we use it. There was an error in the product title, so I docked it one star.
There are two captive screws to connect the switch to the box as well as wire nuts. These are manufactured in China. This switch requires the presence of a white neutral wire. Thank goodness my switch boxes have one. The ground wires were ganged together, as did the ground wire for the fan and it was obvious which wires were black and red. There are only single pole switches in my house. There will be no problem with this switch when used In all of the ones I've installed (3 so far), they've worked perfectly. have no idea how long it will last or how reliable it will be in the long run. As soon as I bought them, I knew I would have trouble with them We used 3 seat push in connectors instead of the included twist nuts to connect the wires because they were simpler and more secure.