Broan Blower Wheel Part # 99020144
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As it costs so much to make If you have to pay for shipping, it might not be worth the effort to search for a wheel that will cost about the same as the part.
Bore is 1/4" diameter, size is 3 1/2" x 2 1/2"*br>We did measure the dimensions
A brand new blower came in the mail
In fact, yes. Having a flat side makes it easy to attach the motor to it.
Selected User Reviews For Broan Blower Wheel Part # 99020144
In spite of its different part number when compared with the one in the manual, the wheel was able to work fine. It is about 1/4" smaller in diameter than the original, but the most important thing is it fit perfectly on the shaft of the new motor. It is unlikely that a slightly smaller overall diameter will have much of an effect.
The metal clip that keeps it attached to the shaft compresses some of the plastic so that it keeps its position. There is a tight fit on the shaft, but this is the correct part. In order to get the wheel in the right position, you will need to exert some effort. This is a good value for the price. Replace both the wheel and motor at the same time for the.
I was worried about replacing the whole fan or the whole vent is amazing for finding parts like this that are hard to find. In 2 minutes, we can deliver and install your new appliance. *Brief *Brief *NOTE It only goes one way "ON" the motor post, so you need to move slowly when turning this on. Thank you!.
The item you will receive is not what is As you can see from the photo attached, the fins are clearly angled in the opposite direction, and this will not work with the fins angled the wrong way.
While it is true that the part numbers match, etc. , it will also fit onto the motor shaft (with sufficient Yet you mention here There is a difference in dimensions between the original and the new part. Compared to the previous version, this one is more compact. In the original, there was a The following are the dimensions 7" x 7" A new feature The diameter of the ring is approximately 4 inches. Thus, no harm will be done, but the fan will be less efficient in two ways As a result, the fan itself will move less air, and the increased gap between the fan shroud and inlet will enable air to be drawn in from the high pressure area. There is a possibility that this move was made in order to save on material and manufacturing This part will get used, but I am not very thrilled with it.
Despite what the picture shows, the part I received is identical to the picture, which makes it unsuitable for A 6mm hole has been drilled in the central shaft rather than a 5mm hole. I was looking to replace the old part that was a little over 5mm long. Since it falls off pretty much the minute it is attached to the motor, it is used for no good reason at all.
I saved $100 by doing this. There isn't a single fan in our newly purchased older home that is not on the brink of collapsing. Using this fan, I was able to fix I am thankful. There is no problem. This is one of the simplest and cheapest fixes.
When I finally climbed up, I found out what the weird noise was and saw that the hamster wheel had broken completely. You won't find this in any home improvement store! Thanks Amazon! It was just what I was looking for!.