Leviton 10083-M Electrolier 1-Circuit Lamp Holder, 250 W, Incandescent, Medium, Phenolic Body, Aluminum Shell, Contractor Pack, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no way to explain how they got It is about 5 inches. The dimensions. The one I hold now has been replaced (I had replaced three Two screw-in sockets with singles) and my measured dimensions are as follows The width is 1 3/4 inches. This is the height of 2 inches. The knob will measure 1 and 1/16 in from the back to end tip. The diameter of each beam is 30 inches. It might help if you read this.
Despite being able to unscrew the plastic knob, there is still a rod sticking out of the back. Using heavy duty wire cutters, I cut the wire off of the three that I purchased. Getting it flush is a challenge - I broke one of the three when I was cutting it. However, this seems to be the only option I could find for replacing a socket for a low cost.
It is true. This switch has been installed in two lamps I have been using LED bulbs in for over a year without a problem.
The answer is still a mystery to me. In order to install the new light socket, the old wires were removed from the broken socket and replaced.
Selected User Reviews For Leviton 10083-M Electrolier 1-Circuit Lamp Holder, 250 W, Incandescent, Medium, Phenolic Body, Aluminum Shell, Contractor Pack, Black
A trusted electrical component manufacturer, Leviton can be relied upon. This part was very easy to install and is very convenient. It corrected my "On-Off" problem Neither of the floor lamps in my house have an "off" switch. I no longer needed the originals as I converted my household to LED lights. The originals were designed for 3-way bulbs, but I no longer have the need for that. It seemed that they were not as robust as the original units they replaced, but any product is no longer as good as that? It is unknown how long these lamps will last, but they are inexpensive and easy to replace to repair expensive.
Install one of these in a lamp with three filaments The way to the south. When we first noticed that it would go out at different times, we thought it was defective. A second one arrived (I recall the delivery date) and was the same. The problem has been corrected, and there is no longer any problem. There are a couple more lamps to be converted from 3-watt There are several ways to make single-throw.
It is an old and reasonably expensive floor lamp that has a broken switch. I was a little concerned about taking apart the lamp (and putting it back together), but I was able to install the new switch without too much difficulty. As a result, I was able to screw in the original on/off knob of the lamp in the new switch, restoring its appearance as it did With this switch I hope to get many years of use, but without a crystal ball (can I buy one from 2) I have no idea.
Replaced the faulty switch in the lamp that I purchased on Amazon two I found that replacing the switch to be a much more economical alternative to buying a.
I am glad I replaced my previous one with this Turn the way lamp switch on and off. The installation process is easy. It was hard to get enough slack in the cord to make the connections by pulling it through the lamp leg.
There was a three-light lamp on a cheap lamp I bought Turn the switch one way or the other. Three is my least favorite number The switch has a two-way movement. Using this to replace it, I can now get cheap bulbs that work properly.
I used this switch as a replacement for a defective one. I would prefer the "On" position to be wider. The following is my meaning. When you turn the dial, you must be careful not to pass the "on". This will result in you having to rotate all the way back I thought the switch was great except for that one issue.
I used this for a year and it was just fine. However, we recently smelled an electrical burning odor from this socket and traced it to it. The turn handle began to melt because the temperature had gotten so hot. I was fortunate that it didn't catch.