KL KEY LANDER Hot Tub Spa Pump, 1.65 HP, Single Speed, 48Frame LX Motor (115V OR 230V/60Hz); 2" Port; OEM# 0974101-03; 36675-03; and 48WUA1653C-I
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This is 48WUA1001C This unit (48frame, 115V/60Hz, 10) can be used with the IX series. Three. A. Three. is not a replacement for The Florida number is However, we also have this alternative Item 48WUA1501C - The one you have should be replaced with this one. With two speeds, two speeds, and 115V/60Hz, the II is a 48Frame, 13 hp pump. The current is 8A at high speed A pair of 8A@Low Speed, 2 inch unions are If you do not have it, you should have a 48Frame,115V/60Hz,15A at a high speed and I'm using 9A at low speed. There should be no difference in performance between the two pumps.
Upon further inspection, I find it to be a 220V, 2-amp pump The speed of 10 minutes. 2A and 2A. A 6A power supply, 48-volts, 60Hz This motor drives the frame. This is 48WUA1502C There is a 220V, 8A/2 output on this power supply. You need to replace your current one with something bigger (6A, 2 inch port) that will meet your current needs. Our 48WUA2002C is not compatible with Whether it's a II or II (220V, 10A/3A, 2 inch port), it'll match your existing You can search for it on Amazon by typing in its ASIN # B085BZZWN7. The company.
It worked for me. It can work for you as well.
The answer is yes. If it is the 48FR, Single Speed, 2, your original pump should be suitable. The HP is zero, the 8 is eight. The voltage is 230V/50Hz, and the amps are zero. A 48WUA1502C-compliant wireless access point PII is a 2 speed pump with a 48 frame, 8A (high speed) motor and two pumps. (Low Speed) 6A (Low Power) The input is 230V/60Hz and the union is 2 inches. need only pull the high speed lead according to the wiring diagram found on the motor, and you should be good to go.
Selected User Reviews For KL KEY LANDER Hot Tub Spa Pump, 1.65 HP, Single Speed, 48Frame LX Motor (115V OR 230V/60Hz); 2" Port; OEM# 0974101-03; 36675-03; and 48WUA1653C-I
As a replacement for another 48 frame pump, I got this one because it is readily available and it offers more features I only have one problem with this pump, as the front housing can only be rotated 90 degrees at a time, but my original pump is adjustable every 45 degrees. Adjustments must be made to the outlet plumbing for it to function. It seems the pump performs quite well at low operating pressure, especially in the low.
I found the installation process to be simple. Right on the nose was the fit. A, B, C, and D were the wires. It was time to replace the pump in my hot tub so I bought this pump from Amazon (KL KEY LANDER Hot Tub Spa Pump, 1. 0 HP). The motor has five horsepower, two speeds, and 48 frames The issue is 2"). You won't have any problems following the instructions. The KL KEY LANDER Hot Tub Spa Pump, version The motor has five horsepower, two speeds, and 48 frames Two inches are the size of my hot tub. It is 15 years old and in good condition. In order to fit the pipes on the pump, all I had to do was turn the impeller. I removed four screws and turned the impeller and it worked perfectly. I am a 70 year old lady, so let me let you know how easy it is.
This device is a little more powerful and fits perfectly in the place of the one it replaces. There was a pump they were going to replace that would cost us 700 dollars and was only 1/2 horsepower. Better than the previous one. The pressure is better now. It was easy to connect and a good fit, although the wiring instructions were a bit off. Rather than showing the board as it would be oriented in person, the photo shows it backwards. I had it wired for 220 the first time and realized something was wrong when there was not a lot of Once it was back out, I took it apart again to identify as many circuits as possible. Once it was wired up, it worked like a charm. Our use of it is at least an hour a day, and we have not had any issues with it.
Although the motor has all of the same specifications as the one it replaced, what I neglected to think of was the capacitor's placement. The new motor has two instead of the single one on the old one. A little bit of plumbing and the spa pack were impacted, but we were able to resolve all issues with a little rigging. Compared with the old motor, the new motor is much quieter, but it was not difficult to change bearings since the old one was I didn't need to use the new ends because my old ones worked The product is overall something I would buy.
Exactly the same as the one I had on my Hudson Bay HB19 Spa, this Pump/Motor assembly is the right counterpart. Approximately three years after it was purchased, the motor started to make noise as if the bearings were faulty. A pump impeller was coming apart. You need to buy the whole assembly instead of just the motor it's not possible to separate the pump In spite of draineding the spa, there wasn't a lot of hard labor involved in removing and replacing, and for someone who's mechanically inclined, it was an easy task. It was easier to call the spa doctor instead of saving money.
As per the diagram, the pump is inexpensive and easy to wire. However, it does not fit inside my hot tub. Due to two giant capacitors mounted on top of the pump, I would have to modify the spa frame to make enough room for them. As well as this, my pump opening is two inches, and my hot spa pluming is one inch. It is 5 inches tall. To match the pump with the reducer, I must purchase one. Last but not least, the pump runs like a dream and is incredibly quiet. Thanks so much!.
My husband got frustrated during installation as the old model is no longer available and I needed a little muscle help from him, but I was able to do it myself after I got frustrated. PATIENCE IS THE Overall, though, we were pleased with and saved some money since we didn't have to pay as much as what the manufacturer wanted. In my opinion, I would buy this product.
Despite the bracket being on top of the pump housing, it is not necessary Furthermore, it did not allow me to position the pump connections in the position I wanted. It would have been necessary for me to re-write This bracket was supposed to be used for plumbing the spa, however it was removed and a standard spa bracket was used instead. As of yet, the pump appears to be working well.
Related Products For KL KEY LANDER Hot Tub Spa Pump, 1.65 HP, Single Speed, 48Frame LX Motor (115V OR 230V/60Hz); 2" Port; OEM# 0974101-03; 36675-03; and 48WUA1653C-I
