Genteq Capacitor Round 35/5 MFD 440 Volt 97F9848 (Replaces GE Z97F9899 / 97F9899)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no difference between the new CPT00977 and the earlier CPT00977. Only the part number has been changed. The capacitor you have selected should be the correct one The Trane staff will usually answer your questions if you call, but their sales team cannot help you unless you are a contractor.
YouTube is a good place to start. There is a lot of information. In order to discharge the electric current, you must use an insulated screwdriver. Replacing them is a very simple process and will save you plenty of money, but remember to stay safe.
I used this on a Trane heat pump and it worked fine. In my opinion, the variance is slightly higher on it In this case, the "5" stands for plus/minus The following amounts are in percentages 5%-50% As compared to It was instructed that you buy 3%. It's not that I know a lot - just enough to be dangerous Its a bit more difficult to determine why you need 3% when the average house current varies by 10% between 110v and 120v, so I honestly don't know. Years ago, I replaced the Trane capacitor that would not charge, the system is operating fine since then It's much more cost-effective to have a quick and cheap fix than to pay a repairman a couple hundred dollars.
Selected User Reviews For Genteq Capacitor Round 35/5 MFD 440 Volt 97F9848 (Replaces GE Z97F9899 / 97F9899)
The installation is very straightforward. The photo shows Originally fitted with a capacitor. Although I didn't take a pic of the new one, it looks the same, but is slightly taller and has the same diameter as the It has been working like a champ for me since 2005 when I installed the Kenmore compressor. After receiving the signal from the power switch, the unit got hot to touch, and the fan did not turn on. With the help of a stick, I was able to turn the fan, and the cooling started to work. In the past, I knew the dual run capacitor had failed or was about to fail. There was an HD PRCFD355A 35+5 mfd * 5% 440/370 VAC 60/50 HZ Rated to 70oC dual run capacitor inside the unit. It was easy to replace the Genteq/CapCom/GE replacement! The Titan by Packard is approximately one inch taller, but about two inches wider A large quantity of spade connectors fit inside of the unit, and there was enough clearance for the larger size.
As expected, the breaker was plugged in and the system started right up. We're back to being chilly in the house. I'm happy to see Amazon doing well It arrived at my house by 8pm, after ordering around 4pm It is well worth the time and effort at 30pm - There is no need to go to the HVAC store where they hate all consumers, and there is no shipping cost. In all seriousness, I'll be thrilled with this thing as long as it doesn't die in 16 years. The compressor will be made by The Kenmore washer by ICP (International Comfort Products) has the following model number The part number is N2A324AKA200
If you have 1186257 or 1172297, please let me know. This capacitor runs in dual mode and is for use in multiple applications. A 14-dollar bill.
A friend of mine with a background in HVAC suggested that I buy this capacitor in the hopes that it would fix the problem with my A/C By pulling the old capacitor out of my C/A unit and comparing the part number to this one, I was able to identify this capacitor as the genuine article. It was then possible for me to determine if the remaining numbers line up. In light of my absolute lack of HVAC skills or experience, I used my phone's camera to take a picture of the old unit with its connections intact before tearing it off. Whenever I install this new one I will be able to refer to it. I was able to do this with ease! One or two of the connections with the old one were somewhat corroded, so all I needed was a pliers to remove them. This unit was much easier to buy and replace myself than I had expected, and it cost me less than $60 to have my HVAC company come out and do it for me. Because all the HVAC/Plumbing supply houses in my area will only sell to licensed contractors, ordering it online was my only option. It was so convenient that I could order all of these online and replace them myself for a reasonable price! I was also surprised at how fast it arrived!.
There is no need to worry if you plan to buy this as a replacement for the 97F9899, as this is a newer Although it is thinner, it is still strong. This one is 2 1/8 inches in diameter, compared to the 2 1/2 diameter of the original. With this version, I used a scrap piece of PVC trim I had lying around to create a small shim that makes the original bracket work. Here you can see the drawing I made to get the right thickness, I used about 8 inches from the thickest part of the shim.
There is no cooling when I turn on my A/C. When I noticed the outside fan wasn't going on, I turned it I researched my capacitor on Youtube and it turned out to be I received the new one the next day after ordering it. It was easy to install and was successful! My estimate is that if I had called for service, it would have cost me 200 or more. There are many informative videos on YouTube showing how to diagnose and replace this capacitor. I was able to fix it with little cost. The process is pretty straightforward and can be done by.
You shouldn't be scared to fix ac issues on your own before calling a professional. There were YouTube videos that walked me through the entire process, and the unit wasn't spinning the fan yet, but it When I bought a multimeter to measure capacitance, it pointed out that there was When the price was right, it was a no-brainer to try it. It burst into life. Make sure the configuration was perfect. Unlike the one it replaced, this model was thinner and longer, but all the specs were the same. You have saved 200 dollars.
As far as I can tell, everything is going well! The capacitor appears to be the cause of our air conditioner's failure to cool. I'm glad I did some research on why it stopped working. I chose "expedited" shipping and it arrived two days after I ordered it. We have been using this Trane unit in the south east for the past 9 summers. When the time came, we turned on our a/c after leaving it off during the day. At dusk, we turned it on, kicked-off the fans and then went to bed. By providing it with an assisted spin with a long object, the fan had been started, and the upstairs had been cooled. The one we have here is a new version of the old GE, and as others have mentioned, it is longer and narrower than the old one. using adhesive Velcro to hold the new one in place (an idea I got from another Amazon reviewer!.
It was one of the cheapest prices although I hesitated for a long time before buying it, but I am glad I did buy it. Murphy's law dictates that I had to have it so fast because the air conditioner was not working in the hottest days of summer. Anyway, installation is easier than I expected, only drawback is that it can be difficult to work into its location given that it is thinner than I had anticipated and there are no straps to hold it in place. I did not want it hanging from the cables for safety reasons. Plastic piece was cut out and made into a washer to hold things in place instead of just screwing into the plastic itself. In my opinion they should offer a sizing kit and charge a couple of extra dollars for it and I would have gladly paid After almost one hour of trying to get it to fit correctly, I gave up. Unfortunately I could not take a pic for you guys, as the air conditioner has now been closed. Sorry for not reopening the business.
Related Products For Genteq Capacitor Round 35/5 MFD 440 Volt 97F9848 (Replaces GE Z97F9899 / 97F9899)
