TYUMEN 100FT 20 Gauge 2pin 2 Color Red Black Cable Hookup Electrical Wire LED Strips Extension Wire, 20AWG OFC 12V/24V DC Extension Cable Wire Cord for Led Strips Single Color 3528 5050
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
90% OXYGEN FREE COPPER wires, not copper clad aluminum wires
It appears to be copper stranded wire, and no evidence of an aluminum core can be seen when it is cut.
Despite numerous sources recommending this wire for in wall installation, I doubt you will find an authoritative source to recommend this wire. The product data listings state this wire can withstand 600 watts at 300 volts or 2 amps, according to the listing (by using this equation volts times amps) is power. With regard to its design voltage of 12 to 24 volts, this wire is rated for 2 amps at its maximum capacity. Wires with a voltage of less than 24 volts should not be used. In the event that the wire cannot be visually examined at full length, then a 2 amp fuse should be installed in an accessible location to protect the wire, or As well as the materials that make up the building.
With this cable, I will be able to install gutters You can mount led strips on the wall. It appears that wire is of high quality and has a very long lifespan. My guess is that low voltage ground lighting would work well with this.
Selected User Reviews For TYUMEN 100FT 20 Gauge 2pin 2 Color Red Black Cable Hookup Electrical Wire LED Strips Extension Wire, 20AWG OFC 12V/24V DC Extension Cable Wire Cord for Led Strips Single Color 3528 5050
The wire I purchased was a perfect match for some connectors I also purchased at the same time. This wire and the connectors helped me make a wiring harness for a model railroading layout that needed to be moved to a new location without Because the color coded wire (red and black) kept connections uniform throughout the layout, it was easy to keep connections organized. It is a very good product and I would suggest it for others as well.
For wiring up the off- switches, I used this LED road headlights have been installed on my UTV, in addition to the light bar that was previously installed. There were only a few feet of wire that I needed, so this worked just fine. For the remainder, I'll add a light bar to the rear of the UTV, which should make it easier to prepare deer for the field in the evening, especially if tracking at night.
I needed to run a wire between my solar panel and my landscape lights in the backyard because I wanted to move them farther away from each other. I was able to fix it with this!.
I find it difficult even to split it apart without damaging the insulation. Usually this happens with the red wire.
It has insulation inside each wire. It's not tinned, therefore it can't be used on.
Wire was used to control switches on the indoor RR model.
In fact, wires are not split, but tear down one side or the other, as if they were exposed all the Objects of waste.
Quite a bit of value for the price. It has held up well so far.