LM YN 2-Channel Motor Forward Reverse Relay Control Module AC DC 12V 24V (7V-27V) 30A 0.1s to 999 min Adjustable Digital Display Suitable for Control of 2-Way Solenoid Valve Pumps Motors Lights
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The voltage at which the module works is This means 7V. A 27V battery. Efforts that can be made to control loads include The max current is 30A for either 120V or 240V
The answer is yes.
Listed within the description are the instructions for programming.
We are here to help you if you need it. View the diagram below for a closer look at the product wiring. The following functions are listed in alphabetical order With the relay 1 pulling to the A time to automatically stop the signal 1 at signal 1 With the signal 2, the relay 2 will automatically stop after the time has passed for the B The signal 3 is the reset signal for emergency stops With the relay 1 pulling to the A time to automatically stop the signal 1 at signal 1 In this function, the time unit must be consistent between the signal to start the vacuum to the start to the suction time to the stop time (Relay 2 must be timed from signal to start delay B.) In the wake of a power failure With the relays 1 and 2, the relay 1 is pulled to the A time to release, according to the C time, and the relay 2 is pulled to the B time to release, according to C time with the relays 1 and 2, it works alternately in an I would appreciate any feedback you might have. In case of signal 1, relay 1 be pulled As a signal 2 (limit) is received, relay 1 stops and starts timing to A time relay 2 is pulled During signal 3 (limit), relay 2 stops, and relay 1 pulls at the same time to time it with signal 3 A loop that never ends In case of signal 1, relay 1 be pulled As a signal 2 (limit) is received, relay 1 stops and starts timing to A time relay 2 is pulled The relay 2 stops when signal 3 (limit) is received The signal to be given is 1 again *P- In case of signal 1, relay 1 be pulled The relay 1 stops when signal 2 (limit) is received Next, pull the relay 2 at signal 1, and then the signal 2 at reel 2 As soon as the signal 3 (limit) is received, the relay 2 switches off
Selected User Reviews For LM YN 2-Channel Motor Forward Reverse Relay Control Module AC DC 12V 24V (7V-27V) 30A 0.1s to 999 min Adjustable Digital Display Suitable for Control of 2-Way Solenoid Valve Pumps Motors Lights
I would recommend better documentation, as the product is well built. HOW LARGE IS THE AVAILABLE VOLAGE ON IN ONE How many relays does it take to control a relay? Well, here's the deal with voltmeters and inputs you can figure it out pretty easily.
Then, you can use Zwave mimo + 2 to flip the inputs at N1-N2. It's great that the timers work for each relay, and I really like this N3 input as it's used as a limiter for the relay. I like the way this was built. It works well, but there should be better instructions for how it works.