Hubbell-Raco 6239 Floor Kit with Recessed Duplex 15A TR Device and Adjustable Steel Box, 1-Gang, Nickel
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Metal covers are visible on the front of the covers, and rubber inserts provide a way for the cord to fit through them.
Try to pop the cover back up if you have already installed it. If the cover is already installed, loosen the four screws. It is not easy to open the cover for the first time. In any case, if it still doesn't open, remove the plate and open the cover from the backside. leave the cover open and try opening again. The four screws should be used to install the plate. Tighten the four screws only to the point of tightness. You might want to close the cover and reopen it You can see it now. When the cover won't close or it closes but cannot be opened, the cover catch is damaged, bent, or defective. *br>I recently installed five of them and had no issues with the covers, but the first time I opened them, they were very difficult to open.
In short, yes.
In fact, I did it exactly as you asked. The hole in my Oak flooring was drilled exactly according to the template provided with the outlet box, but my jigsaw blade cam in slightly so the box did not fit easily because the hole was too tight.
Selected User Reviews For Hubbell-Raco 6239 Floor Kit with Recessed Duplex 15A TR Device and Adjustable Steel Box, 1-Gang, Nickel
It has once again not escaped my attention when looking at product pages due to the visual noise and large amount of information they provide. Although I do my best to filter out all the information to get to what I want, the process can sometimes prove to be frustrating. A plastic coating had been applied to make it appear as if it were brass, but the cover is NOT actual I try to look at the product description, which reads
There are some places on the page that refer to a 'brass finish. '
I try to read the complete description that reads A description of the product will appear below. The color will be A brass finish is used on the recessed tamper-resistant duplex receptacle, permitting the plug to be concealed and adhering to Ensures electrical connections are protected and accidental disconnection is prevented. Unsightly plugs are not visible on the surface of the The main body of this receptacle features removable neoprene gaskets, providing independent use of either side of the receptacle when the lid is In the pre- For easy installation, flanges and covers are preassembled. It is possible to adjust the height after the box has been Box is steel, cover and flange are solid brass, and there is a 15A/125V plug that is tamper-resistant. Below you will find the words in bold It is made from solid brass and has a brass flange. I just want to let you know that it's not.
As I've read all of the questions and answers, I decided to purchase There was an ad that claimed this was solid brass. There must have been an error with the review, because it has now been changed to cheaper White Metal covered with a brass finish, or the readers do not understand The undersurface of the board appears to be white when scratch tested (see photo). There is a reason why In the iron ore processing industry, the copper ore is refining into metals and could be used in the iron ore industry. Almost any kind of wear on white metal will make it look horrible. In addition, my fingertips feel warm when I touch the flap cover, and I hear something that sounds plastic when I tap it with something metal. Additionally, it is not made of brass. Considering what I know now, I would not have purchased it. You might want to use this on a flip house (where you don't care what it looks like next year) or under a couch (where it is not seen or is not reachable).
To fit flush with the floor I needed a metal floor outlet that was black, with a gasket for the air and moisture seal, and sat deep enough that the plug would not protrude out into the All the boxes were ticked for the floor outlet except that it did not sit A good build quality is evident. does not require much effort to remove the latch so that you can regain access to A good seal is provided by the rubber. A decent gasket is used here. There were a lot of steps to install it. Because the template provided is 3mm smaller, a lot of effort was put into it. A box got stuck inside me and I struggled to get it to sit properly. A lot of time was spent fiddling with everything to make it work. Eventually, I managed to get everything to install properly. *BTW *BTW In this outlet you are only allowed to use a two prong plug or a three prong PC style plug. If you are using a lamp cord plug, be sure it is a standard lamp cord plug or a PC style three pronged In summary, Hubbell did not provide a template that was the right size. This would have been a five star outlet. There's nothing I dislike more than being.
I'm pleased with them. As part of remodeling the kitchen, I hired a contractor to install the cabinets. He never voiced a complaint about installing, though I am not familiar with the difficulty. The second paragraph. Covers made out of aluminum are installed I found them to be fairly sturdy and not made of plastic. 2.
The outlets are deep enough that a Mac laptop and a Lazy Boy sofa plug will fit in the outlets I. 4. In my application, I don't see that as a negative - the lids are a bit difficult to open but in the long run, I don't see that as a problem - In most cases, I do not unplug my laptop or couch. This is *br5. My goal was to have four outlets, so I mounted two outlets side by side.
With the outlet under a lectern, you can easily plug in a narrow dc power supply to power a light (though the cover won't close with the power supply connected). When standard cords are used, the closure cover does work well and remains closed. It was its use of decora style outlets that led us to go with this model. I mentioned earlier that we were replacing an older outlet that was located only 2 feet from a baptismal With this cover, it is very easy to change the outlet to a GFCI outlet so that it is safer for use on floors. It was a bit tough to find measurements that fit the hole as both the outlet box and the cover must fit into it. If one is off by even one millimeter, there's virtually no room for error. As the screws that secure the box to the floor are close to the edge of the hole, it is important that the hole is drilled precisely to the specifications.
You can easily open the covers if you have a strong finger It can be attached to anything hard (compared to other types that require a tool), remains captive to the box (won't fall out like others), and OPENES IN EITHER DIRECTION (I hadn't considered this before installing it This wasn't a problem in the end)!.
This level outlet is built into the wooden subfloor of my house There is a carpet on the floor. Installing the system would be a challenge for someone who does not have experience in A person who plans to use power tools must have the right tools and a basic understanding of how they work. It is also recommended that you should be familiar with electrical wiring and local electrical codes if you are going to do the wiring For the bracket to fit the receptacle you need to adjust it to compensate for the thickness of your floor, and the instructions could have been more specific in this regard. It was a big plus that this unit could be concealed under furniture, since the outlet was recessed. It was also fun to listen to the pop-music The brass cover has rubber inserts that allow plugs in the receptacles to close the cover, so that only the wire is visible in the hole. The brush brass finish adds to the high quality, fashionable.