Air King 9020 1/6 HP Industrial Grade Wall Mount Fan, 20-Inch,Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I'm here! If this fan is mounted to the ceiling or wall, then it can be installed. Both types of installation can be accomplished using the provided bracket. One thing that is missing is the three lag bolts that need to be purchased to secure the fan, but the instruction booklet indicates how many you need. There were two of them, and I believe they were 5/16" in diameter, I think? It will be a pleasure to have this fan in your home. Best of luck.
This is perfect. Using this is what I do. Moving a lot of air can be loud, but that is not the only cause of the sound. You should check it out. The product is excellent and I would purchase it again. I really enjoy your fan page. Probably fifteen by fifteen feet is the size of our home gym
In short, yes. When you mount the triangular fan mount to a vertical member, like a barn post (using 5/16" or 3/8" lag screws 5" long), the upswept blades will look as if they are on a pedestal Control for the down axis is accomplished with two large thumbscrews located either side of the semi-rotor It is mounted on a circular ring. Pivoting the fan from left to right The left is adjusted by a heavy bolt, the right is adjusted by a light bolt To rotate the fan in the right direction, loosen one bolt, rotate the fan from left to right, and then re-install Make sure the bolt is tight.
If you want to mount in a corner, you'll likely need more depth than the bracket provides. It worked well for me to move two of these units about 3 feet from the corner where I installed them. Despite the fact that a bracket and top hanger bolt are included, you will need your own hardware to affix the device to the wall.
Selected User Reviews For Air King 9020 1/6 HP Industrial Grade Wall Mount Fan, 20-Inch,Black
I spent a few days researching the best fan for our home. It will be possible to fit this fan under our small overhang. It was more cost-effective to get one large fan rather than two smaller ones. I was amazed at how easy it was My wife and I went to the hardware store and bought heavy-duty concrete anchor bolts for the stucco side of our Since the bolts came with drill bits, it was easier for you to install them. After just 20 minutes, my fan had started up and was There is a lot of air coming out of it. The only issue I see is that the low setting is almost as good as medium. I wish the low fan would be noticeably faster so I can just have a gentle breeze if I'm sitting close to the In any case, my high setting works just fine. It blows enough breeze that far away to cool the area where I sit, which is about 30 feet from the fan. This fan looks great, and it comes with the bracket to mount it. One thing I did be sure to do was to buy rubber washers for where everything connects in order to prevent rattling when it comes in contact. I.
As soon as I received this fan, I found it impossible to install. I have a part known as a yoke which is supposed to be attached to the mounting bracket with a bolt. It does not even have a hole through which the bolt should be inserted. In light of the fact this fan is over $100, I think this is totally ridiculous. As soon as Amazon sends me a new fan, I'll be able to install it since it has the proper holes. However, I won't be changing the star rating for this review, but I will report an update. It is important for AirKing to control the quality of their parts if they want to charge as much for their fans as they do.
Now that I've had the fan for about two months, I know how to use it. Even though there was a missing part issue when I first purchased it, it has worked without a hitch. The Amazon game gave me partial credit for my trouble - so I went ahead and fixed it.
After a month of use, the power string that is also used for speed control was sliced When I first saw the other half of the motor still attached to the motor, I didn't pay too much attention to it. It seems the string finally came off completely yesterday and so I am unable to turn on the fan. Despite the string being broken, the fan can still be used if it can be replaced. Having tried to reach out to Amazon for help, they were unable to help so I was transferred Following an hour of listening to their automated messages, I decided to call them back once again. A few hours later, I received a phone call. In any case, the only way to fix the switch is to replace the entire motor. That sounds interesting. Do I need to replace the motor since I cannot access the switch? It sounded like she was telling me that I have no choice but to replace the motor, which is important to a fan, or to discard the whole thing. The fact there is no other way to fix this is just disappointing to me. In other words, if you think about buying this, make sure that you are prepared to replace a motor when your switch finally fails. The best thing you can do is to buy something else instead to avoid giving yourself so much wish you the best of luck if you are interested in.
Garage or shop fans like this are a great choice. The fan is a little loud at high speed, but what do you expect from a fan that is built for industrial use? In the air about 25 feet away (on high) I can still feel the air circulating around me. And good thing too, because summers in the South can be extremely humid and hot. You might want to read some complaints about vibration as well. The issue here is not an issue. There will be a bit of vibration on low, but if it's installed properly (no rattle), you cannot tell. *I cannot speak for the longevity, but I do own an 18-inch standalone fan by the same manufacturer that is still going strong after 4 years.
If I pay $120 or more for each, I shouldn't have to drill or fix them. An absolute bummer. I returned it and ordered a different brand. I don't think I was the only one with this issue, given other reviews I've read.
heavy cardboard box is the first indication that Air King cares about shipping a quality product. The trend of wearing light-colored outfits is growing too fast The cardboard is too light to ship (cheaper and less expensive to ship) and does not provide adequate Air King is not the case I am very pleased with the heavy, stiff cardboard that Air King used in shipping my 20" fan. Kudos to them. I was happy to find that the fan arrived in good There were all the pieces and it came together without any problems. While installing the back board on the wall, the most challenging part was making sure I hit the studs perfectly to hang the fan between the studs. The fan blows plenty of air, and it's not overly Since sound is nothing more than moving air, and moving air is exactly what a fan does, you can expect some sound to come from it. Even on high, its sound is not overly loud. I am not sure if I would be comfortable sleeping with it. In the garage, you'll have plenty of opportunities to work out most days when the speed is low. There is no wobble or vibration in the fan. As opposed to fans at a lower price point, you'll pay for a quality one, and the 2-speed option is more efficient It is mounted on a way. It is one of the few wall mounts that does not require a power source Having two degrees of freedom for the oscillating fans Besides being able to tip it up and down, you can also turn it side to side. We don't accept $50 or more That is allowed by 80 of the fans I have seen. Having this Air King fan means you can point it literally anywhere you want, which is worth 30% more. In addition, you receive a nice heavy duty 6-inch rim Several outfits made me laugh while shopping, especially the one with the extra long three-foot power cord You can use the Air King with a six-foot cord It was a nice touch to include the foot cord. There are no retractable pull cords, and the first six inches of the extension are metal (the first six inches where it goes into the motor are string). However, because it is a cost-saving item, I cannot criticize it. The structure is metal and powder coated with heavy duty, heavy duty, heavy duty, and heavy duty steel. Although I am still waiting to test the actual quality of the fan, it looks like I did indeed get the "good" fan I had hoped.
There is no reason these fan blades should not be balanced. They look good and push a lot of air, but their blades are clearly unbalanced. As a result, on the medium or high setting, the fan produces a terrible vibration that causes the entire wall (not to mention anything hung on either side of the wall) to shake. Since the low setting does not vibrate very much, it is really the only setting you can use. In any case, if you plan on using it in a garage, you should think twice. You may be unable to set it to anything but low if you have a husband or wife!.
Related Products For Air King 9020 1/6 HP Industrial Grade Wall Mount Fan, 20-Inch,Black
