CZH-LABS Slim Right Angle D'sub Header Breakout Board, Terminal Block DSUB Connector Module (DB15 Female)

This product works well and has a very reasonable price. Because my company was taking a long time to purchase the ones I originally ordered (procurement issues), I bought a few of these. Upon delivery, they were in good condition. Although they are designed well, you will need some standoffs to keep them from touching the surface of what you intend to mount As long as you use equipment like this, this shouldn't be a huge problem, since you probably already know how to get (or have) standoffs. There are soldered pins sticking out from the bottom of the board that connect the connector and the terminal strips, and they short out on anything of a conductive It will be necessary to use a tiny screwdriver for clamping, but you likely already have one. In contrast to similar products that usually have four mounting holes, this monitor only has three. Nevertheless, they placed two of them on the end of the connector, meaning the bulk of the support will be placed on the end getting the greatest amount of This was a very clever plan. There are no apparent structural weaknesses of the units, and they are electrically connected. Having a side connector will help to relieve vertical clearance issues, but you'll need to have access from the side to the bulky connector that is mated to According to my observation, the metal quality is decent, and it is The devices will be used in a development lab, so there will be no harsh environmental effects. These will be more than enough for me, if I need more. There is no reason I can think of not doing so.

Maggie Shaw

| Jun 15, 2021

It would be nice if the metal portion of the connector were attached to the rest of the unit, but unfortunately, it is not. The screws must be removed in order to take the case So I could use it on a device with an appropriate mating connector, I used super glue.

Zyaire TURNBULL

| Jul 08, 2021

The traces are clean and the solder joints are good. It plugs in smoothly into the port, so its dimensions are satisfactory as well. A few of these boards seem to have minor problems like a connection problem, but this one does seem to be a pretty good one.

Annalise Dennis

| Feb 14, 2021

In my case, this was used to adapt a pipe organ pedal switch assembly to be connected via a standard 37-pin jack The cable has four pins. This board fit into a small space thanks to its compact design, and going through the easy wiring process was simple because of the clear labels on the.

Joseph Carpenter

| Sep 19, 2020

The switch worked perfectly. I used it to change the board on my 3D printer easily. I used a cable to connect the inputs from the printer and made a label to identify the pins that should be connected to the board's outputs. The product was very good. I would definitely buy it.

Kaden Durham

| Mar 26, 2021

It is not properly fastened to the metal shield. The connector works fine but the metal portion is attached by the female screw on the D connector, which can be a bit bothersome. You will not be able to attach the metal portion of the screw if you need to remove the female screw because there is a screw installed in the connector you are plugging into.

Journey HODGSON

| Aug 01, 2021

The little product is great, and I saved myself a lot of soldering time.

Banks Carroll

| Jan 29, 2021

It works well for a breakout board. Thanks to the provided pinnout and datasheet online, it is very easy to upgrade. Everything has so far worked perfectly. The type of connector would be recommended to anyone who is looking for one. You get tired of soldering after a while.

Kole Wong

| Nov 04, 2020