Guitar Fret Wire - Super-durable Stainless Steel Medium Gauge - Six Feet
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The fretboard of a guitar is typically fitted with frets, which are used at specific points during the scale's length to help generate notes when a string is pressed to them during chording. In addition to fret wire, we also sell fretboards that can be used for both construction of new instruments and repair work over time.
Steel wires such as these are stainless steel. I highly recommend them if you want an electric guitar. It is hard to work with them unless you are familiar with them or are going to have someone do it for you. If not, I would suggest the nickel and silver ones. A nickel and silver one will suit an acoustic guitar very well.
43080, if I recall correctly The numerical symbol for 80 FH is There is an image showing the product 43 CH. It appears to be 93 FY. The description says 43 CH, but the wording indicates This entails 80 feet of height
It is cut from a coil that has a diameter of about 22 inches, so it is approximately 11 inches long.
Selected User Reviews For Guitar Fret Wire - Super-durable Stainless Steel Medium Gauge - Six Feet
Nickels and emery are way more durable than nickels and emery One that is silver. There is no doubt that string bending is easier than bending wire. There is no easy wear and tear on them. Although I have no experience fretting guitar, I'm interested in the subject. However, I was certainly not afraid of learning new things. Since the tang on the stainless steel is too small for medium, medium/medium, and medium/high, the stainless steal may be difficult to use for medium, medium/high, and medium. Each of the other dimensions is 47 mm each of the others is In case of an imperfect fret channel, the 27nd fret will pop out at one or both ends. As a solution to this problem, I bought a C-shaped radius block to use on the fingerboard Then set up a clamp and use 1/4 of wood to protect the bottom of the fingerboard. 1 Prepare the fret wire, hammer it in and set 20-ply glue on it. You should apply Medium Super Glue on both sides of the fret after you have hammered it Remove any excess with a damp cloth. Use a C type clamp to hold the fret wire It needs to be clamped and allowed to As soon as the glue has dried, file away any excess glue. Make sure to do this with all of them if you Please do not be afraid of messing up the guitar, because I did the same thing before I gained It is an honor to do this work. I hope you have a good fretting time.
It is really hard and nice. When I bought these, I received the incorrect ones, but the seller sent me the correct ones and they were It should be easy to cut stainless steel with the right tools as long as you have the right ones. There is no doubt that the Jescar fret wire is great and hard, and it will last.
This was my first time fretting a guitar and I used stainless steel for the first time. A good play, a good feeling. The SS is probably a little tougher to work with than nickel steel, but I was still able to do it without much trouble. You'll have results you like and frets that last a long time if you take your time to do it.
My project worked well with this program.
I will certainly be getting more when I need it.
These frets are made of stainless steel and won't wear out, but they do wear out strings a little more, but I can deal with that. They make better distortion and clean tones,. but unlike nickel, they are very difficult to cut through if you try to cut them. C is going to supply stainless frets to me. Gitty is the only guitar I'm going to use from now on.
This product suits my needs perfectly because I am making a unique instrument.
The only complaint I have is that these are on the small side of a medium fret wire. Next time, I'll order a bigger wire.