Aluminum Diamond Plate Sheets - .025 (Thin) 4x10 - Bright Polished
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Neither I am a metalurgist nor have I heated or analyzed it using a gas spectrometer, but it seems like it's aluminum to me.
Cut off one inch of the other end of the aluminum diamond plate before bending it 1 inch from edge to 90 degrees. In the middle of a 2 inch strip, bend it 90 degrees.
It was at least 6 to 8 inches across when I last saw it. It was easy for the sheet to flatten out
As far as I know, I have not used it Since the plate is so light, I do not think that glueing it would be a problem. While the glue dries, it may be necessary to construct a jig to brace the plate on the wall.
Selected User Reviews For Aluminum Diamond Plate Sheets - .025 (Thin) 4x10 - Bright Polished
During a total garage remodel, I was in need of diamond plate backsplash and accents. I was very pleased with the packaging, and I unrolled it By drawing lines, cold chiseling (fairly gently) and placing my level under my knees on the line and working it into the 90 degree bend with my level and a hard rubber mallet, I made nice 90 degree corners for the backsplash and a lower cabinet corner. The item came out nearly perfect, and the price was great, despite the fact that I had to pay Rest of material will be used to detail walls. Wonderful product! I would recommend it to others.
My camper had a corner of the flatbed pass through the front of the camper after it was picked up by the tow company, so here is what I did to fix It came to me rolled in a box in perfect condition, and it was easy to work with.
If you want to dress up a sturdy subsurface and use this over it, then this diamond plate is the right product. Flexible enough to bend around curves, the housing can even bend at a 90-degree angle, yet the housing is Almost 2 decades ago, my golf cart sustained some dents over the years and I was quite happy to find this product to use.
Excellent product! I used it to detail and dress out my engine compartment without adding anything extra to the weight. I am available by phone at This diamond plate measures 125 mm in diameter. With good quality scissors, it cuts easily and bends and contours well. It is highly recommended to wear long sleeves and gloves when using this product due to its sharp edges.
Shipping was a bit expensive, but part of the reason was due to the size of the I was impressed with the strength of the box, and the way it was packed. A pair of sheet metal snips cut through the sheet metal. We used the rock shield to protect the front of our RV. A factory look was achieved with the use of RV roof chalking to seal around the perimeter. This is a product that I would recommend.
By the time I received it, the product was dented and creased in many places due to the thinness when rolled up for shipping.
It is a great value at this price. The metal on my gazebo had to be cut to fit so I could replace it. Excellent results! I am very happy with them! Mine was mounted down with the help of a rivet gun.
It was even faster than I expected! I am impressed with the quality of the product. It is only the packaging that is problematic. There were slight dents at the edges of the product when it arrived. Thank you for providing such a good service!.