5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

$ 25.99

Score By Feature

Based on 34 ratings

Value for money

8.11

Packaging

8.50

Giftable

8.06

Customer service

8.33

OveReview Final Score

How Our Score Is Calculated

Product Description

The MACH3 interface board connects to the computer via the USB port and the 25-bit LPT port, but the USB cable cannot exceed 1 meters in length. The USB cable and the 25-bit LPT cable cannot exceed 1 metre in length. The distance between each tree is five

An input/output (I/O) chip with high speed is used to process the With its features, it is able to keep the machine running smoothly, correcting and enlarging the signals to eliminate unwanted disturbances.

In the computer, the LPT port supplies the power separately, separating it from the power supply of the rest of the system. This means that the machine tool and the computer are effectively isolated. This increases the security of the data, as well as providing stability and security.

A total of 5 input signals are connected to the host computer via the optical connection, which acts as an optical isolation. With the optical coupling isolation, the P11and P12 are high-speed, and can provide both the same kind of signal as the hand wheel A and B as well as signal for main shaft encoders.

A total of 12 output signal is available, which may be used to control output, and is capable of supporting as many as 6 axes of There are some functions in the output ports that can be reused. As of now, only one function can be assigned to one port. As this board only supports the LPT port, if your laptop lacks a parallel port, you'll need to buy a PCI to LPT converter card.

Questions & Answers

Does this unit have any type of wiring diagram?

Download sane smart from the sane smart website

An engraving machine I have is a Sunwin 3040 engraver with a HY-jet hy-jet In 2X4A 5 There is a box marked T69. The software is no longer available. To run this on a laptop at school, I only have a Windows 10 operating system. Do you have any suggestions for me?

Make sure you have mach 3 or 4 and Windows, as well as the correct break out board, and do the research.

Can a P4 relay be used when the x-ray is not a good solution Pin 4 is used as a step output by the axis? I had a bad day when When an axis is moving, the relay on p4 is triggered. ?

There is no requirement that port 4 must use a specific function. In the event of a relay failure, the on-off switch will take over P2, P3, and P4 on the board will follow the following specifications *br>All the jumpers of the electric appliance should be plugged in, and the three output ports cannot be used for the other motor shafts. It's a standard delivery, the relay does not work, that is, it has jumpers for P3, two feet are plugged in, and the P4 is inserted only into the left foot. *br>This model can also be used with A P2P3P4 cannot be enabled with 6 axes since the relay function is not available. The P4 relay on the MACH3 interface board uses this jumper to control the operation of all three relays. I have sent the user guide and mach3 settings to your Amazon mailbox, you can download them to get more detail for P4 relay, thanks!

Selected User Reviews For 5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

There is a catch, this seems to only work with Windows XP and a parallel port

3/5

If you have Windows 7 or higher, When you email the seller and ask for a manual, it does say there that only supports WinXP not Win7. Despite the lack of mention in the description on Amazon, you will notice it in the manual when you request to see the instructions. The result is that I now have a brand new board that I can't use! There needs to be a clear disclosure of this information from the seller. You have nothing to thank me for! I am updating The seller has since updated their listing to state that this product can only be used with Windows XP using a parallel port, and it cannot be used with Windows 7 or higher. Thanks to my review, it now shows that this product will not be compatible with Windows 7 or above. Therefore, I am upgrading the star rating from 1 to 3 so as to be fair to the seller. The seller provided the user guide when I first asked for it when I first emailed them about the board, despite my not being able to use it yet. The description of products sold by some sellers include a download link to access the documentation if they do not send it with the order. It is much more convenient for the buyer to contact the seller this way than to search for a way to do so. A firm believer is that if you do not have something nice to say, you should not say anything. follow that, but in this case, other buyers should be aware of the limitations of this board. I think most Windows XP machines with a parallel port would be fine with this board. The user guide that you can request from the seller is decently translated from Your life is in danger without it.

Paloma Wang

| Mar 04, 2021

The instructions can be obtained by asking

5/5

Having replaced my PNC 1100's bus board, I can now use my unit easily. The Tormac 3 series now has 5 axes and I can use any program that I want. Anyone who has a TorMac machine can do this as the best upgrade. I've finally been able to unlock my machine. A monopoly is a horrible thing due to the fact that I am tied to one company. own a Tormac mill and want to upgrade to more axes and unlock the true potential of your mill, then don't waste your time with an old school motherboard get this one instead.

Troy Dillon

| Mar 17, 2021

There needs to be an improved user manual for this board

3/5

Despite its appearance, the board seems to work all right, but it needs a more detailed manual about wiring. As far as Chinese made boards go, it's about average. In the kit, there is still a USB connection and cable, so it is unclear if it requires five volts of power from the computer's USB port. The manual indicates that it is not necessary, but there is still a USB connection and cable so I suspect it will work.