YIHUA 959D-Digital Hot Air Rework Station, High Power with 3 Memories, Airflow Efficiency, °F /°C Display, Accurate Temp.(212°F~932°F), Brushed Aluminum Panel & Safety Features

The first thing I want to point out is that this is a solid unit that is going to last you a long time if used properly. In this case, the cooling process needs to be completed properly since the heating core gets extremely hot and needs to cool down before shutdown. Do NOT shut it off after each use if you want it to last for a long time. It must cool off first by putting it back in the cradle, and then it will self-cool for a few seconds before shutting off on its own when it is cool enough. Before turning off a computer, it is extremely important to allow it to self-cool first! The heating core will end up being burnt if you fail to do so. The pros are The internals of the unit are solid. It is clear that Yihua is upping its game There are three temperature settings to make everything easy to use. The control dial is smooth and the LED light is bright. This device is very compact and doesn't take up a lot of space. *Note that it heats up after a pause in sleep*Note An insulated protective sleeve covers the cable from the unit to the handle, but it does not protect it from burns. When setting the cable back to the cradle, I almost burned it a few times. In conclusion, it is not accurate to measure temperature at any one time as it can differ by over 30 degrees. It's hard to get a better deal than this for the price. You will find all the essentials you need for basic rework type tasks. Only an accurate temperature will make you want to spend a few hundred more on a rework station. At this price, it will be hard to compete with Yihua if they can nail down the temperature to just a few degrees off. So good they deserve to be praised.

Kaylee PARKES

| Nov 15, 2020

Having the ability to put the unit down and have it automatically cool off and shut down when not in use is very convenient. Work great so far, but four stars in light of the fact that I just received the product a few weeks ago and have not had a chance to test its longevity. This photo shows the dash on the display when it is resting and the unit isn't running. When you remove from the cradle, you can quickly reach the proper temperature.

Nyomi Quinn

| Feb 22, 2021

Other than that, it works There are no obvious weak electrical connections on the inside of the unit. It looks pretty robust internally. One of my complaints is that the nozzles are difficult to replace since they are only secured with a screw and a loose nut, both of which can lose their grip and roll away if you're In addition, there doesn't appear to be an easy way to replace the nozzles until the unit has cooled sufficiently to be handled.

Cyrus Graham

| Aug 23, 2020

The program did what it was supposed to do. The PS4 motherboard was able to be connected to a TV using an HDMI cable. While blowing 900 F air at a steady flow rate, the plastic housing of the tool burned and it melted. It is a good price for one time use, and it will work without a doubt for quite a while. To remove the melted parts, I will just continue to pull them out until there is nothing left to melt and burn or it is too small to hold.

Roy DICKINSON

| Nov 23, 2020

Honestly, what kind of joke are you playing with A copy of this is essential for you.

Tinsley Cole

| Jun 16, 2021

It has been really hot recently. Mat that is resistant to water. It's nowhere to be found, not even in the box. that the box I got was for the wrong product (it advertises it as the 2 in 1 It was a system where I only ordered the reflow station), but it had the right material curved tweezers looked like they had been used before, and the tweezers were open. I was surprised to find out that everything inside looked like it was thrown into a box without a lot of thought. What's most frustrating is that the heat resistant mat that I expected as advertised is a M size. Since I have not completed another project yet, I have to wait until I have finished the current project. In other words, it seems that everything is going fine. I will update the post as soon as I have tried it out. I'm interested in finding out why a part that was advertised.

Caspian Mann

| Feb 16, 2021

Building a harness can be made more convenient by having this on hand.

Kehlani Lara

| Jul 05, 2021

I really like it. A great feature of the preset buttons is that they can be customized. When the wand is in the cradle, it turns off. This product heats up quickly. Does make the led lights on my work bench flicker when turned on.

Joyce Avila

| Aug 06, 2020