K&J 6ft Heavy-Duty Washing Machine Drain Hose With Clamp - Industrial Grade Polypropylene Discharge Hose for Washing Machines - Fits Up To 1-1/4 Inch Drain Outlets
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no need to extend an existing hose with this
The width of about 2 inches
It can be hooked up since it is wide enough
There seems to be a multifull size that can be used. It's not an expansive item, so give it a try.
Selected User Reviews For K&J 6ft Heavy-Duty Washing Machine Drain Hose With Clamp - Industrial Grade Polypropylene Discharge Hose for Washing Machines - Fits Up To 1-1/4 Inch Drain Outlets
As long as the hose is the right length, I can cut it to the length I need and install it easily. The water that leaked from my washing machine sawped across the garage floor as soon as I started the cycle. He luckily hid in the garage, rather than inside the In hindsight, I found that the hose clamp that was included with the hose was too big for the fitting that I've trimmed to fit the drain pipe on the washing machine, so it did not seal firmly from the outside. In order to handle this issue, I had to hurriedly buy a small hose clamp from the hardware store. The leak is now fixed and the hose clamp that came with it is working well so far. The included clamp may work for the bigger fitting, however you'll need a #12 hose clamp for the smaller one to get.
An excessive amount of water is leaking from the washer's connection. Eventually, the water leaked behind my washer and damaged the Sheetrock and trim behind the machine. It was such a slow leak that I didn't realize damage had already been done until it was too late. In the neighborhood of $1600. Meanwhile, the subfloor and wall studs were drying out for almost two weeks, so we had to do laundry at a neighbor's house.
Other than the price, I didn't like anything else about the job. In hindsight, I wish I would have just paid more, but then would have avoided 4 hours of work trying to stop the water from flowing on my floor and causing When I first read the reviews, I thought maybe the tube was not connected correctly. When I opened it up, it was clogged with bits and pieces all over. It was clearly a lousy product. I can't believe they're selling it. A lot of stress is caused by this and I'm sure a lot of damage is caused. A boycott by Amazon is the only way to stop this from being sold. A review is a good thing, and companies need to hear the voice of their customers. I am completely dissatisfied and disappointed with the entire process. We all look at the photos and imagine what it would be like if you were to experience this. This is trash!.
A number of different hose sizes can be attached to this, so it can work with a variety of washer outlets of different sizes. It also features gates style clamps that can be adjusted by anyone, no matter how strong or weak they are. They only need a broad edge screwdriver or a nut driver of the correct size. I don't know what else to say other than that Whirlpool shouldn't have been so cheap and delivered a 6 foot instead of a 4 foot drain hose. Whirlpool built this unnecessary expense into the washer because it is only possible to install the washer with a 4 foot drain hose 33% of the time.
It was hard to tell the difference between the hose and its packaging at first because the wire was twisted in three places after it was coiled tightly in the packaging. In one case, it seemed pretty serious, but after installation it was determined that it would not block water flow. In addition, I noticed that the connector at the washer end was straight when I was installing it. In addition to the rubber elbow, the replacement hose had a plastic In other words, if I pushed the washer too close to the wall, the hose would kink, so I had to make sure the washer was far enough from the wall to avoid this. Rubber fittings on the end came in three sizes, and I had to remove the largest two to get this piece to fit properly. An effective pair of scissors is needed for this task. The clamp tightened it to an acceptable level, although it still appeared to be loose. There is no way I would buy this hose again or suggest it to anyone. The system seems to have been working so far. I will report back with any trouble I encounter from the kink or any leaks that occur at the washer if they occur.
Several things caused me to order this product, including dissatisfaction with the drain hose that came with my new Whirlpool washing machine. The product is well designed and The material is quite strong. There is a universal end that connects to the washer and can be used with a variety of My washer's end needs to be cut in order to fit. There was no problem. The hose clamp which is included is a high quality one Whenever I need to secure a hose, a hose clamp is my first choice. Generally, I find this product to be very good, and I highly recommend it!.
It is not recommended. Earlier this year, the hose started leaking where the seam and spiral part meet. This is disappointing considering the hose is marketed as being "heavy duty. ".
Five years after I bought my old hose, the hose developed a small tear and leaked water onto As soon as I found out it was defective, I immediately went to Amazon to order All the hoses that come with machines are made from The hose has a gray rubberized coating and looks as if it is reinforced to ensure long-term A similar hose might be found on a high-end vacuum cleaner. The hose had to be replaced, and it was fairly simple. A well-made product, it seems, and I was able to cut it where I needed in order to fit my machine. It seems to be of good quality and it solved.