Micro-Mark Softback Polishing Sticks
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Not guitar frets, but I've made a lot of metal gleam like a mirror, so I'm confident they'd work.
Outside there's grit, and inside there's a hard foamy core.
These are intended for the fine finishing of soft materials such as plastic. Theoretically, they could be used to sharpen a knife. if you were willing to put in years of effort. I wouldn't even use them to put a fine edge on a piece of paper because it would take too long.
It appears to be functional. Clay is porous and may require filling in order to perform well. To achieve a smooth surface, apply a coat of clear sealer.
Selected User Reviews For Micro-Mark Softback Polishing Sticks
They make sanding nubs a joy and a breeze. I really hope Amazon doesn't stop selling these.
These have been excellent and have withstood hours of daily use admirably. I don't think there's much more I can say about how well these work than what others have already said, but I have run into a few issues, mostly with maintaining their abrasive properties and some delamination. br>br>For starters, the higher grit levels (3k, 5k, and 7k) appear to have quickly lost their abrasiveness. To keep track of how well each stick is holding up, I've been using the same side of each stick exclusively, and the higher grits all appear to have gone smooth very quickly (I know, they were all smooth to begin with, but it's obvious that one side has become glossier than the other and the un-glossy side has become un-glossy side has become un-glossy side has become un-glossy side has become un-glossy side has The result is better when the used side is used). As a result, these sticks have become nearly useless, serving only as a stop between the lower grits and a different polishing stick to smooth out the part after low-grit polishing. sanding with different grits These three sticks also feel much more rigid than the others, for whatever reason. They're all made of hard plastic with a thin layer of foam between the plastic and the sanding surface, and these high-quality sanding blocks are available in a variety of colors. There appears to be no foam in the middle of all grit sticks. br>br>The other issue is overall durability, which is where they lose points in my opinion. I try to keep the sanding surfaces clean by wiping away the dust with a drop or two of water, but this has caused a few of the sticks to delaminate, with wrinkles forming in the sanding surface on the better cases and the edges peeling off in the worst cases. These are beginning to lose their abrasiveness as well, but not to the same degree as the high-abrasive ones. grit sticks are a type of grit. br>br>To be honest, I think they're pretty good, and they've helped me get some great results. Because the price is a little high for something that wears out so quickly, I may look for other options, but for now they're working fine.
Models of Gundam are being nubbed. Here are some helpful hints for making the most of them:
1. Shave the nub with a razor-sharp blade (like a new X-acto knife). acto).
2. Start with the coarsest grit and work your way up to the finer grits (obvious, I know).
3. Rub the part with your thumb or finger to restore the part's original shine after buffing with the highest/finest grit. br>4. If the stress marks persist, dab a TINY dot of Tamiya extra-fine sanding compound on them. cement with a thin layer Touching the part will cause the cement to react with the plastic, causing it to "re-emerge. " "Restore normalcy" to the plastic that has been stressed. br>br>I hope this information is useful. When I'm building, I keep these next to my nippers on my desk. The investment was well worth it.
The tools are fantastic. br>It's ridiculously simple to polish down nibs, mold lines, and scratches. br>If you're making a model of any kind - Gunpla, Warhammer, Model Cars, and other similar toys will quickly elevate your work to the next level. Simply go through the entire grit range on the surface without skipping any grits, and you'll be blown away. br>br>If you're going to use these, make sure they're wet sanded. You don't need to dunk these in cups of water; just a little water will suffice. A few drops on the sanding surface will suffice. These are straightforward and of good quality. br>br> br>Want to extend the life of these? Invest in a low-cost toothbrush and clean it after each use.
Although these sanding sticks aren't as flexible as sponges, they make up for it by being extremely effective. Even the most stubborn nub marks were easily flattened out. br>br>Getting the technique down takes a little practice, especially when working on rounded parts, and if you're not careful, they can remove a little too much plastic. Regardless, I haven't had a better experience cleaning nub marks and mound lines with any other product. br>br>If you're a model maker or a hobbyist, you'll want to add these to your toolkit.
The grits are well spaced out. It was simple to sand/polish metals and hard polymers. The outcomes pleased me greatly. They could be stiffer, in my opinion. The boards flex a little more than I'd like, but they still do the job.
The grit on these sticks is extremely consistent and fine, making it simple to quickly remove only what you need. Controlling it is a breeze.
This set will be used to smooth the polymer and give it a nice finish.
Related Products For Micro-Mark Softback Polishing Sticks
