Bona Mega ONE SEMI Gloss

Hi and I am glad I can help you with this question. Using my 24 in swivel sweep applicator, I was able to pour it right out of the bottle onto a line on the floor and the coverage was amazing. My method was to do three coats, each code for 20 minutes, and then to allow for a few hours of drain time between each coat so that it is not sticky on my feet when wearing medical booties, so long as it is dry to the touch and does not leave an In years past, the older people got no headaches from anything else, as they were much less like any type of stuff. Lastly, after speaking to Bona Rap about all the Bona material I decided not to send in between each coat of material since it was very durable. The same exact materials will be used in my living room once the floor has been prepared and is Please accept my sincerest thanks for your assistance. My best wishes go out to you as you complete

My name is Jim and I hope the best for your project. I'm not a professional on this but I've never used any stain before so it turned out amazing. I hope this helps. At about 77 degrees F, I dried three coats almost instantly and followed up with another four and a half hours to dry between coats. Immediately after I sanded the whole floor with 60, 80, and 100 Grit, I laid it right over the bare wood. My experience on this floor can be very critical, as I have already learned a lot even before I stepped on it. Based on what I understand, the Bona Mega is a water-based device The clear coat must be water based so that you can stain it with a water based stain, then allow it to dry thoroughly before mixing oil with it. An oil-based stain can be made with water There may be a problem based on clear codes, but keep trying to make sure so your project will turn out the way you envisioned. It's great to hear from you