Dewenwils Indoor Wireless Remote Control Outlet, Electrical Plug in Remote Light Switch Kit, 15 AMP Heavy Duty, 100' RF Range, Compact Side Plug (Programmable Learning Code, 3 Outlets)

She had the idea for me to use a "wireless outlet switch" on a floor lamp on a more difficult-to-reach corner of my bed. I opted to use that trick because it looked nice. My mind was blown when I found these, despite having no idea they existed. I have had amazing results from them! turns on and off very fast. You don't even need line of sight - just aim at the ground and it turns on. There have been multiple instances when the signal traveled through walls and rooms. This book is highly Another advantage is that the plug is on the side, which means whatever you are plugging in won't further increase the distance from the wall that you can put something up against, if that makes any.

Nova Buckley

| Dec 25, 2020

This kind of thing comes in handy all the time. These three are two of the three that I purchased A pack. As well as turning on two vacuums in my shop (a large dust collector and a wet/dry vac) and some shop lights without a switch, I use them to turn on dust collectors when cutting wood. I love how well they work! As well as when I'm making cuts or sanding, I use one when I need to turn on and off a wet/dry vac repeatedly. Since I don't need to get up from where I'm working or leave the vacuum running constantly while I measure and set up, I can complete the job quickly. Make sure you have a small carabiner that you can hook on a belt loop so you can easily retrieve the remote.

Magnolia Jefferson

| Nov 22, 2020

Has this resolved your problem of wanting to turn light switches on and off from a single switch without rewiring numerous outlets? It is true. was able to get this to work with SEVEN lights and the programming was straightforward. Does it work on a RF or EM interference from LED light fixtures impacts their range estimations, since the estimates are a) highly optimistic and b) highly optimistic. The use of these to control 7000 Lumen LED light fixtures can cause the remote reception of your garage door to be disrupted, just as LED lights can do with your garage door opener. This is perfect. I often have to click again to turn on some, but not all, of the lights with the first click, and sometimes I need to click more than once. I would like to repeat this two When you turn it off, it does the same thing. It works for all of the lights about 50% of the time. Minor annoyance and it saved me a lot of money over the other solution. A Lutron or Insteon product. My wife often wants to make sure the lights are on before she gets in, but does not want to open an app or use a voice command to accomplish this. We were thrilled to find out that there were keychain remotes.

Rocky Pennington

| Apr 23, 2021

As mentioned, they appear to be rated by relevant standards organizations, so I'm not so concerned about them going up in flames.

Reprogramming them so that all of them work with the same button on the remote takes some The adapter must be unplugged and anything plugged into it must also be unplugged. When you are done unplugging the adapter, reconnect it. The power button must be held while plugging the adapter into an outlet, thus preventing the plugged-in adapter from becoming disconnected from the socket. (Ensure that the outlet into which you plug the adapter has power turned on, or it The little red light should flash quickly two or three times as you hold down the power button. You can let go of the button, but after a second, press and hold it again. Whenever the red light starts flashing slowly, hold and release the ON button on the remote (number 1, number 2, or number 3), depending on the outlet you want to control. Once you have followed these steps, press and release the OFF button on the matching remote. You should now only be able to control the outlet with those ON and OFF buttons. The little red light (which indicates the deprogramming of an electronic device) may not have flashed quickly if other ones are still able to operate.

Gracelyn Hull

| Jan 04, 2021

No request was made by the seller to replace. The problem has been fixed. This page has been updated on 04/08/19. Earlier today the seller emailed me to offer to replace the entire As far as I can tell, these new ones have not caused any problems. There must have been some bad stock here. It is great to get an unsolicited response from the seller. The original review was as follows For remote control of my aquarium equipment, I bought this device. As soon as I need to work on the pumps, the lights or the protein skimmer, I want to shut them all off and turn them on again It must have been about a dozen times within the past 2 months that I have turned it on and off. One won't turn on again, and the other just won't turn on at all. It's so hard to turn them on manually that I can't even press the switch.

Esperanza Hayes

| Jun 11, 2021

While sitting on my recliner, I had to get up and turn on the light on the other side of the room, so I extended my arms to reach the floor lamp Each lamp is connected to one of these receptacles, then the wall sockets on each unit are plugged in. That's so cool! A difference of so much! Throughout my life, this has been the greatest luxury I have ever experienced.

Christina Mendez

| Mar 26, 2021

A bit over-extended The radio controls on these wall switches are very reliable and efficient. No longer do I have to turn off each lamp in the room yourself, and no longer will I have to fish Originally, I bought another brand of wireless controllers that sometimes didn't always turn off (or on) all the lights, and it was always a hassle getting all the lights to turn on (or off) at the same time. These Dewenwils aren't fantastic (they often have problems when the receiver is hidden behind something which blocks the radio wave, such as a metal trunk), but they are better than the other brand and they come with a button that immediately fixes the out of sync problem. The other brand also had a set of predetermined There was a requirement to buy senders and receivers with the same fixed frequency (which was a problem when buying on the internet). Since these Dewenwills feature programmable interfaces, you can use them for any number of sender switches and any number of receiver plugs. Once I understood the concept of additive switching, and that you have to reset the appropriate receiver plug to remove unwanted switches, and then re-program each receiver plug to achieve the desired result, I found programming simple. The switches you wish to operate this plug should be linked together.

Isla Goodwin

| Mar 22, 2021

With a Bluetooth outlet controller connected to an app on my phone, I was able to control my outlet. There was nothing fun about it. There was a clunky interface, it took entire minutes to display my on/off button, and it was always displaying There was no point to it. This is wonderful. I am so glad I found them. A large dresser does not interfere with the wireless signal at all, and my RF feature is perfect. Two switches I have up on my walls are used to turn on and off fans I have up there, so I no longer need to reach up to do that. I am very satisfied with my There are no words to describe how happy I am with them.

Khaleesi Bennet

| Jun 17, 2021