Rev-A-Shelf 12" Wide 22" Deep Base Kitchen Cabinet 2 Tier Pull Out Wire Basket
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Drawer number one may be placed in either of two possible locations. The units are all of this type. I bought seven of them at the end of In my drawer, there are 10" between the bottom of the lower drawer and the bottom of the top drawer, as it is in most drawers. There are two sets of screw holes on the sides of the metal frame for the top drawer slides on this unit, but at the top there are none on it. The bottom drawer slides on one set are mounted 10" above the holes, the bottom slides on the other set are mounted 12" above the You would be able to have a clearance of 12". During the screwing process of installing the frame, you need to decide this. As far as the upper drawer is concerned, I prefer to have a bit more space
Shelves of this width are 14 inches wide in real life. The specifications state that it should be 8". Having a cabinet opening only of 14 inches is not feasible. If you have a shelf that is 5", then you cannot use it.
In short, yes. When secured to the back of the cabinet, the brackets on the back of the top slider provide stability. As you can see, I have mounted one side of the U-shaped Rev A Shelf with a 2 tier shelf Attached are the shaped bracket, the bottom bracket, and the back bracket. Everything seems to be stable at the moment.
Selected User Reviews For Rev-A-Shelf 12" Wide 22" Deep Base Kitchen Cabinet 2 Tier Pull Out Wire Basket
The kitchen inevitably became a mess after we moved into the condo. We went from a house with custom cabinets to a condo with builder's grade cabinets. It's not unusual for me to have pull-out base cabinets Pull them out of the Here in the base cabinets, there is a half shelf that is basically useless, and if you put anything on the back of the cabinet, it will be lost. A copy of Rev-A- will be sent to me Rolling shelf with two tiers I really like the pieces I chose for all the base cabinets. We really like that the baskets and frames are very sturdy and feel built to last. They are easy to assemble and install in wider cabinets as well, and they work great. The 18" and 15" openings are a great size. Since I am a little larger, I found that the 12 inch cabinets were a bit difficult, but I persevered. You might like to drill a little hook at the bottom and at the back of the frame for the screws. It would cost thousands to replace the cabinets, but installing the Rev-A-Shelf would cost only a few hundred It was so much less expensive and yet the shelves still made the kitchen more functional. I am still in my seventies and can still install them by myself even with arthritic hands, using only a small rechargable.
It took me an hour and a half to install them myself Part of the time was spent removing the unit from the island. The units were also simple The only tools you need to begin the threading of wood screws in the wood are a Phillips screwdriver and a drill. It's as easy as pie! The units are made of heavy-gauge steel and are well-constructed I made it. The doors fit perfectly within the cabinet and are firmly attached. Now that I have them, I am just blown away by how nice they look and how much more I can decorate my island with. plan on buying and installing several more sets in my kitchen cabinets in the near future. Reveal is one of my favorite toys Shelf space! This is the 15" second set of Rev-A-Heads I bought on 1/11/16 My kitchen cabinets need shelf units. Even though I loved the product as much as I did in my original review, I had some troubles when ordering it again. There is one U-shaped I had to disassemble the whole thing in order to return the bar because the holes were not threaded. I received a replacement immediately from Amazon I appreciate it very much! It was as good as ever. A replacement was sent but was missing a packet of screws - The customer service was outstanding. It was only 3 wood screws that I had to replace, so it only cost me 27 cents, but it was an annoyance none-the-less There are fewer. The next batch of these I want to get has fewer problems, so I hope that the next set is less problematic.
My purchase was made from Amazon Warehouse, where I received a substantial With that in mind, keep this review in mind. One of the baskets was ever so slightly off and would not stay on the rail. After assembling, I found that one of the baskets was literally falling apart. My order for another revision was therefore sent I purchased a shelf from Amazon Warehouse with the intention of returning the first one. I was amazed that box was still able to hold together at all it was in even worse shape than the first. Packaging materials are not included. There were a couple of missing screws and instructions (which I didn't mind since I had the instructions from the first order, and I needed longer screws for my installation), that probably fell out All the parts were twisted, but I was able to complete the first unit by using one basket, which wasn't bent. I tested it and it I will return all the defective parts from the two orders and keep the parts that are not defective. Hence, if you decide to order from the warehouse, be aware that it might prove to be a more adventurous process than you may have imagined. I love this device now that I have one working unit. Additionally, I ordered the pots and pans rack, and I find this to be a much more useful and organized addition to the existing cabinet. Their smooth sliding, and quiet operation, make them easy to use. This is much more budget-friendly than replacing cabinets with new ones. Getting the hardware for attaching the doors to the racks so that it all slides out together is next on my agenda.
We now have ball bearing slides with full extension, which allows you to reach things in the back of the cabinets without having to completely unload them and get on your The lower cabinet spaces in my kitchen will probably get these. This expensive upgrade will make your current cabinets look even better than they already are. The pots and pans kit and the shelf kit I purchased were both from this company. You should both check them out. If you are munchkin and can climb inside the cabinet to screw it to the back of the cabinet, it takes about 20 minutes to install, but then they invented magnetic screwdriver tips and cussing to make it easier. This product was very straightforward to install if you have basic mechanical know-how. The instructions, as always, must be followed that's why they are there. When you attempt to remove an interior shelf especially if it is built into the cabinet like mine, you will face the greatest challenge. In order to prevent destruction of your cabinet, it is necessary for you to have the know-how and skills. You need to consider everything carefully, think it through and measure twice before cutting.
A word of caution, however An installation should take no more than 30 minutes according to the instructions. If you've done it before (or if you have the right tools) it may be an easy sell The following tools are required shims, a square, drill, saw and To install the shelves, you will have to crawl into the back of the cabinet. Be sure to align the brackets perfectly square or they won't slide. I think you can do it, but you need some tools and to be handy. You can either screw the bracket into the side wall or, if you're like me and want to have enough space for the hinges, you can build a little extension between the bracket and the side of the cabinet so you can screw the thing into the side, bottom and My experience is that it takes more like 1 minute Each unit takes about half an hour.
Related Products For Rev-A-Shelf 12" Wide 22" Deep Base Kitchen Cabinet 2 Tier Pull Out Wire Basket
