HY-C SPSS913 ShelterPro Bolt On Single Flue Chimney Cover, Fits Outside Existing Clay Flue Tile Dimensions 9" x 13", Stainless Steel

Even though this unit was one of the cheapest in comparable units, the overall value of the unit was not what I anticipated. There is no doubt that the specifications are accurate, and there are all the comparable features listed, but the details and construction aren't what they should be for a quality "lifetime" 1 .
There is no way to fit a 12 x 12 flue liner in it. mesh does not seal to the liner at the corners when it is turned down. This application also requires insufficient screws on the corners in order to attach the device to the surface. A 12 x 12 application cannot handle such a big piece of hardware. Secondly, there are no hemmed edges on the top. The object is simply a piece of SS sheet metal with very sharp edges
3. There is roughness in the mesh, since it is.

Aurora WHITEHOUSE

| Dec 07, 2020

I decided to purchase a ShelterPro replacement chimney cap rather than reinstall the old one after our twenty-year-old chimney cap blew off the house in high winds. It was so bent and damaged that it would not suit me to I choose this replacement because it My old cap was not the correct size, so I ordered this ShelterPro replacement cap carefully. A warning though. Although this cap is far superior to the original, be aware that it is heavier than similar caps The edges of these are sharp since they're made of sheet metal. If you install with work gloves, do so with caution. 1 *br Its stainless steel construction should prevent rust (and that older one was a 2
Using spot welds, this assembly is stronger than the old one which was pinched and riveted together, resulting in loose fittings and flimsy construction. Heavy duty machine bolts are provided for attaching the bolts to the stainless steel band, which then attaches to Earlier models came with course screws that pressed directly against the flue, so they could potentially damage The fourth paragraph. As the two caps are side by side, it is clear the ShelterPro cap is of higher quality. Due to my lack of ladder skills, I called a chimney sweep to do the installation. A total of $80 was spent on that installation. The cost was $00, which I considered more than worth it. I asked him what he thought of the cap after it was installed quickly, and it only took him 10 minutes. His opinion of it was that it was undoubtedly the best he had seen. My purchase was approved by a professional who has seen a lot of these, so I am happy with my decision.

Talia Phelps

| May 11, 2021

It was necessary for the 1" excess screen edge material to be folded inward during installation. Forced combustion onto clay chimney would not be a good idea without some pretreatment An edge of this screen has been folded. You can't do it easily with your A thick towel helped me fold us as much as possible, then I hit them with a hammer to make them even flatter. In order to secure the unit to the chimney, it must be gently hammered down. It surprised me that there was an additional screen I would need to fold, but looking back, it made the fit much more secure. Luckily, I only had to finger tighten the screws to a certain extent, since the folded screen fit snugly against the chimney. It is more challenging to install than one might think, but because this cover cannot be dislodged by the wind, I don't expect this issue to arise. Please consider this product. The tools you will need are Tool kit includes a hammer, a mallet, heavy gloves or a thick towel, and a.

Marlon Carlson

| Apr 12, 2021

I did not have any trouble installing this Chimney Cap. I received instructions insisting that I read the instructions carefully and take precautions before I proceeded. Despite the fact that they took precautions, one very crucial thing was overlooked. Using gloves with this chimney cap will help protect your hands from the sharp edges. Due to the hard way my hands were cut badly, I found out the hard way.

Kaylee Spears

| Jan 23, 2021

Although I was very excited about the product, due to its size it didn't fit me. Although it said it would, the bolts failed to reach due to the curved edges of our clay chimney. There would have been no problem if the bolts had been on the sides.

Charlie Suarez

| Jan 03, 2021

This seems to be a high-quality product. I am very happy with the shipping time and the packaging. This seems to be pretty heavy duty, except for the spot welds on the diamond plating, which in my opinion are not adequate. Due to the aggressive birds in my area, I added stronger nails to hold the diamond grate in place. While this was more expensive than other versions, it offered comparable levels of functionality. Keeps the birds out and does an excellent job of keeping them out. This deal is the best on Amazon by far.

Dario Benjamin

| Jan 07, 2021

The roof has been on my own for more than a year now. Despite a few rough storms, snow, etc. , I've never had an issue with this product - works great! I use this to keep animals, weather, and other elements This book is highly recommended!.

Aries Wall

| Aug 15, 2020

The right fit has been found for me and I am so grateful! There is a large chimney cap/cover I found and that is exactly what I needed. It has now become easier for me to de-stress. I lost all the top of my chimney because of the May Tornado. I completed the work for the chimney after the masonry was completed by this purchase.

Zaire Stanley

| Nov 24, 2020