Parts Express LED Fuse Lamp for Marantz Sansui Kenwood Yamaha Sony - Warm White 8 Volt 5 Pack

It is however necessary for some slight modifications because of the length as these are longer than stock bulbs so u cannot place the ferrule in the clips because they have end stops. As a result, without a simple modification, these won't fit in a few Sansui models, which use a shorter length bulb. Once you've modified the bulbs, if your clever enough to manipulate them, you'll be able to change them. Using a pair of small needle nose pliers, you have to bend all of the fuse clip stops outward/backwards to give the longer fuses a little more room for movement. Even bending them out 90 degrees from their original position is not necessary. As soon as you do this, they will fit perfectly. To clean the insides of the clips, you can use a cotton swab with isopropyl alcohol, and you can use the needle nose pliers to bend the clips in a bit so that they fit tightly together. The fun part comes now, though. Since these are quite directional, unlike incandescent bulbs, they are a bit harder to spot on the road. The first thing I did was to point the leds backwards of the white plastic housing so the light would reflect evenly backwards. LOL, you could barely see the light on the display. Thus, you have to align the tuning display and the two meters in the same direction. By putting the color back to its original state, the color becomes very close to the What is different about this is that it looks completely different. As a result of the bulbs not being as bright as the original bulbs, the lighting is uneven, since the display is slightly brighter right in front of the three I like how the meters look much brighter and true to their original appearance. Due to the uneven illumination of the tuning display, and the fact that you need to modify the fuse clips, I gave this product 4 out of 5 stars. You should also keep in mind that a lot of receivers use a 6 slot. There is no 8 volt connection for these bulbs, so despite them being capable of more lumens, you won't be able to see them. All in all, I am pleased with the results, and with only 6 I can still afford to eat out. Powered by 3 volts, these batteries are built to last a lifetime. This is a great deal at a great price.

Kira Estes

| May 13, 2021

The process of disassembling the front of the receiver was more time consuming than the process of replacing the old burned out light bulbs with LED ones. Despite the effort, though, it was worth it. I love how well they fit. There is more brightness in them. A filament light emits a yellow light rather than more of a white spectrum. Having the LED's on the receiver makes it look much better and brighter. There is a need for five of these lights on this receiver. It is LED so I won't need to replace the lights again. However, I wouldn't hesitate to order again if the need arose. They are much better than I had There was no problem with any of the 5 lights in the package.

Carter Guthrie

| Apr 23, 2021

I'm surprised they can in LED lights, as they shouldn't cause such a heat problem or burn as fast as old incandescents did. In my case, my Sansui 5000x has taken 7 total so I purchased two packs of 5 and I am left with 3 extras, Since I got my unit with all of the bulbs burned out, it was not possible for me to tell any difference between them and the regular lighting. really good though and I was very satisfied with the final result. Point the LEDs out towards the front of the The number 6 has been replaced. There are 3 volts in the battery. The fuse for Stanley bulbs is 25 amps.

Avah Torres

| Oct 10, 2020

If you need LED lamps to replace your gauge lights and the source lamps, you may need to search for a complete kit with LED lamps as well. Fortunately, the fuse lamps shown here appeared to work just fine. You should ensure that the LED element faces the panel in order to achieve a proper lighting environment.

Abdullah Shah

| Nov 17, 2020

A friend gave me an old Sansui receiver that I was looking for these for. There were incandescent bulbs for sale for up to six dollars each This is absurd. I plugged these into my computer and they worked perfectly. These also look cool, but you don't get to see them once you've put all the pieces.

Jaziel Newman

| Dec 12, 2020

I have repaired the original fuse lamps in Marantz and Pioneer receivers from the 1970s. I had no problems fitting them. If you intend to dig into your receiver, make sure it is unplugged. It looks good, the new look on the The best part was that I probably won't have to do it again, though it was kind of fun.

Jeremy Church

| Jan 23, 2021

I have an LR-84 that has been well-maintained and restored and these lamps work great with it I received a 220 donation receiver from the These lamps were a pleasant surprise to me. There was a difficult-to-fix bug in D5 Turn and scratchy controls, plus an array of lamps, give the setup a finished look. (I used lots of Q with lots of Q-shaped You can also find tips here.

Gerardo Doyle

| Jun 24, 2021

Perfect fit, simple to install (at least on my receiver) and looks.

Evan Fuller

| Jul 04, 2021