10 Pack Heavy Duty Double Prong Coat Hooks Wall Mounted with 20 Screws Retro Double Robe Hooks Utility Hooks for Coat, Scarf, Bag, Towel, Key, Cap, Cup, Hat (Black)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Using 1 X 4 inch pine boards I mounted my coat hooks on the wall. A hole was made into the wall using studs that were found on the 1 X 4 inch board. Each stud is 16 inches beneath the drywall. To locate studs and the center of their shape, there are some really good YouTube videos. You may measure the center of your board and make sure that 8 inches away from the ground two-thirds of the way up from the top, both right and left, is where to put the two holes. Using a 2 and 1/2 inch wood screw, I curved the pine's holes the same thickness as the screw's shank to prevent the woodboard from splitting. Using a level, level the pine board to ensure that it stays securely in place while moving. A nail will mark both of the holes in the drywall. The screw is aimed directly at the wood, so after drilling one-sixth the width of each stud, cut it and you can attach it to the stud. A two and a half inch #8 screw would work. As a result of this, you get a structural installation.
As I have made the screws into the wood, it is not recommended to put them directly on the wall since they may fall down or damage the walls that are dry.
I can tell you that these coat hooks are non-corrodes and do not rust.
An inch exactly, 1/16 inch.
Selected User Reviews For 10 Pack Heavy Duty Double Prong Coat Hooks Wall Mounted with 20 Screws Retro Double Robe Hooks Utility Hooks for Coat, Scarf, Bag, Towel, Key, Cap, Cup, Hat (Black)
Having three of these in my entry way to store my keys, sunglasses, purse, ects super secure, I put three of these in my entry way to hold keys, purses, sunglasses. Their coats would be a risk with a large coat; because they hung them from drywall after we screwed them.
The result is hand towels that uy some hand towels with a loop and voila! I am also glad to have extra supplies for other projects. Pre-processing had given us no problems with the screws, though we did experience some slight issues with the screws. As with the screws, these holes are drilled and easy to secure ( as we usually do). Although all of the screws were painted, there was no chipping in the oil after being powered down.
I really like these guys. My bathrooms had no hooks or towel racks for the hooks or hooks from my shower. One night, while looking for some spare boards, I purchased these hooks and made my own row. The first I ever owned a franchise was with them. My bathtub sheets are not dropping and looking great, the quality of the towels is fantastic. As a result, the install was quick and easy. It was a nightmare installing them from the previous purchase. With only close fitting hooks, you would get an unpleasant snap. There was no problem with these. Their joints seemed to have been nailed right into the board for the first few hours.
In the sense of a critical piece of info if you'd like to place the hooks in order if you're constructing a coat rack, you can use my rudimentary measurements for the holes themselves. The Amazon link doesn't seem to be there so I decided to give this 4 stars. I've not seen the quality nor does it seem as if they have an original.
This is what I got for installing new six panel interiors throughout my house while I installed new six panel doors. It has a sturdy metal frame, so it looks great. Although I only noticed the small screws I did not have trouble with them. It was done in advance. Put screws to the doors that have been drilled beforehand. Even with the hollow core doors, they're extremely sturdy. Strong enough to carry towels or coats of liquid. A solid wood enclosure of these items could likely hold many pounds.
Installation is possible with screws, wood or heavy duty hardware such as wallboard frames.
hook itself are quite useful. In my experience, the screws that come with each hook aren't as good as the ones I found elsewhere. To remove them (using only those screws), I used one snapped strip per set. They started being pulled out as soon as they were replaced. Reassemble the damaged ones by hand, and gently repair the break. While preparing to paint the heads in black, the head got a bit muddy after removing some wood screws from my bench, so used some drywall anchors and more 3rd party screws to fix that. After drying them, painted them black. There isn't too much material in the hooks themselves; they aren't heavy and would not bite into plywood, nor will they work anchors from drywall, but I found the hooks solid and attractive, and not inexpensive that you couldn't beat using the hook with your own hardware.
Your kind words are appreciated!! There's no better way to enjoy these new hooks than giving them a rave review. This product looks great, is easy to install, and has great quality. love it! It was made clear to me through read the reviews before purchasing that screws should not remain longer than the recommended length. These guys are making the right choice. Whenever I wanted to buy a piece of wood, I always chose wood for its moisture absorption and tight-lipped construction. The truth is, seriously. A great value was achieved with this product.
Related Products For 10 Pack Heavy Duty Double Prong Coat Hooks Wall Mounted with 20 Screws Retro Double Robe Hooks Utility Hooks for Coat, Scarf, Bag, Towel, Key, Cap, Cup, Hat (Black)
