EZ Pass/I-Pass/SunPass Adhesive Strips
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
New EZ pass toll tags are fitted with a stick that includes Velcro tabs. You might need new Velcro tabs for a car you purchase new or a toll pass.
The original pass comes in two sizes if these are the same. You should get the same performance out of them in both heat and cold. On vehicle windshields however, regular velcro, however, will not hold up to application. It does not damage the little pegs if there is velcro on them. The adhesive does not work, and the adhesive fails. Falling off the window keeps the pass from falling down. Having slid my pass in when I was shifting from the console, I just received a $10 invoice for $3 tolls. It would be advantageous if you paid for these. These are bargains.
After removing the EZ from the windshield, the old strip remains. Taking out the PASS unit might not be that straightforward. The longer they were affixed, the more difficult it is to pull them off. Box cutter you can use to cut each strip, or some other tool you can use to hold a blade that you can scrape or pry with until they turn white. However, if a product like goof isn't available- tion like goof- You should be able to loosen the adhesive once you remove that.
I can do this with anyone at any time. ezpass does its part, however, so you will have to contact them first.
Selected User Reviews For EZ Pass/I-Pass/SunPass Adhesive Strips
Just ordered them today on the EZ pass website and went online to update my address, and I've realized that they are available for as little as $20.
I was satisfied with these adhesive strips since they meet exactly what I need. In Illinois, I have an iPass but I do not live there. Due to the poor condition of my old car, the new ones could not be moved with me since they had been sitting stuck inside it. In a couple of trips down through Chicago, I ended up losing my iPass transmitter because I went through tolls without it on my car. To get replacement headphones in person (that I am aware of), I can visit the iPass offices in Oasis or visit Jewel Osco stores in Illinois, but I can't seem to find them in stores that will be open while iPass is off-peak. The Amazon store had them waiting as long as I wanted, which made this perfect as I could buy then and wait as long as I wanted for them to arrive. Once they were arrived, they were exactly what I ordered and put them on with no delay. Each pack had an alcohol pad in place of the glass on the windshield where the mounts will stand. After I stuck the windows in place, I lifted the panels up. Well, I went along fine. It did not seem in the instructions that trimming them was advised. Based on my tests, my iPass features three smaller strips. This seems like a strange configuration. An iPass screen with three-inch strips is attached to a five-inch strip on my windshield. However, it was my mistake at the time. If you need to add extra strips, such as for a new car or for multiple vehicles beyond what you currently receive with a new iPass, I would recommend these services.
Using it with my Pruveeo F5 dash cam, which was prone to adhesive failures, both versions failed in terms of holding. As soon as I followed the instructions, the camera turned off right after. Purchasing roculator heavy duty tape, which definitely performs, was a wise decision. As a consumer, do not waste your money with this product.
Finally, after having been driving an EZ-T for 18 years, I bought a new vehicle and had to transport my car for an extended period of time. Pass. A 15-year old adhesive strips for the windshield needs to be replaced, and I am in need of new ones as well. On the device, there were no weaknesses. On this item, we bought it with adhesive strip on it that was larger than its length but they grip tightly even in this case. Using the included alcohol wipe, wash the windshield, dry it out, and then apply the strips on it. A period of about 30 seconds went by without any pressure being held. My EZ-System goes down in less than three minutes. The pass passed without a problem and was ready to use again. The battery hasn't dropped off since I've been using it for a few weeks.
The description was a little misleading. I found the descriptions to be very straightforward and assumed it was only going to be two units per device. According to the description, the four pieces listed are only for TWO MATING STRIPS (one pair for each of the passports). One pair of noodles can be used in an interchangeable unit for a relatively high price. I do not have any problems with the strips because they have the same length as their IPASS units. With it being 3M tape, it should hold the device securely in place to the windshield. There are some additional vendors on Amazon who sell more strips per package, but they are only one-tenth the price. These strips have a length of two inches and are five-inches long. Keep on sticking to your plan and it should start going up in 3 to 4 months in the blazing heat of the southern US.
I spent more on Home Depot for a similar product compared to the manufacturer and the consumer. Amazon sells a product where I found this product looking the same when it was turned over every time the sun is in the evening. I was perplexed by why there is no instruction on what to do with the alcohol cleaning pad. As I initially thought it was just to use the adhesive on the windows that were no longer required, I realized it was for window cleaning - which wasn't really necessary but I'd done The Velcro began stronger than the glue at first, so the first time I tried removing it, I ended up with the glue stuck above the second pass. As I write this item has been in direct sunlight for two weeks now with no evidence of an obstruction to the product, which suggests well over 100 degrees in the car, no evidence of the window being broken. Wow! Hooray!! My definition of what this product can achieve is a working solution. I can give it a thumbs up.
Two vehicles will be allowed to mount simultaneously. 1/2 is all I need because I had no plans to order additional items (so I said I would use 1/4 instead). The mount of the pass unit had already been attached. My windshield mount is now ready since the strips arrived in full length so I cut 1" in half so I can mount. With this new kit, I'll be able to fit 3 strips on future vehicles. It's important that I place them where I'll never forget them. No Velcro here!! There isn't anything to anticipate. There is an identical 3M mount on this model. If you pass it, it'll take only 100 times as long to attach Velcro. Having said all that, if you need a mount for your I-mount, then you should do so. You need to install a toll unit that passes or another windshield mount one.
I pealed off the old ones a put! This is exactly what I expected to find!! A few days after purchasing a new car, I had to move it. It wouldn't have been difficult for the transponder I bought off the window once I got the new one off and put one back on. Using one of the ugly glues, I feared I would have an unpleasant situation. Here you come with my beautiful product; we're back to business! I put the new ones on the old ones and then mounted the ones, so I did the work. Thanks.
Related Products For EZ Pass/I-Pass/SunPass Adhesive Strips
