Makermotor 3/8" D Shaft 12V DC Reversible Electric Gear Motor 100 RPM
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A diameter of 1 in The radius is 5 radius). A radial alignment of 1 inch (1 inch diameter) off the center point is set up with three mounting holes.
I am not aware of any, but you might want to consider a variable speed motor and
Around 0 is what it is. The depth of the tub is 75 inches.
Initially I thought it would lift my garage flip down table but it didn't. After looking at arbor freight, I decided to buy just a wrench.
Selected User Reviews For Makermotor 3/8" D Shaft 12V DC Reversible Electric Gear Motor 100 RPM
Specifically, I was looking for a DC motor to adjust the height and low point of a drill press table with rack and pinion. Making multiple inquiries via email to Maker Motor, and explaining to them how we would use this service, they assured us it would While the motor is well built and offers a significant amount of torque, it failed miserably for my purposes. Although the motor shaft turned, but it slowed down from its spec'd 100 rpm to about 1 rpm when run using the power supply recommended by their manufacturer. As a result, while I can't criticize the manufacturer, I can make a statement that their advice was terribly incorrect.
The motor worked as expected, it arrived in good condition, and it was delivered on time. Using this motor was used to convert a manual snowblower chute rotation into an electric motor with momentary on and off switches. I made an adapter to connect the motor to the This tractor is mounted on a trailer.
Three of these objects are now in my possession, every one used in a different machine. A very strong statement. They have been out in the rain for long periods of time and run for long periods of time. My work is still going on.
As a result, all I need to do is push a button and rotate the chute to blow the snow in whichever direction or side I prefer. Playing with gadgets is even more fun than moving snow.
My contribution to this project was to use a mill table drive using the motor and a 12 volt DC power supply and pulse width driver, things that are readily available online, and so many makers out there are doing great things in their own shops. It is possible to buy standard table drivers, but they are quite expensive, and besides these sorts of projects are very fun to do.
Little monster with a lot of power. As part of the construction of my coffee roaster. In it a 20lb drum is being turned with a 5lb weight of coffee in it. The atmosphere is quiet enough for the to hear the first and second crack of the roasting coffee. It has only one small complaint after using the machine for a couple of hours, there is a little grease coming out of the shaft. Hopefully, I will be able to buy more in the near future as long as it holds up.
With the help of this motor, I was able to drive a conveyor for a prototype I was Motors with over one hundred thousand RPM have a high torque and are easy to control by PWM. The performance I received from the students left a good impression.
This is a very nice I am using it to power a stand-up desk I am building and so far, it seems to be working just fine.