Sydien 3mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector 4 Pcs
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
the securing screw of the hole of M5 is M3, and the diameter of the hole of M5 is 16 mm. Thank
Selected User Reviews For Sydien 3mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector 4 Pcs
The flange has "M3" holes but they will not accept M3 threads. It is not possible to tap them. Maybe the right size would be ideal A little over 2 and a little under 3. These holes are 5mm and 3mm in diameter They could be tapped yourself if you had the time. A drill bit capable of drilling a full 3mm seemed not to give me any problems. It turned out, however, that the hole pattern was a bit out of square when I tried to mount it! It was closer to 15 than 14. There is an overall difference of 7mm over a 16mm pattern. There were four options and I think I found one that will do for assembling the prototype, but we would have to source this part somewhere else if a kit was to be developed. Despite the fact that they tapped the holes along the 5mm shaft, the set screws still needed tightening. The fit is a bit loose, but they should still I see no problems with the set screws or grub screws. It is even possible to make sure the key can enter them by grinding the included hex key a little. It has a lot of burrs, but I could have seen that in the product photo and was expecting to remove them.
I was hoping to find flanged shaft collars for a 3/8 inch shaft, but without finding them at a reasonable price, I decided to purchase these and simply increase the bore size from 8 millimeters to 3/8 inches. I was able to do it on my drill press with no trouble. On the flanges, I increased the size of the mounting screw holes as well. My five minute project took the time it took to modify all four items in the specifications I required. When other sellers charge this much or more for just one piece, in our opinion, it's hard to go wrong with this set of 4.
The purpose of my purchase was to fabricate a specific item that I needed. This is a very good product. The perfect solution for my problem!.
Their appearance suggested that they were poorly made, but it was not so. I only have one complaint about these doors the set screws are too large.
The robot is driving.