Creality Upgraded CR-Scan 01 3D Scanner, Handheld/Auto scan Mode, No Marker Quick Scanning, 0.1mm Accuracy, 0.3-2m Scanning Range, 0.2mm Resolution, Professional Color 3D-Scanner for 3D Printer
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You must follow these instructions in order to use the turntable mode I.A. *br>. To preview, click "Preview". With the viewing angle adjusted, click "Preview.". At a distance of 600 to 800 millimeters, the scanner should be situated next to the turntable It is 800 mm long. Make sure that the turntable and model are visible on the screen by rotating the scanner. If there is a red point on the screen, reduce the brightness until there is none. 1. 2. 3. Set the turntable to its initial state. Use the "Initialize" button to adjust the angle of the turntable so that it is red on the entire surface. The fourth point. It will automatically rotate and scan as soon as you click "Start.". If you want to change the pose, you can do so once more after scanning.
It's not difficult to do, just follow the guide or watch the video on Youtube. I.A. *br>. Make sure the antitheft device is closed Make sure you install anti-virus software before installing the software, or else it could cause a problem with the installation of the drivers and result in a A calib file stored on the U disk will need to be uploaded after the installation is complete. 1. 2. 3. As soon as you start scanning in handheld mode, the countdown will be 10 seconds. You must fix the field of view on the object to be scanned during this time. The fourth point. To see the data again, return to any scan position that you have scanned before, following the instructions in Make sure you are scanning clockwise from top to bottom at a constant speed.
To set up the software and transition to turntable mode, follow these instructions 1. Wire the equipment according to the instructions. 2. Set up the software as indicated. You can preview the preview by clicking here Make sure you have the scanning angle of view adjusted You will need to click "Initialize" to begin scanning (See note below) Now is not the right time to rotate the turntable) The scanned item needs to be placed in the CSV file, and then pressed It is only at this time that the turntable will rotate)Note You will need to turn on the turntable switch and adjust the speed control knob clockwise.
The video on the teaching can be viewed.
Selected User Reviews For Creality Upgraded CR-Scan 01 3D Scanner, Handheld/Auto scan Mode, No Marker Quick Scanning, 0.1mm Accuracy, 0.3-2m Scanning Range, 0.2mm Resolution, Professional Color 3D-Scanner for 3D Printer
My hair was getting in the way of the scanner at first. During the first three scanning sessions, I was able to get a good scan of my whole face. As a result, I had to dye my hair green so the CR Scan would detect it Tracking could still be possible in 01 still. It is obvious that I didn't dye my hair before I took this picture. It is a good resolution, and as long as you are still, and don't rescan a lot of areas, the scan is excellent. Once I learned the software, doing a scan wasn't difficult. It took a little bit of time, but once I got the hang of it, I got the hang of it easily. In terms of small objects, the turn table is not very good, but it helps with scanning. There are some instructions for the scanner's turntable that need improvement, but it only takes me 10 minutes now to scan a little object. A scanner can create a good model when the item is reoriented so it can see into all crevices. In the software, the point clouds will be aligned and a single STL will be made by smoothing them together. It is a good looking unit and I'm happy with its quality. There is one thing that you notice immediately when you look at this cable its short Larger objects like people or furniture tend to be hard to scan as the scanner does not have as much range.
This product comes with rotten documentation and confusing software to control it as well as incomprehensible error messages, which is what makes the product so awful.