3 inch Heavy Duty Casters Load 1500lbs,Lockable Bearing Caster Wheels with Brakes,Swivel Casters for Furniture and Workbench，Set of 4 (Free screws)
Score By Feature
OveReview Final Score
Questions & Answers
Generally, if the work bench weighs less than 1000 pounds, the casters should do just fine. However, depending on how the bench is constructed, the work bench may sag in the middle with only four
There is no indication as to where they are Evidently not made in the United States. China is most likely the culprit. The miter saw table that I use for cutting was fitted with them. Because of the limited space in my office, I wheel my saw out into the middle of the room and lock the wheels. My experience with these casters has been very positive, and I would gladly purchase
In fact, yes. Bolts will pull out more easily if they are in end grain on a post, but they function well regardless.
This is the second time I've purchased these, but I have not tested the load. According to the construction of these, they have a weight capacity of 250 lbs each, so a set of four is rated at 1000 lbs
Selected User Reviews For 3 inch Heavy Duty Casters Load 1500lbs,Lockable Bearing Caster Wheels with Brakes,Swivel Casters for Furniture and Workbench，Set of 4 (Free screws)
With the help of my 5 x 8 slab, I built a heavy work bench that holds all my woodworking tools, scrap lumber and my air compressor. I can wheel them around on each corner and the locks are very sturdy the bench is very stable as well. That will be corrected as soon as possible. It would have been more appropriate to purchase 6 of them and put 2 in the middle of the bench also.
There were heavy-duty casters on it as well, but because of their design, the unit was very easy to move. As a result of my previous experience with locking casters, I was hesitant to get these locking are sometimes tricky to lock, and really stubborn to unlock. ) These items do not fall into that category. I love how solid they lock, and how easy they unlock. There's a large lock on the front of the building It is just that much more convenient now that I can wear my sandals with the paddle. When they roll, they fall The urethane wheel is quiet (it's softer) so you won't hear any harsh noises - It is a great product for the price. I would highly recommend it.
It is even more remarkable that the box did not come open since they arrived during the Christmas rush. Often, casters come without mounting hardware, which is a complaint I hear. It does not matter to me whether these have hardware or not because they can't attach to thick wood so I really don't care. I have plenty of metric tools, but most of the tools are metric, and that's a nuisance for me. Because I store my fasteners mostly in SAE/English, metric fasteners don't work well for my My workshop assembly table was made from an old kitchen island that I picked up at a garage sale and added these casters to. Unlike some others I have, they lock and unlock more easily than others. However, that could also be a drawback. As I was hand planing some maple lumber, two of the four casters were locked and I was clamped to the table. In the process of taking a big cut (lots of pressure), I heard and felt When the casters were locked, the table was rolling in the direction that I was planing, so I am sure that was a factor, but I will make sure that in the future the casters are perpendicular or opposite the direction that is causing the table to roll.
The steel frame, ball bearings on the wheels and spindle, and tough, beefy poly wheels insure durability. It was found that one of the four had a distortion in the steel cup containing the ball bearings for the spindle, but the distortion should not affect the If Moogii had been available, I am sure it would have replaced it, but it would not be worth the hassle. glad I have a happy family. *Note I am not stressing these near their 1000-pound rating, but I really needed a set of beefy and strong casters and these were a great deal. A metric wrench is required for the caster bolts and nuts. I find that to be interesting There is no indication of where the product was manufactured. It would have been nice to be in the U. S.
The bottom line is that I would recommend these, and I would This is the second time I've bought them. Honestly, I enjoy them a lot! These are extremely well made, and have a ball-bearing design Using heavy gauge steel frames and mounting plates, the bearing construction is strong and durable. It appears that the wheels are made of hard polyurethane, and they don't feel cheap in any way. Casters can be easily swiveled, and they can handle a lot of weight. On a 3ft by 6ft workbench with a marble surface, four 4x4 legs, a shelf full of tools and hard wood, a cast iron lathe, and a sliding miter saw measuring 12 inches, I have them. There's not even a sweat on the casters' faces. All the weight (*500lbs/*225Kg) didn't seem to bother the STILL since it swiveled quite well. Using the double locking feature works perfectly, and it's strong enough to make roughing cuts on my wood lathe (vast amounts I recommend you buy them. This is a decision you will never regret. I don't have a chance of striking gold unless I'm lucky. The two visits took place one month.
My amp had no wheels and I love how easy it is to lock and move it and how smooth it is to move it. The wheels would have been nice if they came with screws to mount them to, but not a major problem as screws are available at any hardware store. The holes are rather large, so make sure you get washers or big screws to install them properly or you'll lose them.
Making a crafting cutting table out of two Ikea shelves, two heavy solid doors cut down to size, and these casters was pretty quick. In spite of the fabric, the chair is very heavy, and the casters make it easy to move around. As well as keeping it from moving even just a little bit even when locked, they are also very quiet It is normal for me to lock a maximum of two programs at a time. My wife uses a rotary cutter much of the time (which I use the most frequently) and when doing so I lean against the table and let downward pressure be applied to it. I felt very secure when the table stayed in place. At times, I hammer on top of it as well Seams can be flattened or snaps can be installed, etc. I have used the same application for several years now without any problems. I also like the smooth, easy way that the casters move when I move the table, and that they don't leave marks on the floor when I do. bolts included in the kit are too short, so I had to purchase longer bolts. All the bolts that come with the casters have a M8 thread size It is actually 8mm (metric 25) so that is what you will need My local hardware store couldn't offer me the same low prices that I could find on Amazon for MroMax brand 85mm bolts. I was able to use the nuts that came with the casters because I stuck with M8 bolts.
I would estimate the weight of these wheels to be about 200 pounds. Two of the four wheels in the cart developed flattening within the first two weeks of being built. I have used the cart several times a month from when it was built, and have moved it whenever I am in the shop, so it does not just sit in one place. It doesn't change the fact that the cart is still functional (and it hasn't gotten any worse in the months since it occurred), but it is annoying to push through the 'bumps'. Their easy installation and sturdy locking mechanism makes them a great choice for business use. Would it be possible that I have a couple of.
Related Products For 3 inch Heavy Duty Casters Load 1500lbs,Lockable Bearing Caster Wheels with Brakes,Swivel Casters for Furniture and Workbench，Set of 4 (Free screws)
