Fiskars SureCut Portable Trimmer with Recycled Cutline, 12 Inch Cut, Black,01-005454

My overall experience with this cutter has been good. Currently, it works as well as any cutter of this style, but it isn't perfect for what I do. Getting the paper ready for cutting As a rule of thumb, I wouldn't recommend cutting more than 3 to 4 sheets of standard copy paper per time, and no more than 1 or 2 sheets of card stock at a time, depending on the The blade of this cutter is shallow, so if you want to cut large amounts of paper, or if you need to cut thick stacks, this cutter isn't It is really necessary to have a guillotine cutter for this type The following are the cuts I made The vinyl decals I cut with my cutter are pretty thick, so it takes a lot of power to cut them. The packaging consists of a waxy backing paper, an adhesive vinyl, and a layer of overwrap It is laminated. My cutter can handle two sheets of the thick material, but I like precise cuts, and the sheets slide together easily so I want to work quickly. I don't use a guillotine cutter for this work because I want my cuts to be extremely precise My decal sheets come with cut guides, which make it easier for me to line up my cuts. Blades
I often have to cut hundreds of vinyl decal sheets at a time, so my blades tend to wear out My Fiskars cutter was cheaper than the other brands since I could buy a 2-inch model For half the price of a new cutter, you can have a pack of replacement blades. The cutter I was using before was made by Westcott, but replacement blades were hard to find, and I didn't want to buy a whole new cutter every time the one I had I wasn't sure what I thought of the wire guide at first. I kept getting my sheets tangled up as I trudged my sheets along, but then I learned how to use it. It has become very difficult for me to get caught up with the wire anymore, and I like this feature more now that I am used to it. I like this wire because it's great for my eyes If you want to have 100% straight and precise cuts, do not rely on this method print cut guides on your material. It works for balling cuts but isn't perfect. The wire I have has not frayed or broken like the wires others have reported, but it has warped a bit after heavy use. The measuring arm is as follows Those swinging in the big top - A good arm measuring guide is nice to have. If I want to be sure that the dimensions of something are precise, I measure it and mark it first. It's the same idea as in woodworking The following are the steps to take when your eyes are rough It works great. The measuring guide on this is large and easy to use.

Speaking of my husband, he commented that this cutter felt left-handed. USE IT DOWNSIDE DOWN, because I am left-handed! I use it upside down because I'm a LEFTY! People who are southpaws get used to using items backwards or upside down automatically, and it becomes second nature to them. Then I flipped the cutter 180 degrees for him, and he said, "Okay, that's better. ". The following are reasons I gave four stars instead of five There is eventually a warping of the wire. * * 2. You sometimes have to hold the orange blade housing to keep it from flying out while There's no need to tighten the belt. Although it may be designed to fit loosely so that a replacement blade can easily be installed, it annoys me and slows me down when I'm in a good flow. 1. Note 3. You can move it around easily on a desk or table. My other cutters came with foam dots underneath, and I liked that. On the bottom I've stuck my own that I cut from craft foam. It is also possible to use a non-alcoholic beverage In the slipstream You can grip the cutter better with a mat underneath.

Everett Acevedo

| Jun 03, 2021

Not one of the most important marks 4, which is on the cutter, can be seen. A 25" circumference! Normally it would be located at the end of the cutter, but even the foldout arm doesn't This can't be used to make cards so I won't be able to use it. It's a major letdown! Among the other issues I have with this cutter the plastic isn't as sturdy as other cutters I have used before. When I use a blade, I prefer it to be on the edge so I can see what I am doing instead of between the plastic. A strong argument can be made to put the arm Consequently, the numbers are covered on both sides of my paper when I put it on it. My paper isn't even thick enough to tell which way to cut without lifting it up to see. I regret buying that.

Alijah BIBI

| Jun 30, 2021

In a nutshell My parents always had a paper trimmer when I was There was a big heavy guillotine attached to it. Because I don't have a dedicated office space in my apartment, I needed a tablet that could be carried around. It took me a long time to decide on this trimmer after going through many pages of trimmers. My preference for the brand is not just that it has an easily viewable wire that shows you exactly where to cut, but also that it has an easily viewable wire. There were a lot of other ones that didn't have that, so you don't know where you will cut. In addition to cutting coupons, pictures and documents, I intend to use this to do some basic photo editing. As far as my needs go, I find this one to be perfect for my needs. The paper clamps lift up, so you can easily slide papers in and out and have a place to hold so you don't smudge There is no learning curve to using this program. Cut the paper by inserting it where you want it to be cut, and sliding the blade across the paper. I find this to be exactly what I was looking for.

Jeremiah Lim

| May 24, 2021

The material must be of a high quality There's nothing solid about it, it's not even solid plastic and the bottom is hollow. As a way to give it more weight and make it stronger, I used thermocol. When you touch the material with your finger, it gets slightly oily, and you will notice smudge marks on it. That might be a good idea to keep 4. 5 out of 5

Price Cheapest paper cutter you will Therefore, it is impossible to ask for anything better. In practice, 5/5 As a paper trimmer, the only criterion for judging it is its ability to trim. As far as trimming blades go, they are okay. When it cuts, it leaves no rough edges for the most part, but sometimes it gets stuck to a sheet of paper or stock paper, and makes a rough, fuzzy edge. A hold mechanism does not always retain paper well. You need to consider both the holding mechanism and the trimmer when adjusting the position of the paper. You can use it to cut one piece of paper at a time. You only need to keep it to that, otherwise you will get into There are advertisements for more than five papers at a time, and it may be technically possible to trim four at a time It's not a good idea to load up 5 sheets at a time. A trimmer that will not be used heavy duty by any means. The scope serves more as a makeshift trimmer and can be used only for a few specific projects before being discarded.

Kaysen Thornton

| Nov 28, 2020

Toys like this are available for purchase. Coupons can be cut from the newspaper with it and other bits and pieces can be used at home. This is not the type of product you will see in an office or classroom. There is a print capacity of 7 sheets, but it can barely handle 4 sheets of 20 lb paper, or 3 sheets of 24 lb paper. The blade is a tiny piece of metal (maybe 2 mm) instead of handle size blades of Since you are dragging that piece of sharp metal along the length of paper, the paper starts pulling up on itself, leaving a jagged edge. There is also the problem of measuring when you are cutting near the edge of the ruler but the swing arm hinges out around 4 inches from the blade. Size 5 inches and up You should position your 8 exactly where it needs to be. It is best to cut the paper in half at the 5 " width.

Priscilla Flynn

| Nov 20, 2020