6 Pieces 12 mm Latching Push Button Switches Round Waterproof Push Button Switches 12 V ON and Off Waterproof Metal Switches with 6 Pieces Wire Plugs and Blue LED Compatible with Car Auto RV (Black)

6 Pieces 12 mm Latching Push Button Switches Round Waterproof Push Button Switches 12 V ON and Off Waterproof Metal Switches with 6 Pieces Wire Plugs and Blue LED Compatible with Car Auto RV (Black)

$ 12.99

Score By Feature

Based on 47 ratings

Delivery

9.05

Satisfaction

9.37

Value for money

9.29

Packaging

9.36

OveReview Final Score

How Our Score Is Calculated

Product Description

Press the switch to turn it on, release it to keep the power on, and press the button again to turn it off. Since SPST is not instant, the working time can be adjusted manually during use.

The hole size of the panel mounting hole is 12 mm, and the panel mounting hole is Button is 5 mm in diameter, a round button with a power symbol, measures about 15 mm in height. It measures approximately 8 mm wide It is equipped with different colored wire connecting wires measuring approximately 20 mm long. It is 150 mm in length, and you can cut it to your desired length to meet your needs, it is enough to meet the needs of daily living.

It contains 6 pieces waterproof sealed push button switches with 12 Volt blue LED lights, 6 wire plugs of different colors, which allow for easy wiring and connection, green wires for switch to control, and red and black wires for LED to control (LED doesn't distinguish positive from negative voltage).

It is extremely easy to install round latching switch with screw clamp type terminals makes installation very easy, four pins, multi-type wire connections make it very simple and easy to install

The 12 V push button switch is widely applicable for motorized vehicles for motor starting, power starting devices, and it also can be used as an access control button, in LED circuits, and on car, RV, boat, marine, auto, truck, coffee machine, industrial machines and medical equipment.

Questions & Answers

How can I remove the resister so that the led can be powered with 6v without the resister present?

Wires and a switch are all that's needed, no resister. There is no way I can tell if it works with the 6 volt power supply

On the photos, the light shows that a "LED only illuminates when the switch is turned on", however i am not able to get that to work. Do you know how to do it?

This will enable the led to illuminate when the switch is on when the + white wire is connected to the + output on the switch.

A positive wire was connected to the red wire on the switch, and a negative wire was connected to the black wire on the In the green wires, what do you connect them ?

Wires connected to the green terminal are connected to the switch.

What kind of stainless steel do the silver ones have?

My purchase is motivated by the fact that they are stainless and waterproof, which I took into account when making the purchase. Still haven't had a chance to use them!

Selected User Reviews For 6 Pieces 12 mm Latching Push Button Switches Round Waterproof Push Button Switches 12 V ON and Off Waterproof Metal Switches with 6 Pieces Wire Plugs and Blue LED Compatible with Car Auto RV (Black)

I like the product

5/5

It is well made, attractive, and of a good quality. While the device does not run without figuring out the wiring schematic, it is confusing until you figure it out. You will connect the input power to one of the green wires, and the switched output to the other green wire. For ground, connect your power source to the (-) pole. Connect the (+) lead to either the input power or the switched power, depending on whether the LED should be continually on or only when the switch is turned.

Adley Levy

| Mar 25, 2021

Switches with a fine level of detail

3/5

Despite replacement of all the toggle switches on my trike with these switches, one of them got stuck in on position after just two hours and needed to be replaced. This sort of plug is light duty and is not meant for higher amp applications. It might have fumbled inside. As a precaution, I will keep one extra pack on hand now, but I also plan to look for higher amp rated ones.

Blaire Friedman

| Oct 25, 2020

We did not receive Despite the absence of wiring instructions, I would rate this product 5 stars

4/5

It seems pretty simple, but even in the off position, there must be some electrical current getting to the lights, which would explain why they have a It was only one night that I noticed it.
We are still trying to figure out how to fix it.