Hubbell-Raco 6239BK Floor Kit with Recessed Duplex 15A TR Device and Adjustable Steel Box, 1-Gang, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In the inserts for passing through the cord, the cover is metal and the inserts
The cover might not pop back up if the screws are tightened. If you have already installed the cover, try loosening the screws and then pop it up. It is quite difficult to open the cover the first time. If the plate still won't open, remove the front cover from its back side by pushing it in. Leave the front cover open and push it in again. Four screws need to be installed to hold the plate in place. TIGHTEN the four screws only to the recommended tightness. If the cover is open, close it and restart You can open it now. It might be a broken, bent or defective catch that causes the cover to not close or to close without being able to be opened. I recently installed five of these and had no trouble with the covers, but they were a bit difficult to open at first.
It is true.
Exactly. I did what I said I would do. Because my jigsaw blade couldted in slightly, my hole was too tight for the outlet box to slide easily through. I cut straight through my oak flooring based on the template provided with the outlet box.
Selected User Reviews For Hubbell-Raco 6239BK Floor Kit with Recessed Duplex 15A TR Device and Adjustable Steel Box, 1-Gang, Black
Although I do try to sort through all the information and get to what I want, I find it to be a challenge. The cover of the item is NOT ACTUAL BRASS, but a plastic that has been painted to appear as if it is There are some places on the page that say "brass finish", which can be misleading.
I try to read the product description, The following product description is included with the product *Color With a recess that allows the plug to be concealed, the recessed tamper resistant receptacle conforms to NEC Article 406 and is tamper resistant . Ensures that the electrical connection is protected and that the device is not accidentally disconnected. Plugs are not visible on the surface of the It has neoprene gaskets that can be removed, so either side of the receptacle can be used independently In the pre- A fast installation is enabled by the assembly of the flange and cover. After the box has been mounted, it can be adjusted for height. This switchbox is constructed of steel, with a solid brass cover and flange and a 15A/125V plug that is tamper-proof. The words above are in quotation marks The cover and the flange are both solid brass. I just wanted to inform you that it's not.
This is the product I bought based on the Q&A There was a claim that this was solid brass. These reviews are either made out of cheap white metal brushed with brass finish, or the reviewers have no idea what brass I scratch tested it and found that it's white underneath (see picture). It is important for this reason. In most cases, you can polish brass to make it look like new, even if it's worn or scratched. Any type of wear will make white metal look horrid. When I tap the flap cover with something metal, I hear a plastic sound and feel that it is quite In addition, it is not brass. You might want to consider this for installing on a flip house (where it doesn't matter how it looks next year) or under a couch (where it is not seen and can't.
To stay flush with the floor, I needed a floor outlet made out of metal, black, and with a gasket for air and moisture sealing. The outlet also had to sit deep so that no wires would protrude out and
Those who inspected this floor outlet found that it fit in every category except it did not sit This is a good build in terms of quality. There is not much difficulty in removing the latch on the door to gain access to There is no leakage from the rubber seals. As far as the gasket is concerned, it's fine. It was a pain to install, however. I found it challenging ONLY because the template provided is 3mm closer to the actual size. My box sat awkwardly in my lap when I first put it in. After a bit of trouble, we got everything installed properly. IMPORTANT NOTE It is not possible to plug in anything other than a standard two prong or a PC style three prong plug. If you're inserting a plug, make sure that it's a three prong pc style plug or an original lamp cord Hubbell did not provide a properly sized template for this outlet, so it would have been rated a 5 star. This is so annoying to me.
Aluminum is used for the covers The look quite sturdy and are not made of plastic. 1. 2. 3. Item 4. I didn't find this to be a negative in my usage - I just found the lids somewhat difficult to open It is rare for me to unplug the sofa or laptop. Note 1. 2. My goal was to have four outlets available, so I mounted two side by side.
It was used to replace outlets on a stage that had been in service for over 30 years. This outlet is typically used for a lectern, and a narrow dc power supply gives the light enough juice (though it won't close when the power supply is It is easy to close the cover with a standard cord and it stays shut when it is closed. One of the main reasons we selected this model was its decora-style This old outlet was within 2 feet of a baptismal pool. I mentioned we were replacing it with a new outlet. To make this cover a floor cover that is safe, we changed out the outlet that came with it to a GFCI outlet. The only issue I had was that since both the outlet box and the cover must fit into the hole, there is almost no wiggle room if the measurements are incorrect. It is very important to cut the hole to the exact size listed on the plate, since the screws that hold the box to the floor are very close to the edge of the hole.
Snapping open the covers is simple if you have a strong finger - It wasn't a big deal after all)!.
During the construction of my wood subfloor, I installed this floor outlet There is a carpet on the floor. Some people may have a bit of trouble installing the system if they're not handy around the house. In order to use power tools, one must possess the right tools and have a basic understanding of their use. For those of you who want to wire it yourself, you should also have a basic understanding of electrical wiring and local electrical codes. To compensate for the thickness of your floor, the receptacle bracket needs to be adjusted. The instructions could have been a little more clear in this regard. This unit has a recessed outlet as a definite plus, making it possible to hide it behind A pop song I liked was also there The brass cover features rubber inserts allowing one to close the cover closed with receptacle plugs in, exposing only the wire. It looks high-quality and is constructed of brass with a brush finish.